Jump to content
SAU Community

Recommended Posts

servicing the rs4s and gonna change all the transfercase/ diff fluids.

will be interesting to see if there is a noticable change in driving.

i have heard that people get allot more movement from the torque split guage once doing so.

any recomendations on which diff/ transfer fluids to use? (i assume there going to be the same anyway?)

servicing the rs4s and gonna change all the transfercase/ diff fluids.

will be interesting to see if there is a noticable change in driving.

i have heard that people get allot more movement from the torque split guage once doing so.

any recomendations on which diff/ transfer fluids to use? (i assume there going to be the same anyway?)

No transfer is a good synthetic atf diffs depend on whether you have a mechanical LSD or the viscous one.

Clutch was slipping stressed as it's on 20k old, seems id adjusted it to much on the Slave and through ware it's got to its limit, re adjusted now it's chearpin again :). Also installed a knightrider light! Wanted it since I was 6, lost the remote couldn't turn it off, drove to the shops! Kids pointed and laughed! It would havd been cool in 86 :P

I've painted the grill matt black too but wouldn't get rid of the chrome strip as it will make the car look more dumpy if you know what I mean...

Ive just painted the corner strips, yet to do the doors. If i dont like them, could i strip the paint back with some turps or metho without damaging the factory paint?

Clutch was slipping stressed as it's on 20k old, seems id adjusted it to much on the Slave and through ware it's got to its limit, re adjusted now it's chearpin again :). Also installed a knightrider light! Wanted it since I was 6, lost the remote couldn't turn it off, drove to the shops! Kids pointed and laughed! It would havd been cool in 86 :P

wheres the pics?..lol

cheers

darren

I have 595rsrs on mine mate, they are awesome! I can mash the throttle around a corner and I just get a touch of power oversteer before they hookup on 235/35/18s. With over 300kw atw :)

Did you do the white lettering yourself?

Edited by stageaharts

repaired passenger side electric window switch, was a bit of fiddling with the internals of the switch but got it going again

also adjusted both front windows so they tuck into the slot to hold them in so water doesn't come in, was actually nice and a lot more quite inside the car :)

pads front and rear and put on some d1r's 17x8 +25. pretty much a perfect fit for a daily! need to lower the rear 20mm though. I never bothered re-blacking the bumper trim because i am going to spray them all in kr4. Do you guys reckon i could just rub back the sides and front or will the stuff wreck/seep through under the paint? It's been for roughly 4ish months.

Also Snatch the kitteh

post-108100-0-77013800-1393841268_thumb.jpg

post-108100-0-12384600-1393841367_thumb.jpg

Edited by Stagea97

I've run semis on my other cars but can't justify them yet on the stag ! Cornering is all good with my suspension setup and just the atr's on. traction off the line at the moment with the full race ets pro standalone unit taking over from altessa computer is a lot better, 6k launch slight w/spin and bam out of there:) 10s with 265 on the rear help too see how it goes with the next touch up tune should game a chunk more under the curve !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...