Jump to content
SAU Community

Recommended Posts

Atm, me and 4bidn1 have removed hypergear G3 and sent if of to get new design rear turbine wheel, replaced 044/surge tank setup

with intank 460 walbro, shifted Z32 into cooler pipe in a 3 inch alloy tube, and changing water injection system to a air/water atomiser setup

with no pump.

and looks wise have fitted a vented carbon fibre bonnet, just need ganadors now to finish it off..

cheers

darren

Finally took a pick with the Akebono's on. Nice to fill out those rims :)

IMAG03551_zpse1a2a569.jpg

Getting there slowly, bit by bit. Need the other front bar & spoiler fixed & modified next I think, then back to under the bonnet stuff

  • Like 1

Finally took a pick with the Akebono's on. Nice to fill out those rims :)

IMAG03551_zpse1a2a569.jpg

Getting there slowly, bit by bit. Need the other front bar & spoiler fixed & modified next I think, then back to under the bonnet stuff

Looks great Cam; what are your underbonnet plans with this one?

Looks great Cam; what are your underbonnet plans with this one?

Needs the other front bar back on first, this one is the aero-less spare that I modified in my non-pro plasti-welding fashion :unsure:

Planning to chuck on some headers and my decat pipes... but I plan to install hydrogen injection prior to that for a number of reasons, one of which is a reduction in emissions/smell due to a lack of cats.

Still have quite a list of planned changes after those (quite a list actually) so will see how we go...

Edited by iamhe77

Atm, me and 4bidn1 have removed hypergear G3 and sent if of to get new design rear turbine wheel, replaced 044/surge tank setup

with intank 460 walbro, shifted Z32 into cooler pipe in a 3 inch alloy tube, and changing water injection system to a air/water atomiser setup

with no pump.

and looks wise have fitted a vented carbon fibre bonnet, just need ganadors now to finish it off..

cheers

darren

Your new turbo ;) :

comp.JPG

Did 80k service + fitted my de-cat/ed dump pipe. Pretty surprised at how much better it goes, can only imagine how good it would be with a proper aftermarket one.

Now have to install wideband O2 to the front pipe, then it's ready for tuning

  • Like 1
  • 2 weeks later...

Oi I did ask you and you said they were ok!!! :whistling:

Why can't Cihan print out dyno sheets...LOL

Also, everyone thought I had an air leak somewhere...cos there's a pretty loud hissing noise when it hit boost.

Edited by ironpaw

Why can't Cihan print out dyno sheets...LOL

Also, everyone thought I had an air leak somewhere...cos there's a pretty loud hissing noise when it hit boost.

Cihan can print dyno sheets, when the printer has paper. :P

It's not hard to check for boost leaks, unless you want it done remotely... Drop down mate.

Finally got my gas struts regassed today; no more getting belted in the back of the head when I throw backpackers in the boot.

Guess I'll have to get a bat or something to knock them out now.

  • Like 1

Traded mine in yesterday....

Sad to see it go after 5 years good service, but a 09MY 370GT sedan is helping...

Been a great few days in Melbourne for a 245kW rwd car... :-) missing the AWD already..

Traded mine in yesterday....

Sad to see it go after 5 years good service, but a 09MY 370GT sedan is helping...

Been a great few days in Melbourne for a 245kW rwd car... :-) missing the AWD already..

Nice!

Can you get the sedan in a manuel, or are they all auto?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...