Jump to content
SAU Community

Recommended Posts

After seeing the above, I got this one for $30 + postage.

http://www.ebay.com.au/itm/311514221310?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I'll let you all know how it goes.

Also bought this about 12 months ago from Germany. Great for rivnuts in hard to get at places, does both nuts and threads.

Not sure if the address is the same business, I just found it and used it for the photo etc.

http://www.ebay.com.au/itm/Nutserts-Nutsert-Setting-Tool-M6-M12-Riv-Nut-Rivnuts-Rivet-Thinsheet-PNT210-/230986691661?hash=item35c7e1344d:m:mf7e5tV-YTV5NApZL8tut9g

Also bought this about 12 months ago from Germany. Great for rivnuts in hard to get at places, does both nuts and threads.

Not sure if the address is the same business, I just found it and used it for the photo etc.

http://www.ebay.com.au/itm/Nutserts-Nutsert-Setting-Tool-M6-M12-Riv-Nut-Rivnuts-Rivet-Thinsheet-PNT210-/230986691661?hash=item35c7e1344d:m:mf7e5tV-YTV5NApZL8tut9g

Yeah I ended up going the same one, the only frustration was it doesnt come with M5 or M4 mandrels which would have been an obvious inclusion for such a compact tool. Who the hell uses rivnuts to hold an M10 bolt??

  • 4 weeks later...

So, I'm not sure if this actually classifies as tools but I'm really happy with these. The transition between my garage and driveway sucks. Without some boards, it scrapes the front lip even at stock ride height it ruined my OEM lip.

I have to get rid of the old board and cut a 4 x 6 on angle to replace those old boards.

12842465_1190591964299383_1392493881_o.j12722261_1190592020966044_18021644_o.jpg

  • Like 1
  • 9 months later...

Half moon obstruction ring spanner - Take that you pesky inaccessible fourth turbo nut you!

It's not quite perfect, still jams against the turbo front outlet, but better than nothing...  

32094280372_7b399f184d.jpg

32204816736_e4c3bd9ddc.jpg

  • Like 7
  • 2 weeks later...
On 11/01/2017 at 6:47 PM, V28VX37 said:

Half moon obstruction ring spanner - Take that you pesky inaccessible fourth turbo nut you!

It's not quite perfect, still jams against the turbo front outlet, but better than nothing...  

32094280372_7b399f184d.jpg

32204816736_e4c3bd9ddc.jpg

I love these! 

So good for header bolts/turbos

  • Like 1
  • 2 weeks later...
On 1/11/2017 at 6:47 PM, V28VX37 said:

Half moon obstruction ring spanner - Take that you pesky inaccessible fourth turbo nut you!

It's not quite perfect, still jams against the turbo front outlet, but better than nothing...  

32094280372_7b399f184d.jpg

32204816736_e4c3bd9ddc.jpg

Brilliant! Just ordered a set and I'll give them a go. Thank you!

  • Like 1
On ‎18‎/‎02‎/‎2016 at 5:36 PM, Duncan said:

Yeah I ended up going the same one, the only frustration was it doesnt come with M5 or M4 mandrels which would have been an obvious inclusion for such a compact tool. Who the hell uses rivnuts to hold an M10 bolt??

Me, used the M10's for attaching my Grundfos water pump to a welded up pedestal which in turn is SS dyna bolted to the pump shed floor, now I can pump water from my bottom tank to my top one....hehehe

  • Like 1

Also, what does everyone use to get to the water drain on the block, the one behind the turbo?

I tried a few different spanners and sockets and just cannot get a purchase on it, one thing I do know, when I finally get it out I an going to make one up with an extended head like 40-50mm hex bar and 50mm long as well.  Its a PITA to get to with anything decent.  Needs room for a breaker bar!!!

On 2/11/2017 at 5:47 PM, tridentt150v said:

Also, what does everyone use to get to the water drain on the block, the one behind the turbo?

I tried a few different spanners and sockets and just cannot get a purchase on it, one thing I do know, when I finally get it out I an going to make one up with an extended head like 40-50mm hex bar and 50mm long as well.  Its a PITA to get to with anything decent.  Needs room for a breaker bar!!!

I cut a spanner in half then got a larger spanner on the back of it for leverage. Just enough room to turn it with the cut in half spanner after you break it loose. 
 

  • Like 1
  • 9 months later...

Sort of; in that I have one in boxes on the shed floor.

When we moved out of the old place I've had to leave the hoist behind because

1/ I can't get 3 phase power here, and

2/ the shed roof is about 0.5m too short for the hoist I have.

So as this is kind of temporary (for a year or 3....), I grabbed one of these. Not unpacked or used yet, I haven't had a job that needed it so far but will have to change the sludge/oil in the bush basher soon enough and replace the water in the brake lines with brake fluid, both of which will give me a reason to give it a go.

Without having used it yet, thoughts from me are that it is very expensive (a full hoist is the same price or cheaper) and obviously won't let you stand under it but this is easy for clearance, has no install cost or requirements, is portable, and has no overhead clearance issues.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...