Jump to content
SAU Community

What Have You Done To Your Stagea Lately?


Hanso

Recommended Posts

Noticed a knock in the front end since i installed the superpro 33mm solid front sway bar. Inspected it today and noticed a gap of 6mm (3mm each side) between the fixed rib and the support bush. So i made up 2 dense rubber spacers to fill the gap and stop the knocking. While i was at it i regreased the rear whiteline sway bar bushes as there was excessive creaking from the rear end. Another day another thing fixed. Next will be the passenger side inner driveshaft boot.

post-77821-14433450552742_thumb.jpg

post-77821-14433450655372_thumb.jpg

post-77821-14433450734048_thumb.jpg

post-77821-14433450921184_thumb.jpg

Link to comment
Share on other sites

This weekend efforts on the wagon

1. Fitted the front half of my Alcon brake upgrade.

2. Drove it to WSID and ran a 12.2 (a PB).

3. Split the heater core on the way home and turned my girlfriends shoes a lovely shade of glycol green.

  • Like 2
Link to comment
Share on other sites

Whilst vaccuming out the rear seat of the Stag over the weekend I was shocked to discover that under all the wrappers, leaves, stones, nuts, random bits of plastic, crayons and multitude of other crap that had built up over the past couple of years of being the famliy hauler...there is actually carpet back there. Who woulda thunk it. Somehow, it's still beige, and it's remarkably clean.

  • Like 1
Link to comment
Share on other sites

After waiting for a VSS from Nissan for 3 weeks this beast is back on the road. And it was nice to see the previous owner change all the fluids except the transfer case in 18 years. It was very brown to say the least. Felt good to drive it again.

post-137697-0-90281000-1443534462_thumb.jpg

Edited by CaSilvia
Link to comment
Share on other sites

1. Paddle shifter from V35 GT-8. Took of the leather wrap underneath is aluminium, I sanded it and polished. I can post a wiring diagram for anyone wants to do it.

2. Strutbar from Aliexpress.

3. Clock from a G35 through Ebay.

  • Like 1
Link to comment
Share on other sites

1. Paddle shifter from V35 GT-8. Took of the leather wrap underneath is aluminium, I sanded it and polished. I can post a wiring diagram for anyone wants to do it.

2. Strutbar from Aliexpress.

3. Clock from a G35 through Ebay.

That looks way better then the after market setup. And price looks possibly better. How is the feel?

And yes show us your wiring diagram :)

Link to comment
Share on other sites

No. That one on Ebay is for a later model V36-37, and its hard work to modify. V35 GT-8 look like this and its a direct fit. Just remove the steering wheel and line up the holes. You will also need the top and bottom steering shroud if you want to return your car back to way it was.

post-94823-0-57536500-1443676368_thumb.jpg

post-94823-0-16504400-1443676375_thumb.jpg

post-94823-0-37900600-1443676392_thumb.jpg

post-94823-0-62814800-1443676407_thumb.jpg

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

1. Paddle shifter from V35 GT-8. Took of the leather wrap underneath is aluminium, I sanded it and polished. I can post a wiring diagram for anyone wants to do it.

2. Strutbar from Aliexpress.

3. Clock from a G35 through Ebay.

Any noticeable improvement over stock for the brace? Also price on the g35 strut brace?

Link to comment
Share on other sites

Have a look at the front suspension, notice the strut isn't actually a part of the front end geometry or hub like the 33/34 skyline, it just provides downforce through the lower bush. Hence why the strutbrace makes no difference.

If you want to tighten the front end you need to brace the compression arm as Nissan did with the series 2 V35's (Dale's brace or OX motorsport), and use the Superpro poly compression bush.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Been poking around on the new to me car. I've determined that I have a Kakimoto exhaust from at least the downpipe back (I haven't confirmed the downpipe yet). It has a catalytic converter. Other than the company branding on the exhaust tip, I can only find one other marking. Behind the cat and under the car is a plate that has the numbers "NF307FP" and "M11111". Unfortunately, the Kakimoto website is written in Japanese and my browser won't translate it. I found that Nengun sells the brand, but my exhaust doesn't look like their current offering. They do indicate that each pipe is custom made, but I assume that's more of an inventory control thing than some sort of special, vehicle specific tuning. Anyone have a guess about what I have here? I'm getting ready to throw some dollars at tuning this car, but want to make good decisions. No reason to throw out a perfectly good exhaust system, if this thing will equal a full custom build.
    • Congrats on the progress. That's got to feel good to get the build done/mostly done. Now that you're this deep into it, I'm curious if you'd do it again versus finding a 5MT from the get go?
    • G.G.C. (Gibier German Cook) restaurant in Motomachi in Kobe: A tiny 2 floor restaurant that was founded in 1976. The original couple who owned/ran it retired and sold the business to a corporation who pretty much tried to keep it the same as it was.  Lots of lesser known (to me anyway) German beers available.  Venison with vegetables. The meat came from deer from Hokkaido. The chef told us that there's a whole industry around the use of all parts of the deer from the antlers to the hooves. Sure enough, directly accross the street from this restaurant is a shop that sells all manner of utensils, clothes and objet d'art all made from deer skin, bones and horns.... also owned by the same corporation. The venison was super tender 😋 Various decorations, a lot of which were quite old, no doubt from the original owners. A nice pilsner too which I'd never seen before.  It's well worth a visit but check the opening hours, they're closed on Wednesdays, only open 11:30am - 3pm on Mondays and Tuedays, 11:30am-3pm for lunch and 5pm-11:30pm on Thursdays, Fridays and Saturdays, and 11:30am-3pm and 5pm-9pm on Sundays. Last order is 30mins before close.
    • Yep around 2m long or thereabouts.  I made another post in the photo diaries 17 years later lol. I swear it has not been that long!
    • Full results via link below https://docs.google.com/spreadsheets/d/1inu1mRRO0WjV2-3vGYsjnmYggVOzmApWOby68GwPGcI/edit?usp=sharing  
×
×
  • Create New...