Jump to content
SAU Community

Recommended Posts

52 minutes ago, emts said:

I think your overestimating a stock cars speed.. and under estimating it's reliability

 

Whilst a STI is very quick on a road a stock one on the track just does not have the tyres/suspension to be corning hard enough to really carry enough speed to cause a problem.

plenty of people run STI's on the track and they have no probs car mags run them all the time.

your just  going to do a few 200 -> 60 slow downs, and a set of brembos will handle it fine.

your not going to be pulling low 20's or anything.

monitor your temps adjust your tyre pressure during the day (I assume STI have TPS as the stock imprezza does) and you will be fine,

Sandown is normally 5 lap sessions I would be doing 2 hot 1 cool down and then 2 hot to finish (you then get a cool down coming into the pits)

couple laps of the pits and don't put the handbrake on in the pit.

you are going to have lots of fun.

That's exactly what I thought, the magazines hammer them all day without issues.

I'll keep you all posted anyway with what happens :D

I'm expecting pads to basically be gone and tyres go mooshy after a while. 

The car has giant front calipers it will be fine.

And also got that fluro green radiator ducting so extra cooling.
Will be fine. Maybe bring a hand held temperature gun to measure radiator temp/block temp after session.

  • Like 1

Contribution from my limited experience:

Brake early into turn one on your first flying lap to get a feel for it; people seem to underestimate how cooked their brakes can be coming onto the main straight. That huge kitty litter patch is there with good reason.

Flashbacks to Simons car going through kitty litter and ripping his FMIC apart ? 

Making me wanna just do motorcycle track days again, much cheaper :)

Edited by UNR33L
11 minutes ago, UNR33L said:

Flashbacks to Simons car going through kitty litter and ripping his FMIC apart ? 

Making me wanna just do motorcycle track days again, much cheaper :)

if your intercooler is hitting the kitty litter in a WRX/STI you have bigger problems.

 

so flash back to my first ever track day 

was with WRX club and was meant to be driver training, however I was only entrant so they just dumped me in with regular told me I was in a group with similar speed and just follow them. Note my car was very stock at time

 

first hot lap I was following a wrx to turn one saw his brake point so I hit it 50 meters earlier just to be careful...cue flying straight past corner and into kittly litter..one I finally slowed enough to know was not going hit wall look at mirror to see a MX5 flying backwards into the kitty litter right at me, so powered on out. no damage lucky.

 

went and tracked the WRX in the pits later, semi slicks, Big brake conversion and fully stripped out....damn it.

 

 

21 minutes ago, blah_blah said:

Anyone going to this?

If so come by and say hello ill be competing in Quake

 

 

Thought about it, I wouldn't mind running in the open forza competition with the v8sc

Not much else really takes my interest though

Edited by UNR33L
19 minutes ago, emts said:

if your intercooler is hitting the kitty litter in a WRX/STI you have bigger problems.

 

so flash back to my first ever track day 

was with WRX club and was meant to be driver training, however I was only entrant so they just dumped me in with regular told me I was in a group with similar speed and just follow them. Note my car was very stock at time

 

first hot lap I was following a wrx to turn one saw his brake point so I hit it 50 meters earlier just to be careful...cue flying straight past corner and into kittly litter..one I finally slowed enough to know was not going hit wall look at mirror to see a MX5 flying backwards into the kitty litter right at me, so powered on out. no damage lucky.

 

went and tracked the WRX in the pits later, semi slicks, Big brake conversion and fully stripped out....damn it.

 

 

 I think last track day I did in a car was 8 years ago Winton in my 33 gtr 

The centre caps on my wheels were plastic and melted off :(

What recording app do you use on phones?  I heard Racechrono is good? 

Edited by UNR33L
52 minutes ago, blah_blah said:

Ayyyy ill be there Saturday

I'll try and make it down, just saw there'll be 5v5 CS:GO in the main arena which should be good

I'm guessing the place is gonna be packed

Edited by UNR33L
2 hours ago, emts said:

racechrono on android with a external 10Hz GPS receiver.

 

+1 for this.

That said, have used WITHOUT gps receiver, still gets pretty good/usable/awesome data. Would try it on its own first nowadays with updated/modern phones.

6 hours ago, emts said:

if your intercooler is hitting the kitty litter in a WRX/STI you have bigger problems.

Yep.

First proper track day I did was Rexmas at Sandown.

Didn't kill brakes and tyres that day and it was only allowed to push it at 80% that day. But Platts managed to blew TMIC Y pipe and boost went from 18 to 25psi on 205 block...

1 hour ago, Count Grantleyish said:

Yep.

First proper track day I did was Rexmas at Sandown.

Didn't kill brakes and tyres that day and it was only allowed to push it at 80% that day. But Platts managed to blew TMIC Y pipe and boost went from 18 to 25psi on 205 block...

RIP

The more I read about the EJ the more I cringe 

I mean the Focus RS was the other option ? 

But the rumble is good!

Edited by UNR33L

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...