Jump to content
SAU Community

Recommended Posts

4 hours ago, Dose Pipe Sutututu said:

@robbo_rb180 they're a pretty decent street/track pad as they give you near track pad performance but a street pad feel, ie not much heat required.

New day, new part, and wasted more money ?

Now to find time to delete the haram clutch dampener. 

20200806_135024.thumb.jpg.5b671dc85d9bb13ab5643802841fd8d2.jpg

When I did this I didn’t notice any difference. The R4C feels the same wouldn’t even know I changed my lines 

3 hours ago, WR33KD said:

When I did this I didn’t notice any difference. The R4C feels the same wouldn’t even know I changed my lines 

I think I did a potato job at bleeding the clutch before and might not be 100% free of air hence the spongey pedal. At least with this simplification it's going to be much easier to bleed.

1 hour ago, Unzipped Composites said:

Did it feel like you were going to capsize? Coming into turn 2 on the trapeze like:

 

spacer.png

Lololol.. wallah running trim tabs, dw cuz, Moey Don't Worry said these will fix.

images.jpeg.c6bc3669ea46f3f50d53617f508be161.jpeg

  • Haha 3
7 hours ago, ActionDan said:

Why do you want to damage that car so much lol 

Because it's still under warranty, and why buy a SUV and not use it properly right? Out of the Tiguans on the Tiguan group on Facebook I would say I treat mine with the respect it needs. Plenty of LCs, off road adventures and coolant leaks.

 

3 hours ago, Count Grantleyish said:

Reliability testing. 

legit this... will test it until it's nearly out of warranty and will sell it lol

59 minutes ago, Dose Pipe Sutututu said:

Because it's still under warranty, and why buy a SUV and not use it properly right? Out of the Tiguans on the Tiguan group on Facebook I would say I treat mine with the respect it needs. Plenty of LCs, off road adventures and coolant leaks.

 

legit this... will test it until it's nearly out of warranty and will sell it lol

Word

Some people couldn't believe I thrashed my STI along dirt roads in the boondocks of Queensland and NSW.

I cannot see the point of owning a niche car and not beating on that niche.

If not, they should just buy Corolla.

End of old man rant.....

  • Like 1
  • Thanks 1

Oh I get that, some people are upset because my side steps are dented and I've added scratches to what was a fairly neat low k's Prado, but in the end it's just a car and I wanted to go exploring and learning. 

That said, you seem to be going a step further and actively trying to break it lol 

Broken from usage and broken from rape is different ;)

  • Like 1
  • Haha 1

Somewhat a proper update?

Last Saturday my mate came over to help me remove the diff (because I was lazy and was going to drop the car off at the diff shop instead). Yesterday I dropped the diff unit at Smithfield Diff & Gearbox and today Anthony gave me a call said my diff was locking more on one wheel than the other and the clutch discs inside were fairly scuffed.

He suggested he would clean up the discs, remove the scuff marks and re-arrange the plates so the lock can be evenly distributed. At the same time the diff unit will get new seals, new bearings and backlash re-adjusted (as there was some play, due to wear and tear). Was advised that there will be a little bit of whine as the crown is a little thrashed, however I said that's fine as it's not a street car.

Will be getting it back early next week and will spanner check the car for the 14th of September at Wakefield. Have quite a few mates going:

  • 3x EVOs
  • 2x Mirages (both turbo charged)
  • 3x Nissans
  • 1x Honda with K20 Swap
  • Like 4
21 hours ago, Dose Pipe Sutututu said:

Was advised that there will be a little bit of whine as the crown is a little thrashed

pfft, should've heard one of the diffs in my R31. Was louder than a truck air breaking.

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...