Jump to content
SAU Community

Recommended Posts

Hi guys i know this is probably pushing it but i have to ask

Is there such a thing as a quiet 3 inch exhaust for a R33 GTS~t.

If so does anybody have Db test something close .

other wise i may have to do a stealth system like pic....

Good quality round centre muffler and oval rear muffler can be within legal limits.

my 3" inch system is legal, quiet and not restrictive.

3.5" dump, 3" 100cel cat, 2x 3" straight-through mufflers, dump tip. All stainless, all magnaflow.

not a skyline, but turbo cars are generally same-same.

At 100km/h the engine/turbo noise and general tyre/road noise kills any quiet time you might get anyway!!! Well it does in mine. If I want to drive and listen to music the volume knob gets a work out!!!

  • Like 1

Once you get 2x mufflers & a resonator to remove the "bark" from the exhaust it's pretty quiet.... the tyre/road noise is the loudest thing in my car at cruise.

On the loud pedal there's "some" noise but you can still hold a full conversation without raising your voice.

if yr interested, my super super quiet 3" exhaust from my 33 GTR will be coming off soon (i'm actually annoyed that it is too quiet and going to a 3.5" varex).

i think they are interchangable with gtst's..... if so you could buy that one from me :)

Edited by usmair

Yep

I run a 3.5" system and I can tell you it's quieter than 90% of the skylines out there....

3.5" dump -> 3.5" cat -> 3.5" mid muffler -> 3.5" resonator -> 3.5" muffler

What brand of mufflers you using?, got any part numbers?

Id like to build a 3.5 inch exhaust, but my mates ones are super drony even with 2 big mufflers and a lot of 3.5 inch mufflers are only 3 inch internally so im sorta put off atm

was just going to go 3.5 inch to just before diff and go back to 3 inch and use muffflers i have used before that dont drone like crazy

cheers

darren

Edited by jet_r31

What brand of mufflers you using?, got any part numbers?

Id like to build a 3.5 inch exhaust, but my mates ones are super drony even with 2 big mufflers and a lot of 3.5 inch mufflers are only 3 inch internally so im sorta put off atm

was just going to go 3.5 inch to just before diff and go back to 3 inch and use muffflers i have used before that dont drone like crazy

cheers

darren

the mid muffler is a basic hurricane round 3.5" muffler, the resonator has been cut off same cat back (HKS Priest) and the sides trimmed till the pipe work became 3.5" the rear muffler is a massive HKS Priest muffler which isn't really 3.5" more like 3.25" but good enough.

Funny enough, when the gate cracks the exhaust gets even quieter.. (it's plumbed back after the cat) like so (old pic, all the shit is wrapped up and also the wiring has been cleaned up):

post-22311-0-54027400-1463922888.jpg

  • Like 1

My soarer is loud as f**k with its 3.5" system

Has a big hooker aerochamber at the back and a custom mid muffler (its small cause f**k all room with a 3.5" pipe)

What mufflers are you guys using on the quieter systems?

My soarer is loud as f**k with its 3.5" system

Has a big hooker aerochamber at the back and a custom mid muffler (its small cause f**k all room with a 3.5" pipe)

What mufflers are you guys using on the quieter systems?

i thought the hooker was one of those mufflers that is actually 3 inch internally aswell, only has 3.5 outers

cheers

darren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...