Jump to content
SAU Community

Recommended Posts

Where am I at ?  as usual here now prob a dump of accumulated months and months

 

I have decided to do some upgrades both to advance the car and also create a spares package to reduce time off track should something occur... all the theories

 

there is engines, bodywork, technology and just stuff....

 

So pulling the car basically all apart

 

1338506909_PullCarapart.thumb.jpg.5ff1bf27854538dc53444693dfcbc4b5.jpg

New engine will be built to rb28 specs the current decent built rb25 will be a spare

Head starts as a hydro rb25 head but full porting, supertech solid conversion + other goodies also the usual Kelfords etc etc

100802806_NewBlock.thumb.jpeg.25015a86fd8df730bf276750bf2ca456.jpeg233962441_Supertechhead.thumb.jpg.e94e203453cfbd24f4471a16777f0f4b.jpg

 

I use a 5 - 0 Ignite trigger kit - they upgraded me to their new 36 -2 situation

561985748_36-2Trigger.thumb.jpg.20815cb8f9e878680e6e906050952af8.jpg

 

Updating the rad - the Koyo has done its job and moving to a PWR crossflow

1783599634_PWRCrossflow.thumb.jpg.e1b7d47ee7b98ec869ca32679082870e.jpg

 

Ive been running 9.5" rims with 265/35 tyres up front to date - they have done the job but really are struggling and get torn to pieces so move to big boy tyres means alot of changes - going to 295/35 is a huge diameter jump and some width

New TC105X 18 x 10.5 + 12s acquired

1341984097_TC105Xrims.thumb.jpg.4b550571762adf1ccd6589a3317bbf53.jpg

 

A struggle is to fit the combo into the arch etc as it hit alot of places so we added some inner clearance modding the J arm and now all fits nicely

443196927_ModdedJarm.thumb.jpg.8e62fa099e2f03476694062b4d657c23.jpg1742659781_BigTyreJarmclearance.thumb.jpg.54beab86ecdfd756fae958f4849b857a.jpg

 

Have gone the Motec dash route for data - not that i know what Im talking about but others do so they can use the info

1169466629_Motecc125dash.thumb.jpg.034fc31906006cea23e915ba5660da7f.jpg

 

One of the upgrades is also Bosch MS ABS for braking and outward sensors for wheel speed allowing lots of data for the likes of traction control, the diff guy to get info and blaa blaa

733778107_BoscheABSgear.thumb.jpg.01c8ccd6097b771ce4c789cf52b37fd1.jpg19684342_FrontHub.thumb.jpg.f51b1fe4d3ce36024b813d2c907c856e.jpg806018363_RearHub.thumb.jpg.1b76472adec870c7916ca66e4b16221d.jpg

 

 

 

I think thats it for now

Edited by bcozican
  • Like 7

Says Mr. engine and upgrades himself 😄

Eh not here to be showy, but also got nothing to hide on my build have spent lots yeop and just hope I go faster lol

I just got inspired and sort alot of info through reading about cars on this forum so put it out there in case someone has a question or might want to try something 

Ye I prob seem like ABS fan boi been talking about it for ages finally just threw it in the f*ck it bucket and bit the bullet

 

  • Like 1
  • Haha 1

yes to traction control the sensors are there so why not - it'll be through Haltech - I know there are better out there but cant have everything... yet. How good it'll be will be interesting and up for debate till proven in a practical situation

Interesting for those playing at home, apparently outboard sensors on the hubs vs using those in std gtr etc off the diff increases the accuracy of the data dramatically as there is so much chatter that comes off the diff

  • Like 1

f**k me, 10k for the ABS? 

Will be interesting to see how the difference feels.  I've been living with 3 channel, 30 yo ABS for a long time, would be very interesting to see how it feels back to back.

  • Haha 1
On 7/29/2022 at 3:13 PM, Duncan said:

f**k me, 10k for the ABS? 

Will be interesting to see how the difference feels.  I've been living with 3 channel, 30 yo ABS for a long time, would be very interesting to see how it feels back to back.

That was my reaction when I looked at pricing. 

Given I am about to replace my master, is it worth me trying to implement basic Nissan ABS? I was also under the impression it was not suitable for motorsport. 

I'm just going to a BM57 to match the 350z Brembos - the car has never had ABS. 

Edited by ActionDan
On 29/07/2022 at 1:13 PM, Duncan said:

f**k me, 10k for the ABS? 

Will be interesting to see how the difference feels.  I've been living with 3 channel, 30 yo ABS for a long time, would be very interesting to see how it feels back to back.

Ive been living with no ABS

back to back will be hard considering I am making so many changes at once but obviously feel etc blaa blaa

I also saw it (we all stretch for any justification in these circumstance's) as a combo thing coupling the traction control - so that halves the cost ???  bahaha

  • Like 1
On 29/07/2022 at 1:21 PM, couchboy said:

The J arm mod, did you do it just for that section because it was the most like aera to hit the tyre and also did you think about carrying it around to the top were it bolts to?

20220729_171943.jpg

It was the first incarnation of this thought process

The tyre shouldnt reach there any tyre deflection under load should be squish which is sideways so shouldn't need ? 🤷‍♂️

Also need to add bracing to the back of it for support

  • Like 1

I have all adjustable arms etc but yeop bolted up fine

I now know of 2 more r32 gtst and an R32 GTR running r33 / r34 gtst (same) front knuckles also - so should bolt up fine  * all have fully adjustable arms though

Edited by bcozican
  • Like 1

Got a new diff built 

 

S15 housing to match what my current one is 

Nismo GT pro 1.5 centre

Neat gearbox new 4.11 gear set shot peened & polished

Gktech rear cover for extra oil - takes 2.1 ltrs all up

 

Moving from my current 3.7 gearing to 4.11 to make use of more engine and revs and bigger profile tyre means I was geared to break land speed records and the gear although was nice and 'safe' to roll around at relatively low revs really wasnt right

my current diff is built almost to the same specs - will be going 4.11 also and be a spare, hopefully I never have to use it though!

Diff 1.jpg

Diff 2.jpg

Diff 3.jpg

Diff 4.jpeg

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...