Jump to content
SAU Community

Recommended Posts

Hey guys,

 

I just found this thread as I haven't been very active on SAU lately.  I'm seeking some opinions and wanted to start a discussion as this relates to GTR pricing.

 

I got defected a few months ago for having an exhaust that was too loud.  My fault entirely - I knew it and was pretty much on borrowed time, but chose to run the risk anyway as it was pretty much a weekend car (if that).  Long story short, I'll need to go through a full regency inspection to clear the defect.  This is where my troubles begin.

 

 My car is quite heavily modified:

 

RB26/30

Forged Internals

Unknown cams

Trust 100mm Drag Intercooler

Vipec V44

1400cc Injectors

2 x E85 460Lph fuel pumps

O/S Giken 5 speed

O/S Giken triple plate

Vcam - http://www.sau.com.au/forums/topic/448677-new-rb26-vcam-in-let-setup-3000/

HKS GT2530's

Tomei dumps

R34GTR exhaust manifolds, port matched to turbos

Unknown aftermarket 2x70mm into 80mm to meet up with the old AM Performance 4" exhaust

Running on ~ 70% Ethanol content it achieved the attached figures.

 

My dilemna is whether I clear the defect (looking at least $5K for labour to return to stock and then back again) and keep driving it around hoping I'll get my money back later on?  Or should I just bite the bullet and sell it now and not spend any further money on it?  I'd probably be looking at overseas markets - that way I don't have to worry about the defect. 

 

My car is a 1990 Gunmetal grey with ~120k kms on the chassis and the new engine barely run in.  It's in pretty decent overall condition but is not a garage queen.

 

Would appreciate your opinions guys.  I have a daily so am happy to keep this car off the road for a while.

 

Cheers

20161111 - GTR Dyno.jpg

Sorry to hear mate, have you considered buying a complete stock motor? Could probably pick one up for 3k. Do engine swap, clear defect, then swap back.
Your build is almost a mirror build of my car.
Also how much are they going to check, will they go right through the whole car or just check the exhaust is compliant?

That's one option I'd explored already.  There's a place in SA called Sinergy Motorsports that specialise in clearing defects and they're happy to source the motor and do the swap for me.  I'm mechanically retarded, so would rely on a workshop to do the work.  It would cost at least $5K to do all up.  I'll keep an eye out for complete stock motors and see what turns up as this could make things a bit cheaper to do.

 

Unfortunately the defect requires going through Regency inspection, which is a full inspection of the car.  I guess it could be luck of the draw on the day.

 

I guess I've had the car for over 10 years and I thought this might be a sign to finally move on from the car, but I'm not too up to date in terms of market pricing and what I should realistically be doing from a financial standpoint.

 

Thanks for the feedback.  Let's keep the discussion going!

How much do the inspections cost? Why not have a shot at it with a quiet exhaust and changing over the other obvious things they'll pick up on? The turbos and engine itself shouldn't be picked up (assuming you haven't notified them of the different engine number, perhaps say it needed replacing and you hadn't updated it yet). As long as you swap around intake and exhaust you might get lucky on the rest? Worth it if it's a couple hundred to test...

generally in SA i have found if you have made a proper effort they will check the basics and ID and move on. 

if you have tried dodging around the rules and taking the piss with things then they will keep going further.

i.e. when people used to tac weld coilovers so they were "no longer adjustable" or jamming steel wool up huge exhausts the muffle the noise level to move around the laws then they would just hit you hard elsewhere.

but if your cars clean, not too loud, normal parts and well maintained and that you have made a reasonable effort with their prev concerns, then generally they will just make sure the basics are in order. that being said it does depend on the person at the time like all law enforcement situations.

Thanks for the feedback guys.  I think I might do the basics and try once to see what happens.

 

OK, given that this thread is about GTR prices, I'll try and put this back on topic a bit.

 

What would you do if you were me:

 

1)  Worst case spend say around $7K returning to stock and clearing the defect, then maybe keep the car for a bit and or sell

2)  Bite the bullet now and sell it off overseas as is, saving myself the time and money of clearing the defect.  Are overseas buyers interested in heavily modified cars?  Can they get them registered easily?  

 

Cheers

overseas buyers buy them clean from japan. they wont be interested in AUS stuff usually.

take it to Josh at Forge performance. have a frank chat to him about what you want to do and he will give you a good idea on what can be done at a decent budget and get it registered all smick as is.

then you can sell it in aus much easier and for a good dollar.

 i would personally be staying away from synergy.

On 18/09/2017 at 7:07 PM, mxfly said:

 


Price of that blue nur has gone up and down like a yoyo. Was initially 188k. Would've been sold if it was a solid car. The other blue nur with white te37 from Carlingford, Syd sold reasonably quick. The asking was 200k.

 

You were right, the yoyo is going back up now. Price back to 215 after some new photos.

Check this out - prices have further skyrocketed ....  this guy believes so :4_joy::4_joy:

https://www.gumtree.com.au/s-ad/leederville/cars-vans-utes/1996-nissan-skyline-r33-gtr-v-spec-ii-silver/1161617390

What do you say.....lol

     

Edited by IMACUL8
12 hours ago, IMACUL8 said:

Check this out - prices have further skyrocketed ....  this guy believes so :4_joy::4_joy:

https://www.gumtree.com.au/s-ad/leederville/cars-vans-utes/1996-nissan-skyline-r33-gtr-v-spec-ii-silver/1161617390

What do you say.....lol

Under specifications:

Body Type: 4D Sedan
Country of Origin: Australia
Release date: 1/09/1986

?? maybe they put personal info there instead of car info lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...