Jump to content
SAU Community

Recommended Posts

There is a setting for metric in there. Use that and everything changes.

Hi Chris

I read somewhere in a Canadian forum that the setting in the US cluster preferences changes all to kph except the actual odometer. This continues to show miles (and I assume count up in miles). Is this true? e.g. I get we can flash eprom to make the odometer show current car kms but if it continues to count up in miles it will quickly become inaccurate.

Also a lesser but annoying item with US cluster is that kph is the inside ring and the outside larger lettering shows mph. I have not found anybody selling a new facia but this guy could be asked.

http://www.blackcatcustom.ca/infiniti_g35.htm

Edited by mybrains

Thanks guys, yes CDN seems the go. In my hunt I see both Nav and non Nav versions of the speedos. Whats the difference? I would have thought the cluster didnt have anything to display nav wise (but maybe it has something to do with providing the nav system with driving info?

I have a Nav car, but am currently seeing a non Nav CDN speedo. I wonder if it will work (or can be modded to work - maybe by transferring something from my existing JDM cluster?)

I'm quite interested in changing over my dash cluster screen to display in English too, but is there any reason we can't just change the actual screen components within our jap clusters???

Or are people just changing the whole cluster because it's near on impossible to find just the actual screen itself without buying a whole cluster?

BurtoN86,

inside is pretty integrated (screen to main PCB and externally to ECU) and I doubt the lcd swap alone would work but hell, give it a go and report back.

Also the facia on JDM models only goes to 180kph whereas Canadian goes to 260kph so a facia swap wont work by itself either. Its just much easier to swap the unit whole and be done.

I scored a Canadian FX35 08 cluster a will attempt to use it in a 2010 EX35... physically looks the same but no idea if it will swap. If not, anybody with a FX can contact me for a Eng 260kph speedo :)

Edited by mybrains

BurtoN86,

inside is pretty integrated (screen to main PCB and externally to ECU) and I doubt the lcd swap alone would work but hell, give it a go and report back.

Also the facia on JDM models only goes to 180kph whereas Canadian goes to 260kph so a facia swap wont work by itself either. Its just much easier to swap the unit whole and be done.

I scored a Canadian FX35 08 cluster a will attempt to use it in a 2010 EX35... physically looks the same but no idea if it will swap. If not, anybody with a FX can contact me for a Eng 260kph speedo :)

Dont think the FX series were ever sold in japan under the Nissan badge thus none out there with 180km/h cluster either imo...

  • 4 weeks later...
  • 1 month later...

Ah, you're missing out on the most fun thing: learning to give voice commands in Japanese. Stinking hot day and saying "Air con ju-hachi do" gets a few laughs from the passengers. :P

I tried this today and had a good giggle. Got any more commands I can try? :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
×
×
  • Create New...