Jump to content
SAU Community

Recommended Posts

They don't seem to be included in last week's compulsory recall. https://www.productsafety.gov.au/recalls/compulsory-takata-airbag-recall/takata-airbag-recalls-list#id12

I'm not aware if Nissan issued a previous voluntary recall, but go here and run your VIN to check: http://www.nissan.com.au/owners/owner-information/takata-airbag-recall

  • Like 2
1 hour ago, alex182 said:

They don't seem to be included in last week's compulsory recall. https://www.productsafety.gov.au/recalls/compulsory-takata-airbag-recall/takata-airbag-recalls-list#id12

I'm not aware if Nissan issued a previous voluntary recall, but go here and run your VIN to check: http://www.nissan.com.au/owners/owner-information/takata-airbag-recall

Good info! 

  • Like 1
  • 7 months later...

Hi guys, I just saw a recent episode of 60 Minutes about Takata's exploding airbags so jumped on the IMABS website to see if our cars are affected and got the below message advising that it's unrecognised our their database possibly because it's an import so I rang Nissan and after a few transfers got to a public relations department and they couldn't advise definitively if our cars are affected or not because it's an older grey import. 

I don't know. I'm a bit concerned and was wondering if anyone has had any luck in finding out further details?

Thanks.

image.thumb.png.aff21c47d4ad66abaf1e36f834913134.png

59 minutes ago, Robocop2310 said:

Thanks guys.

I have a 1996 R33 GTR and 1999 R34 GTR.

Anyone with similar care having got the all clear? I have rung Nissan several times and they have not been forthcoming.

If your car is an import Nissan Australia won't give a shit. That's how it works.

2 hours ago, Old Rev Head said:

I have a 96 R33 twin airbag, rang Nissan Australia and spoke to customer relations. Gave them the Aussie VIN and Nissan original chassis number and got the all clear on that one.

 

9 minutes ago, Ben C34 said:

If your car is an import Nissan Australia won't give a shit. That's how it works.

Old Rev Head seems to have had some luck.

1 hour ago, Ben C34 said:

Aussie vin. I take that as being an Aus delivered car in which case they do care.

Car was imported to Australia 15 years ago by my father, and was first registered here 3 months ago, (don;t ask that's for another time). The 6U number is stamped into the body by the RAWS when it gets to Aus to comply with A.D.R. laws.

Can SAU write to Nissan as a club or try contacting them as I don’t know about others, but I hate uncertainty and I’ve tried contacting them and as some have corrected said they don’t give a damn about grey imports. 

Like most, I don’t want to lose an eye or have half my face mangles by an airbag that’s suoopsss to safe lives. 

It took half a minute to find this info:

http://www.ironchefimports.com/2017/07/24/takata-airbag-recall-for-dummies/

which leads to:

http://www.nissan.co.jp/RECALL/search.html

Search. Confirm. Relax (or freak out depending on the results)

 

  • Like 3
  • Thanks 1
2 hours ago, GTofuS-T said:

It took half a minute to find this info:

http://www.ironchefimports.com/2017/07/24/takata-airbag-recall-for-dummies/

which leads to:

http://www.nissan.co.jp/RECALL/search.html

Search. Confirm. Relax (or freak out depending on the results)

 

I'll make this an easy-to-find link on the site. Thanks for posting.

  • Like 1
5 hours ago, Dose Pipe Sutututu said:

simply just too old

has any ever had their 90's era car air-bag go off? wondering if they even work at all

 

Edit: I've hit a few kangaroos and never set anything off, but not sure how much of an impact is required.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...