Jump to content
SAU Community

Recommended Posts

G'day ppl could I get pointers on a full rebuild of anRB@% GTST Series II engine for 500 to 1000 hp. I'm after horsepower and reliability together I dont want to be breaking somthing all the time lol. How much roughly could the rebuild cost aswell rough figures of what other ppl have spent and the ideas aswell would be helpfull. Im also south of brissy qld so any shop recommendations would be greatfull to.

For a start go to the Forced Induction section and look at the RB25 turbo upgrade thread. You will see what people have done to their cars to get more power. Start at the end to avoid a load of outdated gear.

And there is a huge difference both in power and in money between 500 and 1000hp so have a think about how much power you really want.

  • Like 1

Estimate at $40k to get everything going reliably 

im guessing u will be paying a workshop as u if you knew what u were doing u wouldn’t be asking such a vague question 

LOL, reliability for what use?

Dyno queen

Street car

Track hack

Sprints

You need lots of cubes, lots of strong parts, and some boost.

What transmission and drivetrain you using, that stuff can start eating itself at 400hp, let alone being reliable at 500-1000hp, for "some" reliability I would budget around 60-80k, easy, maybe more.

Your also going to need a "spare stash of cash" for when your "reliable setup" breaks.

And it will.

  • Like 2
On 5/28/2020 at 4:53 PM, Ben C34 said:

What can you do? Cmon man, this thread is ultra vague!

Well at the moment mate I'm rebuilding a LS3 engine out of a senator from ground up and my skyline is my next project I was just seeing what other people thoughts were hoping there was people on here to throw out ideas I might not have thought of

On 5/28/2020 at 5:26 PM, mlr said:

LOL, reliability for what use?

Dyno queen

Street car

Track hack

Sprints

You need lots of cubes, lots of strong parts, and some boost.

What transmission and drivetrain you using, that stuff can start eating itself at 400hp, let alone being reliable at 500-1000hp, for "some" reliability I would budget around 60-80k, easy, maybe more.

Your also going to need a "spare stash of cash" for when your "reliable setup" breaks.

And it will.

Cheers bro I'm setting up for street n track I been researching and I'm just going to aim for 500hp I'm going to run a 6 speed manual transmission and I can apparently get a 9 inch diff made 

23 minutes ago, MrSINNER said:

Cheers bro I'm setting up for street n track I been researching and I'm just going to aim for 500hp I'm going to run a 6 speed manual transmission and I can apparently get a 9 inch diff made 

Nothing wrong with the RB diff.

50 minutes ago, KiwiRS4T said:

Nothing wrong with the RB diff.

Really mate I haven't really had much to do with the RB parts as a whole I been into more V8's but I am really loving the RB's. I have seen the limited slip upgrade for them is that the better way to go?

33 minutes ago, MrSINNER said:

Really mate I haven't really had much to do with the RB parts as a whole I been into more V8's but I am really loving the RB's. I have seen the limited slip upgrade for them is that the better way to go?

Kaaz 2-way into the centre and off you go :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...