Jump to content
SAU Community

Recommended Posts

On 08/01/2021 at 12:32 PM, BK said:

Hey Rob. Yeah mate that's the one. Got it from RHDjapan.

Hi BK,

I bought the Garage Active washer / overflow bottle set. It shipped with two washer hoses. One goes to the Y junction for the two front washers. Any idea what the other is for or is it just a spare? The rear washer hose is a single piece that runs all the way from the bottle to a valve mounted just in front of the parcel shelf so is much longer.

Thanks

Rob

On 19/07/2021 at 5:14 PM, Robzilla32 said:

Hi BK,

I bought the Garage Active washer / overflow bottle set. It shipped with two washer hoses. One goes to the Y junction for the two front washers. Any idea what the other is for or is it just a spare? The rear washer hose is a single piece that runs all the way from the bottle to a valve mounted just in front of the parcel shelf so is much longer.

Thanks

Rob

Hey Rob. Yeah I didn't even fit the new lines that come with them, still have them here as I though the ones on the car were already good enough. I didn't even unravel them to check the lengths but it seemed like a fair bit, but I'd assume they'd be to replace the whole lot be wouldn't they ? From memory the tubing that came with them is a smaller diameter than standard too. So you're saying they didn't include enough tube to replace it all ?

On another completely unrelated note on the state of these shitty times I'm getting pretty twitchy with this whole Covid-19 lockdown shit around the country. 3 cases recorded in Adelaide today could ruin getting these cars tuned. I'm currently holding my breath and have my fingers, toes, legs and dick crossed NT doesn't shut the border to SA this week !

On 7/19/2021 at 9:25 PM, BK said:

Hey Rob. Yeah I didn't even fit the new lines that come with them, still have them here as I though the ones on the car were already good enough. I didn't even unravel them to check the lengths but it seemed like a fair bit, but I'd assume they'd be to replace the whole lot be wouldn't they ? From memory the tubing that came with them is a smaller diameter than standard too. So you're saying they didn't include enough tube to replace it all ?

On another completely unrelated note on the state of these shitty times I'm getting pretty twitchy with this whole Covid-19 lockdown shit around the country. 3 cases recorded in Adelaide today could ruin getting these cars tuned. I'm currently holding my breath and have my fingers, toes, legs and dick crossed NT doesn't shut the border to SA this week !

Adelaide will be fine mate. But just incase my dick is also crossed .

 

On 19/07/2021 at 10:43 PM, Ben C34 said:

Adelaide will be fine mate. But just incase my dick is also crossed .

 

Well they'd better be both firmly in knots now that you guys are going into lockdown for 7 days !

Now Adelaide has went 💥 I'm really stressing the fk out hard ...

 

On 19/07/2021 at 9:55 PM, BK said:

Hey Rob. Yeah I didn't even fit the new lines that come with them, still have them here as I though the ones on the car were already good enough. I didn't even unravel them to check the lengths but it seemed like a fair bit, but I'd assume they'd be to replace the whole lot be wouldn't they ? From memory the tubing that came with them is a smaller diameter than standard too. So you're saying they didn't include enough tube to replace it all ?

On another completely unrelated note on the state of these shitty times I'm getting pretty twitchy with this whole Covid-19 lockdown shit around the country. 3 cases recorded in Adelaide today could ruin getting these cars tuned. I'm currently holding my breath and have my fingers, toes, legs and dick crossed NT doesn't shut the border to SA this week !

Commiserations on lockdown impact. I'm in Melbourne so understand that alright.

The two supplied hoses are a bit longer than the front hose to the Y junction which is about half the length of the rear washer hose. I assume the intent is that you cut the supplied hoses to match the length of the three pieces required to connect to the front nozzles.

The rear hose has melted at points so it was coming out anyway and I have a replacement ordered.

  • 2 weeks later...

Obviously I made it to Adelaide with both 32 GTRs.

I am the 3rd car and 1st manual car to be on the new Prohub 3000 dyno. Quick set-up -

20210803_123022.thumb.jpg.97f37cbee9aade00410c3754d9f89904.jpg

...and base run on 98 is 435kw on 22psi gate pressure. So far, so good.

20210803_102311.jpg

  • Like 6

Just pulled it up at 456kw at rears with 22psi at around 8200rpm on 98. We could make in excess of 500 on 98 with more boost and rpm but we thought why ?, Kill mode will be on E85. Time to start flex tuning it.

  • Like 4

Wait  . . . is that the Mission Impossible theme music I hear playing ?

And the credits now roll !

Congratulations that's a serious amount of mambo there !

Now you can just sit there and do nothing . . . . cause its finished  . . . . . right . . . . ? 

You'll have to take up another hobby now . . . like . . . stamp collecting or knitting ! 

Yep knitting ! I hear that's very therapeutic or cathartic ! !  

  

  • Haha 1
On 03/08/2021 at 9:54 PM, BK said:

E85, 32psi, 8000rpm limit. Crazy bastard wanted to go more boost as it still wants to keep making power :

2021_8_3_21_1_58.thumb.png.bc406de747dc46e0d3c8a20a66d3251e.png

.....Mission accomplished 🤟

Amazing!!!  Top stuff mate, that's gunna be one fun car to drive!!!

9000 rpm launch videos currently being uploaded?? 😁

On 04/08/2021 at 10:15 AM, Shoota_77 said:

Amazing!!!  Top stuff mate, that's gunna be one fun car to drive!!!

9000 rpm launch videos currently being uploaded?? 😁

I’ll be amazed if he woke up for the second car to be tuned, I would have been out all night driving it lol 

  • Like 1
On 04/08/2021 at 9:45 AM, Shoota_77 said:

Amazing!!!  Top stuff mate, that's gunna be one fun car to drive!!!

9000 rpm launch videos currently being uploaded?? 😁

Running it in the Red centre nats drags and motorkhana in 4 weeks, so yeah I'll have to try and get some footage.

On 04/08/2021 at 10:17 AM, r32-25t said:

I’ll be amazed if he woke up for the second car to be tuned, I would have been out all night driving it lol 

Nah 6:30 up and out. White 32 is on the dyno as we speak.

  • Like 2
On 04/08/2021 at 10:47 AM, r32-25t said:

I’ll be amazed if he woke up for the second car to be tuned, I would have been out all night driving it lol 

I'd be still driving it!  I've forgotten what driving a GTR even feels like!

 

  • Haha 2
On 04/08/2021 at 10:49 AM, r32-25t said:

Be interesting to see how different the two cars results end up 

Just come back from getting more E85, so I'm predicting maybe 500hp on 98 and 600hp on E85 ? Dunno, but if the Trust T78 sucks a Precision 6266 might have to replace it.

  • Like 1
On 04/08/2021 at 11:42 AM, BK said:

Just come back from getting more E85, so I'm predicting maybe 500hp on 98 and 600hp on E85 ? Dunno, but if the Trust T78 sucks a Precision 6266 might have to replace it.

Ignore the power but compare the curves. T78 vs a 6266 on a 2.6.

FB29178C-E0FE-4387-B7E6-92B7480EFC7B.jpeg

  • Like 1
On 04/08/2021 at 12:10 PM, Piggaz said:

Ignore the power but compare the curves. T78 vs a 6266 on a 2.6.

FB29178C-E0FE-4387-B7E6-92B7480EFC7B.jpeg

Good find Paul, that's about what I was thinking the improvement would be for spool.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...