Jump to content
SAU Community

Recommended Posts

Cause no one stays st those power goals they always go bigger and then youre replacing injectors again, also with current technology injectors you can get a 1000cc injector to idle and cruise perfectly 

7 hours ago, TXSquirrel said:

You Aussies have nothing to complain about, you have had Skylines for decades and you have ute!  I would love to have an ute as a daily driver with a R32 for weekends.

speaking from experience it's pretty great :D

9 hours ago, TXSquirrel said:

You Aussies have nothing to complain about, you have had Skylines for decades and you have ute!  I would love to have an ute as a daily driver with a R32 for weekends.

Not gonna lie, its pretty good :)

 

 

111.jpg

222.jpg

  • Like 2
16 hours ago, Robzilla32 said:

It must be my inner bogan but that combo is starting to grow on me...

It's incredibly comfy and is good for transporting gtr parts lol and then the gtr when you need the speed fix the xr6 turbo can't deliver 

40 minutes ago, r32-25t said:

It's incredibly comfy and is good for transporting gtr parts lol and then the gtr when you need the speed fix the xr6 turbo can't deliver 

Good for towing the GTR too :D

27 minutes ago, Dose Pipe Sutututu said:

good for picking up engines too, especially after you've just blown the oil pump and the rest of the engine decides to kick the bucket too lol. 

Fyp 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...