Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 217
  • Created
  • Last Reply

Top Posters In This Topic

Mine arrived yesterday, damn quick considering I ordered lunch time Monday and I'm all the way in the west. Cheers, hopefully putting them in this weekend.

Just one thing though, in this thread:

http://www.skylinesaustralia.com/forums/topic/61606-stagea-parts-list/page__st__280

you mentioned 2 year warrenty, but on the box it says 6 months?

Mine arrived yesterday, damn quick considering I ordered lunch time Monday and I'm all the way in the west. Cheers, hopefully putting them in this weekend.

Just one thing though, in this thread:

http://www.skylinesaustralia.com/forums/topic/61606-stagea-parts-list/page__st__280

you mentioned 2 year warrenty, but on the box it says 6 months?

Im glad you received them ok and in good time.

The warranty is definitely 2 years. We are still running through our old packaging and the warranty used to be 6 months.

:cheers:

its a 2000 model so a series two im guessing? correct me if im worng?

Series 1 = $390.00 delivered

Series 2 = $410.00 delivered

:cheers:

its a 2000 model so a series two im guessing? correct me if im worng?

The 2000 model would be the R34 NEO engine so you would need part number YJ-RB2025-N.

What type of Skyline or engine do you have?

:cheers:

a rb25de, its a 2000 gt25

The 2000 model would be the R34 NEO engine so you would need part number YJ-RB2025-N.

What type of Skyline or engine do you have?

:cheers:

  • 2 weeks later...

Now in stock, YELLOW JACKETS COIL PACKS to suit S13/S14 SR20DET models (Part number: YJ-SR20-S1) - AU$340.00 delivered within 2-3 business days via express post.

- DIRECT REPLACEMENT FOR THE FOLLOWING SR20 MODELS:[/b]

SILVIA/200SX - PS13/KPS13 - SR20DET - (1991-1993)

SILVIA/200SX - S14/CS14 - SR20DET - (1993-1999)

180SX - RPS13/KRPS13 - SR20DET - (1991+)

:cheers:

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Payment cleared yesterday, sent yesterday, received today, can't describe how impressed I am with the turn-over time. Can't wait to install them tomorrow and will hopefully (fingers crossed) be writing very positive feedback sometime this week.

Cheers!!

Payment cleared yesterday, sent yesterday, received today, can't describe how impressed I am with the turn-over time. Can't wait to install them tomorrow and will hopefully (fingers crossed) be writing very positive feedback sometime this week.

Cheers!!

Excellent. Im glad you received them in good time. :cheers:

  • 5 weeks later...

I need R33 Series 1 coils can i make order here?confused.gif

You sure can. I just sent you a PM with all the details.

:cheers:




  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...