Jump to content
SAU Community

Recommended Posts

On 05/05/2021 at 6:53 AM, reaper said:

I think a 6870 could be a good match for a 2.8 with vcam and you'd probably be all in under 5. Keen to see someone try it though.

Nothing wrong wit a 6466, its a perfect street turbo imo just doesn't have the legs of the bigger cars.

doesnt one of the dahtone cars have setup? 2.8 + vcam + something 

21 hours ago, r32-25t said:

I was talking to the owner of the r32 gtr with the plates “billet” he has a 2.8 in a billet block making 1150hp at the wheels and regularly drives it on the street and has done 40 plus passes (best being a 9.0 at 160+mph) and he says it’s never been an issue and he drives it in stop/start traffic and the lot.
 

What he did say is he changes his oil pretty regularly and makes sure the oil is up to 80° before he drives it and apart from that it’s no different to having a cast block 

Yep the Malas brothers have had a good run with theirs and it does get driven.

They have also changed the oil as regularly as every 100km's in it and are pedantic about oil and water being up to temp before any kind of revs (which is a good thing) which I am sure does help.

That being said I have no intention of ever putting one in a street car :)

  • Like 1
1 hour ago, reaper said:

Yep the Malas brothers have had a good run with theirs and it does get driven.

They have also changed the oil as regularly as every 100km's in it and are pedantic about oil and water being up to temp before any kind of revs (which is a good thing) which I am sure does help.

That being said I have no intention of ever putting one in a street car :)

Maybe a minimum oil change interval specification is required for a car to be called a "street car"

7 hours ago, reaper said:

Yep the Malas brothers have had a good run with theirs and it does get driven.

They have also changed the oil as regularly as every 100km's in it and are pedantic about oil and water being up to temp before any kind of revs (which is a good thing) which I am sure does help.

That being said I have no intention of ever putting one in a street car :)

Not exactly feasible to warm up the car for 10 min in order to pop around to the shops or the gym

31 minutes ago, r32-25t said:

who uses a gtr to pop to the shops? If Im going to bother to get the gtr out I’m going for a good drive 

was going to ay the same thing lol who could be bothered dragging a GTR out of the garage to go get milk lol

On 09/06/2021 at 9:05 PM, ido09s said:

was going to ay the same thing lol who could be bothered dragging a GTR out of the garage to go get milk lol

I used to take mine to the gym all the time, then out for a coffee at the local shops.

Will definitely be doing it again when it's back on the road

Not just sitting there idling though, quicker you get to operation temp the better under light load. It'll take a lot more than 10 minutes idling to get to 80 oil temp, even at 40+ ambient unless your cooling system sucks.

Mine comes out of the garage and runs till i know the door is down then its off down the road. Maybe 3 minutes and i am out of there. The engine is 17 years old now and still going strong. We have a GReddy sandwich plate with thermostat so it gets temp into it quick, but i cant be bothered warming it up. Just drive it sensibly and it will be fine

  • Like 2
22 hours ago, BK said:

Not just sitting there idling though, quicker you get to operation temp the better under light load. It'll take a lot more than 10 minutes idling to get to 80 oil temp, even at 40+ ambient unless your cooling system sucks.

 

This.

 

Can't stand it when people sit there idling their cars for 10+ minutes, it's doing more harm than good. Never seen a GT3/V8 Supercar/Pro time attack car etc sit idling for 10 minutes, you fire it up and get moving. 

  • Like 1
12 hours ago, Unzipped Composites said:

 

This.

 

Can't stand it when people sit there idling their cars for 10+ minutes, it's doing more harm than good. Never seen a GT3/V8 Supercar/Pro time attack car etc sit idling for 10 minutes, you fire it up and get moving. 

yup 100 percent mate. i live in an area where it gets extremely cold even minus 50 celcius sometimes. even then if the block heater was plugged in you only wait a couple minutes(or high idle it and thats better) then slowly warm it up driving keeping rpms lowish. warms everything else up slowly too transmission diff etc.  im sure most of you mates see how long it takes oil temps to rise in a gtr so just imagine your rb sitting there tryng to reach oil temps at idle? would take for ever and does a number on your rings especially older motors that arent perfect anymore. my gtr always smoked out the exhaust a bit until i got her warmed up so i never let it idle longer than 1 minute(and this wasnt the turbo as was a brand new precision).  get the rings and pistons hot soon as possible your engine will thank you.  that sitting idling crap is for the birds. 

  • Like 2
  • 2 weeks later...
On 01/05/2021 at 10:21 AM, BK said:

You tune with JEM right ? What did they say ?

Back onto the topic of billet turbos instead of billet blocks

i was at a dyno day at jem early this month and decided to ask Adam about the 6870 2.8 combo while I was there, he said it should make 650kw at the wheels and be all in at 4500

  • Like 1
1 hour ago, r32-25t said:

Back onto the topic of billet turbos instead of billet blocks

i was at a dyno day at jem early this month and decided to ask Adam about the 6870 2.8 combo while I was there, he said it should make 650kw at the wheels and be all in at 4500

I think he's dreaming....

Have a look another look at Reapers graph that you posted? 

A large static cam 2.8 will do better than a 3.2L V cam? 🤔

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...