GTSBoy Posted February 19, 2016 Share Posted February 19, 2016 Yuh. Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7685940 Share on other sites More sharing options...
XKLABA Posted February 19, 2016 Share Posted February 19, 2016 Injectors, like others have said don't match the power My 1250's are totally maxed out at similar hp on what some would say is a generous dyno (when I say totally maxed out they run over 120% duty haha) What base pressure are you running ? Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7685941 Share on other sites More sharing options...
SimonR32 Posted February 19, 2016 Share Posted February 19, 2016 (edited) pardon my ignorance, but how you open injectors for more than 100% of the time? is it calculating say a 36ms required pulse width when the cycle time is only 30ms, but in reality, the injector has saturated? It's calculated on time from close to open to close. Over 100% basically means they never close fully What base pressure are you running ? Standard 3bar from memory plus a health 30psi bump when it comes on boost haha Edited February 19, 2016 by SimonR32 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7685996 Share on other sites More sharing options...
Dose Pipe Sutututu Posted February 19, 2016 Share Posted February 19, 2016 This was a year ago on 13psi and pump gas (and i guess it was 480whp) https://www.youtube.com/watch?v=st9cO2XkG8A What kind of bullshit dyno run is that? Couldn't even turn up the volume and the run was over. 2 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686068 Share on other sites More sharing options...
Hadouken Posted February 19, 2016 Share Posted February 19, 2016 Am I still the only one wondering how a 33 can be complied in the states? Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686080 Share on other sites More sharing options...
admS15 Posted February 19, 2016 Share Posted February 19, 2016 Am I still the only one wondering how a 33 can be complied in the states?Maybe, coz racecar[emoji12] 1 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686082 Share on other sites More sharing options...
Dose Pipe Sutututu Posted February 19, 2016 Share Posted February 19, 2016 Am I still the only one wondering how a 33 can be complied in the states? Maybe on paper it says it's a kit car? So car came in all bits and pieces and they legoed the shit out of it and now bares Honda plates? 1 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686162 Share on other sites More sharing options...
iruvyouskyrine Posted February 19, 2016 Share Posted February 19, 2016 Am I still the only one wondering how a 33 can be complied in the states? They didn't import them they just sailed them over and keep them docked in the harbour when not using them on land. 4 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686221 Share on other sites More sharing options...
Rickyv42 Posted February 19, 2016 Share Posted February 19, 2016 The R33 is actually the one you can import. It's a bunch of dumb rumors that make people think you can't. Here's a list of cars that can be imported. Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686230 Share on other sites More sharing options...
mr skidz Posted February 19, 2016 Share Posted February 19, 2016 (edited) Weird, learn new shit every day. Edited February 19, 2016 by mr skidz Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686233 Share on other sites More sharing options...
Jc052685 Posted February 19, 2016 Author Share Posted February 19, 2016 What kind of bullshit dyno run is that? Couldn't even turn up the volume and the run was over. Not sure what you are talking about... Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686234 Share on other sites More sharing options...
Robzilla32 Posted February 19, 2016 Share Posted February 19, 2016 Am I still the only one wondering how a 33 can be complied in the states?Another American guy posted about this recently. I think that the required crash testing was performed a while ago so they can be imported. Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686236 Share on other sites More sharing options...
XKLABA Posted February 19, 2016 Share Posted February 19, 2016 Standard 3bar from memory plus a health 30psi bump when it comes on boost haha I set my base pressure off max recommended pump pressure minus 30psi boost pressure Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686282 Share on other sites More sharing options...
Dose Pipe Sutututu Posted February 19, 2016 Share Posted February 19, 2016 Not sure what you are talking about... Ramp rates way too quick Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686297 Share on other sites More sharing options...
