Jump to content
SAU Community

Recommended Posts

Great job mate. Easy isn't it!Best kept secret, can't believe nobody gave it a ago before me.

Slippy, it is the 350z that needs a bit of extension.

Put the extended 350Z mid-pipe in (has been passed around a few cars on this forum I think...) yesterday. As mentioned, bit more note, bit more performance. The thing I noticed was smoother throughout the rev range. I had a bit of a flat spot that's gone now.

Dead-easy fit, bolt straight in!

EXCEPT... Nuts on the front flange were rusted solid... Rounded off nicely with the right sized ring spanner... Angle-grinder to get them off, then the studs wouldn't come out so had to drill them out. 20 minute job took all afternoon! Still, happy with the results - CHEAP and easy upgrade. Keeps the minister for domestic affairs happy too!

Put the extended 350Z mid-pipe in (has been passed around a few cars on this forum I think...) yesterday. As mentioned, bit more note, bit more performance. The thing I noticed was smoother throughout the rev range. I had a bit of a flat spot that's gone now.

Dead-easy fit, bolt straight in!

EXCEPT... Nuts on the front flange were rusted solid... Rounded off nicely with the right sized ring spanner... Angle-grinder to get them off, then the studs wouldn't come out so had to drill them out. 20 minute job took all afternoon! Still, happy with the results - CHEAP and easy upgrade. Keeps the minister for domestic affairs happy too!

That my old one is it? Good to see its back in NSW!

My air con hasn't been working, which is somewhat understandable with some of the high temps we've seen lately in Adelaide.

I figured it might have something to do with the thermo fan, which hasn't worked since I put it in. I have never seen it spin.

Hooked the multimeter up, and only measured a negligible voltage. I cut off the dodgy solder connection, and put new crimp connectors on. Tested with a 9V battery, and the fan span up and ran fine.

So the problem must be the signal to the fan - the car just isn't switching it on. Is there a fuse I should be looking for, or is the car just deciding it doesn't need to kick this fan in?

I seem to remember this fan also sitting in front of the air con condenser, so thought this could be responsible for the crap air con.

Any ideas?

got stuck in stop/start traffic on the way home, and got bored so started playing with my fc commander. Good thing, because I noticed the coolant temp was higher than it should be (102deg) , and creeping higher.

So I managed to get it to my mech's workshop (was on my way there anyway), and discovered that I had melted the fuse for my thermo fan. Lucky Lucky Lucky I caught it in time: coolant reached a max of 115deg before shutdown....

I'm now looking at other options: breaker instead of fuse on thermo, or like I orinally wanted: twin thermos on independent circuits: I'm all about redundancy... Opinions?

Finally fitted my full exhaust on my M35 replacing the old, tired Kakimoto R cat-back

Fitted the AM Performance dump and mid-pipe along with a brand new SS Kakimoto R cat-back

Impressions..

Much deeper sound, revs so much more freely and quicker up the ranges.

Spools alot louder and harder. Just sounds so much better

Very impressed over all. Spent over $2K all up and had to wait 2 months but I'm happy..

Highly recommend all items.

got stuck in stop/start traffic on the way home, and got bored so started playing with my fc commander. Good thing, because I noticed the coolant temp was higher than it should be (102deg) , and creeping higher.

So I managed to get it to my mech's workshop (was on my way there anyway), and discovered that I had melted the fuse for my thermo fan. Lucky Lucky Lucky I caught it in time: coolant reached a max of 115deg before shutdown....

I'm now looking at other options: breaker instead of fuse on thermo, or like I orinally wanted: twin thermos on independent circuits: I'm all about redundancy... Opinions?

Stock fan!

Finally fitted my full exhaust on my M35 replacing the old, tired Kakimoto R cat-back

Fitted the AM Performance dump and mid-pipe along with a brand new SS Kakimoto R cat-back

Glad you're very happy with the results, but I am confused.

Kakimoto R (and N1 for that matter) only came in stainless steel. DO you have a pic of the cat-back that was removed by any chance?

Glad you're very happy with the results, but I am confused.

Kakimoto R (and N1 for that matter) only came in stainless steel. DO you have a pic of the cat-back that was removed by any chance?

Maybe it was just a really "old and tired" kaki replaced by a shiny new one...LOL

wish I had the $$$ to replace my not so old but dented Legalis with a new one!

Glad you're very happy with the results, but I am confused.

Kakimoto R (and N1 for that matter) only came in stainless steel. DO you have a pic of the cat-back that was removed by any chance?

No picture but definitely mild steel. Had rust spots everywhere. I didn't know mild was an option but I guess it was back then. It a very old looking unit, the old one had a mid muffler as opposed to a resonator on the new unit.

BTW Ian, got the BOSE sub running.. not bad for a tiny sub. Does the job perfectly!

Is this the factory Bose spare wheel sub into a non Bose factory head unit? Please PM connection details if it is.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...