Jump to content
SAU Community

Recommended Posts

I also know nothing about plumbing, so I can't say whether age and deafness are going to cause a serious concern to being able to get the job done.

I wouldn't have thought so, but I have no idea on what plumbers must go though on a daily basis.

Do feel free to ring them and ask, cos frankly I don't know what my boss thinks of me.

Frankly if you were going beyond expectations you would know what your boss thinks as he would have told you. If you don't know, you are just one of the many scraping by.

  • Like 1

I think your view is bullshit.

Sounds like you thought the volunteer job was a given and you probably conveyed that 'done deal' attitude. Sometimes how a person fits is more important than $ if you are representing an image/brand/identity.

You have two eyes, hands & a connection to the internet. People have made it much further with much less. Imagine if you were born in your parents generation with no internets.

And if your only driver for a start-up is profit, then you will fail. The point is to offer a service or product unique to you. If there was minimal risk it would have been over-done already.

Thanks for the honesty.

I'm not looking at starting a courier business - too much needed to invest with minimal return over years (I've asked around). I'm looking at electrical appliance testing and tagging actually, I've got the certificate, equipment will cost me maybe 5 grand to start it up, then I need a car, ABN/ACN fees, set up invoicing, insurance for car, public liability, indemnity (4-6k p.a. depending on who you go with), and that's 10-15k if done cheaply and I haven't factored in fuel, potential taxes, potential consultation etc. Based on prices from competitors, I've worked it out the end profit may end up at 10k p.a. So that isn't much.

About the volunteering, at the start of discussion, the lady did say she needed people and we worked it out what we can do and in the end she just changed her mind that instant. Anyone else just wasn't interested (at least they were honest about that), had to drop that course out cos it require a placement with 100 hours of volunteer/paid work.

She did admit that it won't cost that organisation anything with the position we talked about and didn't tell me why she changed her mind THAT SOON without any form of explanation that peeved me off.

So from what I'm reading your and others comments I have shit attitude of life in general, ok, I accept that. Can I change it, let's find out shall we?

I also know nothing about plumbing, so I can't say whether age and deafness are going to cause a serious concern to being able to get the job done.

I wouldn't have thought so, but I have no idea on what plumbers must go though on a daily basis.

Their excuse was 'inability to communicate' 'can't diagnose faults'

Bullshit, I learned that in TAFE and I passed with flying colours.

EDIT: missed the age bit.

I was 24/25 when I applied around for the second time, simply put, business doesn't want to pay mature age wages. Businesses always want to spend low as possible and get maximum profit.

Example, they don't mind paying more for one fully qualified knowing they know all rather than paying mid range money for someone who doesn't know all and that can be done with paying 16 year old bugger all for the same thing.

Whoever doesn't mind paying that much is usually family/friends from what I've been finding out during when I applied around.

Frankly if you were going beyond expectations you would know what your boss thinks as he would have told you. If you don't know, you are just one of the many scraping by.

Fair enough.

Would you prefer automotive work or electrical work?

Maybe local/small business might be interested in part time to learn skills with the possibility of full-time?

Electrical work is what I'd prefer.

Suppose I could give it a shot.

Thanks for the honesty.

I'm not looking at starting a courier business - too much needed to invest with minimal return over years (I've asked around). I'm looking at electrical appliance testing and tagging actually, I've got the certificate, equipment will cost me maybe 5 grand to start it up, then I need a car, ABN/ACN fees, set up invoicing, insurance for car, public liability, indemnity (4-6k p.a. depending on who you go with), and that's 10-15k if done cheaply and I haven't factored in fuel, potential taxes, potential consultation etc. Based on prices from competitors, I've worked it out the end profit may end up at 10k p.a. So that isn't much.

About the volunteering, at the start of discussion, the lady did say she needed people and we worked it out what we can do and in the end she just changed her mind that instant. Anyone else just wasn't interested (at least they were honest about that), had to drop that course out cos it require a placement with 100 hours of volunteer/paid work.

She did admit that it won't cost that organisation anything with the position we talked about and didn't tell me why she changed her mind THAT SOON without any form of explanation that peeved me off.

So from what I'm reading your and others comments I have shit attitude of life in general, ok, I accept that. Can I change it, let's find out shall we?