Jc052685 Posted February 19, 2016 Author Share Posted February 19, 2016 Ramp rates way too quick 2000lb of rolling inertia.... 1 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686316 Share on other sites More sharing options...
s2d4 Posted February 20, 2016 Share Posted February 20, 2016 (edited) What kind of bullshit dyno run is that? Couldn't even turn up the volume and the run was over.Not only that, that's at least 80hp more than oz cars.But whatever really, he is in the US and compares to US cars. Edited February 20, 2016 by s2d4 Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686389 Share on other sites More sharing options...
r32-25t Posted February 20, 2016 Share Posted February 20, 2016 We have should open another set of dyno threads but for USA cars only cause our dynos aren't conparable Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686409 Share on other sites More sharing options...
mr skidz Posted February 20, 2016 Share Posted February 20, 2016 (edited) In regards to your comments on the other dyno results thread in relation to Z32's in America making 500 wheel horsepower with stock turbos. that's again about 200hp at the Wheels more then I personally saw on my Z32 and mine had slightly higher flowing turbos from what I was told and it did have bigger intercoolers on both sides as it was a limited Steve Millen limited edition version which had some aftermarket options thrown in and twin 3 inch exhaust straight through and a huge K&N air filter sitting right at the front grill so you could say there was no restriction in front or behind these turbos. we ran them at 15 & 17psi and apart from more low down response we found virtually no extra power over 13psi. which was basically where those little T25's are most efficient anyway and anyone who has owned a Z32 knows they can run hot at the best of times so no point pushing the little turbos Beyond the limits for f/a gain. The 13psi got us 301 AUS hp at the tyres so way off the 500 USA hp! It's a 15 year old article from autospeed but still up... http://www.autospeed.com/cms/article.html?&title=Stillen-Sizzler&A=1003 Edited February 20, 2016 by mr skidz Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686435 Share on other sites More sharing options...
Super Drager Posted February 20, 2016 Share Posted February 20, 2016 In regards to your comments on the other dyno results thread in relation to Z32's in America making 500 wheel horsepower with stock turbos. that's again about 200hp at the Wheels more then I personally saw on my Z32 and mine had slightly higher flowing turbos from what I was told and it did have bigger intercoolers on both sides as it was a limited Steve Millen limited edition version which had some aftermarket options thrown in and twin 3 inch exhaust straight through and a huge K&N air filter sitting right at the front grill so you could say there was no restriction in front or behind these turbos. we ran them at 15 & 17psi and apart from more low down response we found virtually no extra power over 13psi. which was basically where those little T25's are most efficient anyway and anyone who has owned a Z32 knows they can run hot at the best of times so no point pushing the little turbos Beyond the limits for f/a gain. The 13psi got us 301 AUS hp at the tyres so way off the 500 USA hp! It's a 15 year old article from autospeed but still up... http://www.autospeed.com/cms/article.html?&title=Stillen-Sizzler&A=1003 Umm sorry to say but there are already a few Z32's making 300rwkw on stock turbos and not a lot of work done, E85 works wonders along with some other bits that have been developed in the last few years. Friends 300ZX made 300rwkw @ 20psi on a catback, SMIC, Top feed/E85 setup and hits 250rwkw @ 4000rpm. Mine makes a bit more than that with 3" dumps, 2.5" cooler piping and 22PSI. Your one not making power past 13PSI would indicate turbos from the auto model 300ZX with tiny turbine housings. To be clear what "record" are we talking about? GT2860-5's on their own? On an RB? on any engine? If dyno dynamics, A member on AUS300ZX made 492.5rwkw @ 28PSI with them. If RB, i'm fairly sure i saw 474rwkw from a 2.8L GTR somewhere on here. If its the Dynojet record then its well north of 750rwhp from what i remember. Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686447 Share on other sites More sharing options...
sneakey pete Posted February 20, 2016 Share Posted February 20, 2016 Are you 100% sure that z32 result wasn't gtx2860s? Anyway you seem to be possibly missing his point about using a Japanese car that has been sold in both markets then getting tuned with a stockish setup to compare general dyno numbers Link to comment https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/page/5/#findComment-7686451 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now