Jump to content
SAU Community

Recommended Posts

That's great news Craig. I hope you work out the CAS issue soon & get back up to full power. No problems maxing out the standard injectors? I reckon they are highly under rated, especially if you've increased the flow via better pump or FPR.

even better new Leon......Problem is solved.....I now have CAS!

Car goes like stink again!......it's very neutral in balance........power is just right!

even better new Leon......Problem is solved.....I now have CAS!

Car goes like stink again!......it's very neutral in balance........power is just right!

I bet thats a relief! Great work.

Are we allowed to ask what the problem was? :)

even better new Leon......Problem is solved.....I now have CAS!

Car goes like stink again!......it's very neutral in balance........power is just right!

Mate, that is great news. Btw, that stink would be left from your last passenger. I recommend a steam clean.

I bet thats a relief! Great work.

Are we allowed to ask what the problem was? :)

It was fixed by cutting the top off a zip tie and using it as a shim on the CAS.........so in other words I had to change the angle of the CAS slightly. f**k I wish I had the money back that I had thrown at this problem. I think every expert that I know or Dad knows has either had a look at the car or tried to diagnose it. Alex and I found the problem because I decided to test my spare CAS's before biting the bullet and buying another brand new one and when changing them back and forth this time I found inconsistencies in the RPM missfire and startup....so I fiddled and applied pressure in different directions and it either killed it , cleared it or f#$ked up the idle.....at first I thought the plug was stuffed but it seems that when we had done the GB change the CAS location has changed ever so slightly.....I dont' know how either it does not make sense!

Funniest thing is one or 2 of the workshops decided to call me and Forums a waist of time and we don't know anything.

I have a small quote for them!

"IN YOU FACE MR MECHANIC!"

Craig Markland

I might just point this out to them those workshops as well!

Happy days to......onto the next part of the project!....ECU's again!

It was fixed by cutting the top off a zip tie and using it as a shim on the CAS.........so in other words I had to change the angle of the CAS slightly. f**k I wish I had the money back that I had thrown at this problem. I think every expert that I know or Dad knows has either had a look at the car or tried to diagnose it. Alex and I found the problem because I decided to test my spare CAS's before biting the bullet and buying another brand new one and when changing them back and forth this time I found inconsistencies in the RPM missfire and startup....so I fiddled and applied pressure in different directions and it either killed it , cleared it or f#$ked up the idle.....at first I thought the plug was stuffed but it seems that when we had done the GB change the CAS location has changed ever so slightly.....I dont' know how either it does not make sense!

Funniest thing is one or 2 of the workshops decided to call me and Forums a waist of time and we don't know anything.

I have a small quote for them!

"IN YOU FACE MR MECHANIC!"

Craig Markland

I might just point this out to them those workshops as well!

Happy days to......onto the next part of the project!....ECU's again!

So time to do a drag strip meet to put a time on all our mods... :)

So time to do a drag strip meet to put a time on all our mods... :)

I think SO!....I still need to get the new Box in, Change spark plugs and do an oil change first.

Plus fit new bitsph34r.gif.....wont be cracking a mid 12 second past as I don't have the E-Manage on anymore but I should get a low 13 second pass!....still not bad for a 2 tonne fat cow!

Edited by Jetwreck

.... but I should get a low 13 second pass!....still not bad for a 2 tonne fat cow!....running stock injectors.....on pump fuel

edited your post for more drama, lol

edited your post for more drama, lol

thumbsup.gif

I drove another M35 last night that does 14.4's..........I know my car is a lot quicker than that so it should be very interesting....at 18-19PSI my AFR's are at 10.8 so it's still got more in it except the AFM is stopping it....needs to be clamped somehow!

It's so good having Cams again!banana.gif

Happy days to......onto the next part of the project!....ECU's again!

Good to hear you got it sorted, bastard it was one of those seemingly intangible fixes (cable tie? Really??)

ECU's? I can help you out with that :)

Edited by iamhe77

thumbsup.gif

AFM is stopping it....needs to be clamped somehow!

It's so good having Cams again!banana.gif

Jaycar have fuel cut defeater kit that I used on my last 33. It was only $20 or so to build. It has a trim pot so you can turn the cut of voltage right down.

Jaycar have fuel cut defeater kit that I used on my last 33. It was only $20 or so to build. It has a trim pot so you can turn the cut of voltage right down.

How do you add fuel to the map with the voltage clamped so low? It's not a set figure, it changes with revs/load compared to what the ecu is expecting.

How do you add fuel to the map with the voltage clamped so low? It's not a set figure, it changes with revs/load compared to what the ecu is expecting.

I agree. If it does clamp the AFM signal to 3.9V, the ECU won't add enough fuel under highish load IMO. My car reaches 3.9V long before WOT. Nothing wrong with modifying the AFM voltage, but to run nice it needs to vary under all the conditions the ECU is looking at.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...