Jump to content
SAU Community

Recommended Posts

2 hours ago, admS15 said:

Or she's worried you'll start modifying the M3 and it'll end up just like the skyline anyway. 

100% this, it would just end up being a new black hole for the funds to be shovelled into lol. 

  • Haha 2

If course he would modify it

It would be so easy to get some good power out of it with "dis and dat"

I have the same disease, I cannot leave things alone, even things that you don't really need to do, or even should do, because, "why not", like basically everyone else on this forum to varying degrees 

Or, he would spend the next 10 years fixing all the typical Euro issues as Uncle Duncan has stated 

  • Haha 1

So for the longest time, I used the Haltech canbus keypad to turn on or off the AC compressor because for some reason the HVAC controls kept turning the compressor off as soon as it went on.

Turns out the stupid AC Thermistor BS had died like all the other Nissan shit boxes in the 90s shit box era. Been trying to find a suitable replacement but it's discontinued and the modern ones from other Nissans are 6x pin.

Fear not, after mindless SAU research it turns out you can crack open the thermistor circuit and replace the fked cap, that I did (take note on that white piece of mdf).

PXL_20240129_014732418.thumb.jpg.8fcdecf10de5cedd6f148af791718b52.jpg

PXL_20240129_014937150.thumb.jpg.2b466cce64edc1b09220888d64efb9d8.jpg

AC now working as expected and the HVAC controls work perfectly.

Now the fun part, went to park up the shit box just then and now there's a pile of coolant. Seems like it's coming from somewhere between the motor and box, fk this piece of shit. Also as I was looking for the leak, that white piece of MDF I used as a makeshift shelf, it snagged on my shirt and landed on the bumper, taking a chuck of paint off.

Lol.

So TL;DR, AC fixed, new coolant leak and chipped paint off the bumper.

  • Like 4

Nissan shit box things.

Can't see any leaks from the heater hoses, anything behind the head, or engine bay.

I suspect maybe it's a welch plug on the block near the flywheel area.

Fk this car.

  • Sad 4
9 hours ago, niZmO_Man said:

perhaps there was a pool of coolant in the chassis or subframe and it finally escaped??

I think there a tiny bit left over in the expansion tank and lines which have been removed/spilled some down in between things.

Just funny to see the green through an empty bay. 

  • 3 weeks later...

That makes it 2x broken cars at home.

Both kind of work, one leaks coolant when warm one skips 1,3,5,7 gears when warm.

IMG-20240217-WA0002.thumb.jpg.85854057d11fa7913ebb661f67e288b1.jpg

Screenshot_20240217-143149.thumb.png.559dc841fe75ee228fa49431ffd082d3.png

Lol.

 

  • Haha 2
  • Sad 3

Is it still under warranty? Ducken VAG crapbox.

My wife's ford focus junk dct did something similar a few years back, was borked TCM module.

Recently it intermittently didn't want to release clutch and would just be in neutral for a few seconds. Clutch fork was binding randomly from clutch dust build up. Some brake cleaner, a spline tool and working the clutch fork back and forth manually sorted it.

Unkind reminder that VW SUV significantly less expensive and way more reliable than BMW sporty car. let alone a modified BMW sporty car.

  • Like 2
21 minutes ago, Kinkstaah said:

Unkind reminder that VW SUV significantly less expensive and way more reliable than BMW sporty car. let alone a modified BMW sporty car.

Can we get this pinned some where 

  • Like 2
  • Haha 1
1 hour ago, admS15 said:

Hopefully they do a goodwill repair on it. Fingers crossed for you 🤞

I hope so, hope being loyal to the stealership has some positive(s).

Shitbox has been exclusively serviced by VW, even though I could do it myself for heaps less.

In good news for Euro car buyers, manufacturer warranty is not relevant. Under Australian Consumer Law, what you buy has to be free from major defects for a reasonable period. And if its not you get to choose between replace, refund or repair. VW were specifically done in 2018 for not complying.

https://www.accc.gov.au/by-industry/cars-and-vehicles

So, just say it is not reasonable to have this failure so soon, and ask for your money back, and buy a nissan.

Of course, there is a possibility that they will disagree and you spend the next couple of years in court trying to prove it

  • Like 2

Thanks @Duncan let's see how I go next week.

For good measure, just happened again. Daily occurrence 🥲

Will get it fixed and wait till the Minister of War & Finance is back to work so we have more cash flow instead of torching our savings before we buy a new shit box (won't be a Nissan, soz).

IMG-20240218-WA0010.thumb.jpg.b07fe53441603a2ce0bbc7e9941b1637.jpg

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...