Jump to content
SAU Community

Recommended Posts

I run a R33 pump on my car with no cooler, and the only time i've had problems is when I split feed hose to the pump. The other time I had a combination of shit on my belt and the belt being too lose, it didn't make any noise, just got heavy.

  • Like 1

I had all the HICAS stuff removed (lines pump etc) and a lock bar fitted and my steering has been heavy ever since. Nizpro said there was nothing that could be done about it....

The heavy steering is not great (in fact I hate it), but removal of the HICAS system is. So much more predictable.

Before that I never noticed heavy steering on track days. Never needed anything but light hands on the wheel.

LOL. one mans heavy is another mans light. :) So take this for consideration and not fact. But R32s need a speed input into their HICAS computer. On R32s the speed signal comes from the dash cluster.

M2 2 bucks fitty is that for some reason they have messed with the speed input into the HICAS computer and the steering is defaulting to the heavy setting. Easy check is disconnect the speedo drive from the gearbox and go for a 15min drive. If the steering effort is no different then there is a problem with the speed input to the HICAS ECU

I accept payment in beer and reach-arounds

  • Like 1

LOL. one mans heavy is another mans light. :) So take this for consideration and not fact. But R32s need a speed input into their HICAS computer. On R32s the speed signal comes from the dash cluster.

M2 2 bucks fitty is that for some reason they have messed with the speed input into the HICAS computer and the steering is defaulting to the heavy setting. Easy check is disconnect the speedo drive from the gearbox and go for a 15min drive. If the steering effort is no different then there is a problem with the speed input to the HICAS ECU

I accept payment in beer and reach-arounds

Troy where have you been all my life? Did you forget your SAU login for a while there?

  • 8 months later...

Regrettably the car is up for sale.

See here http://my105.com/ListingDetails/tabid/65/p/1/k/r32/id/12232/Default.aspx

Or more photos in the GTR's And GTR Parts For Sale group on Facebook https://www.facebook.com/groups/158878344286716/.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...