To be quite honest; a plumber & test/tag position is not a career, it is a job. It is a job which can pay well enough to deal with the shit.

Find a career path which you will enjoy, stop thinking about $ as you will never be happy especially when you are competing against people without a disability.

Find something which defines you & your intellect/passion.

My friend has a condition & cannot read/write however he is loyal & can think for himself. He took his gym passion along with his loyalty & is now a heavy equipment workshop assistant. He is now showing the ropes to an apprentice & you cant wipe the smile off his face.

If there is a will you will find a way. Stop following the herd into plumber, electrical jobs & start to think about how you can make a difference, what gives you an advantage over the rest.

To be quite honest; a plumber & test/tag position is not a career, it is a job. It is a job which can pay well enough to deal with the shit.

Find a career path which you will enjoy, stop thinking about $ as you will never be happy especially when you are competing against people without a disability.

Find something which defines you & your intellect/passion.

My friend has a condition & cannot read/write however he is loyal & can think for himself. He took his gym passion along with his loyalty & is now a heavy equipment workshop assistant. He is now showing the ropes to an apprentice & you cant wipe the smile off his face.

If there is a will you will find a way. Stop following the herd into plumber, electrical jobs & start to think about how you can make a difference, what gives you an advantage over the rest.

The reason I wanted to be a Plumber is I find that job interesting, thats all, when I did pre-apprenticeship course, I LOVED every minute of it, I LOVED what I've learnt, in fact, it was the best course I'd done. It might sound strange to you but that's me, unfortunately no one is willing to take me on as an apprentice and obviously I'm both disappointed and angry about it.

Nothing else interest me at all, yes, this is a huge issue if I want to change career path. So does it mean I have to ditch the word 'career' in my mind and go for something pointless and spend/borrow from Australia Government to pay for course that I don't even want to do?

At the moment, I guess I'm too busy whinge about how well my 'career' goes to even give it a proper thought, therefore I'm a shit person.

You probably didn't get the volunteer position because your horrible attitude seeps into everything you do, probably you can't see it but I can just from your posts I wouldn't give you a go either

People want someone who is hungry or enthusiastic not a 'my life sucks' poor me attitude

one thing I know for certain the harder I work the luckier I get

  • Like 1

You probably didn't get the volunteer position because your horrible attitude seeps into everything you do, probably you can't see it but I can just from your posts I wouldn't give you a go either

People want someone who is hungry or enthusiastic not a 'my life sucks' poor me attitude

one thing I know for certain the harder I work the luckier I get

Alright.

So volunteer thing is now a no-go.

Now to find something else.

And I thank you for your honesty.

have you considered instrumentation? its next one up from test & tag. calibration of meters and equipment.

one hazard i can think of with electrical is obviously working in a hazardous environment. however calibration etc is mostly done in labs and controlled environments. some roles dont need electronics experience (some do) but its a goal from a test & tag background and most of the time you dont need to be an A-grade qualified electrician to do it.

have you considered instrumentation? its next one up from test & tag. calibration of meters and equipment.

one hazard i can think of with electrical is obviously working in a hazardous environment. however calibration etc is mostly done in labs and controlled environments. some roles dont need electronics experience (some do) but its a goal from a test & tag background and most of the time you dont need to be an A-grade qualified electrician to do it.

Honestly, I don't think there's much work available in that field for me to even consider taking it up.

I shall see if it's the case.

Meanwhile in America

Dodge Challenger Hellcat

527kw, 880nm

From factory will run the quarter in less than 11 seconds

$60k USD

So glad there's a nation out there continuing to produce something like this, while the rest of the world pussies out of fking the environment

  • Like 1

Meanwhile in America

Dodge Challenger Hellcat

527kw, 880nm

From factory will run the quarter in less than 11 seconds

$60k USD

So glad there's a nation out there continuing to produce something like this, while the rest of the world pussies out of fking the environment

Only 60 large?

Fark.

Meanwhile in America

Dodge Challenger Hellcat

527kw, 880nm

From factory will run the quarter in less than 11 seconds

$60k USD

So glad there's a nation out there continuing to produce something like this, while the rest of the world pussies out of fking the environment

let's go halves

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...