Jump to content
SAU Community

Recommended Posts

They do know the main 120L tanks capacity, but they don't know the level in the 10L swirl pot that's inside the tank bladder.

The car should start with 120L and a full swirl pot.

So in theory using 1.2L/km they should be able to go 108km's at race speed which the other 3 nissans did.....

Problem rick would have had was that he had several cars wanting his position so he'd have been using more fuel during the race to maintain position.

Who knows why but the older engines are still running group fired injection and single coil dizzy setups. The nissans and Mercs are fully sequential multi coil arrangements but they can't get onto the consumption of the dinosaur push rod engines, they are just that efficient.

Brad, I was under the impression (from the Motec V8 support personal) that the COTF engines are all sequential and individual coils (powered by the new M1xx series ECU's) The teams had the option of running either group or sequential firing on the old engines (with the M880 ECU), with most using group fire as it left a few outputs available to be used elsewhere on the car, prior to the development of PDM's E8xx and SVIM's.

They are correct.

The COTF engines are run sequentially. The holden version is based on the LSX engine frame from GM performance.

The older aroura engines most of them are using are still being run in the exact same way as they were last year. Grouped with single channel CDI and coil.

I'm not aware of anyone using the V8 supercars supplied and homologated engines that are seq run. Perhaps when other manufactures come that don't produce a V8 we will see those engines being used.

The pace built and V8 supercars owned chassis do have the homologated "off the shelf" engines fitted.

They do know the main 120L tanks capacity, but they don't know the level in the 10L swirl pot that's inside the tank bladder.

The car should start with 120L and a full swirl pot.

So in theory using 1.2L/km they should be able to go 108km's at race speed which the other 3 nissans did.....

Problem rick would have had was that he had several cars wanting his position so he'd have been using more fuel during the race to maintain position.

Who knows why but the older engines are still running group fired injection and single coil dizzy setups. The nissans and Mercs are fully sequential multi coil arrangements but they can't get onto the consumption of the dinosaur push rod engines, they are just that efficient.

Thought the COTF tanks were 112 litres or similar?

  • 4 weeks later...

Nobody mentioning that Gary Rogers will be running two Volvos next year?

Good to see the series kicking a few goals re manfacturers. Next test will be to get some satellite series going and then have a 4 World Championship rounds. Spa, Bathurst, a US circuit and Silverstone or something

  • Like 1

Nobody mentioning that Gary Rogers will be running two Volvos next year?

Good to see the series kicking a few goals re manfacturers. Next test will be to get some satellite series going and then have a 4 World Championship rounds. Spa, Bathurst, a US circuit and Silverstone or something

Yeah good on em for taking the punt!

It will upset a lot of people but i like the fact that its not just the old Bogandore and Foulcans!

I don't think it will upset many at all.

There are a LOT of diehard fans... They may not be upset now but when the other makes catch up and start winning races they might ;)

I don't see any of the new manufactures winning races anytime soon. I think the mercs will probably be the first to do it, followed by the volvos and then the Nissans (if they ever actually win, which I doubt with the current driver lineup)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...