Jump to content
SAU Community

Recommended Posts

servicing the rs4s and gonna change all the transfercase/ diff fluids.

will be interesting to see if there is a noticable change in driving.

i have heard that people get allot more movement from the torque split guage once doing so.

any recomendations on which diff/ transfer fluids to use? (i assume there going to be the same anyway?)

servicing the rs4s and gonna change all the transfercase/ diff fluids.

will be interesting to see if there is a noticable change in driving.

i have heard that people get allot more movement from the torque split guage once doing so.

any recomendations on which diff/ transfer fluids to use? (i assume there going to be the same anyway?)

No transfer is a good synthetic atf diffs depend on whether you have a mechanical LSD or the viscous one.

Clutch was slipping stressed as it's on 20k old, seems id adjusted it to much on the Slave and through ware it's got to its limit, re adjusted now it's chearpin again :). Also installed a knightrider light! Wanted it since I was 6, lost the remote couldn't turn it off, drove to the shops! Kids pointed and laughed! It would havd been cool in 86 :P

I've painted the grill matt black too but wouldn't get rid of the chrome strip as it will make the car look more dumpy if you know what I mean...

Ive just painted the corner strips, yet to do the doors. If i dont like them, could i strip the paint back with some turps or metho without damaging the factory paint?

Clutch was slipping stressed as it's on 20k old, seems id adjusted it to much on the Slave and through ware it's got to its limit, re adjusted now it's chearpin again :). Also installed a knightrider light! Wanted it since I was 6, lost the remote couldn't turn it off, drove to the shops! Kids pointed and laughed! It would havd been cool in 86 :P

wheres the pics?..lol

cheers

darren

I have 595rsrs on mine mate, they are awesome! I can mash the throttle around a corner and I just get a touch of power oversteer before they hookup on 235/35/18s. With over 300kw atw :)

Did you do the white lettering yourself?

Edited by stageaharts

repaired passenger side electric window switch, was a bit of fiddling with the internals of the switch but got it going again

also adjusted both front windows so they tuck into the slot to hold them in so water doesn't come in, was actually nice and a lot more quite inside the car :)

pads front and rear and put on some d1r's 17x8 +25. pretty much a perfect fit for a daily! need to lower the rear 20mm though. I never bothered re-blacking the bumper trim because i am going to spray them all in kr4. Do you guys reckon i could just rub back the sides and front or will the stuff wreck/seep through under the paint? It's been for roughly 4ish months.

Also Snatch the kitteh

post-108100-0-77013800-1393841268_thumb.jpg

post-108100-0-12384600-1393841367_thumb.jpg

Edited by Stagea97

I've run semis on my other cars but can't justify them yet on the stag ! Cornering is all good with my suspension setup and just the atr's on. traction off the line at the moment with the full race ets pro standalone unit taking over from altessa computer is a lot better, 6k launch slight w/spin and bam out of there:) 10s with 265 on the rear help too see how it goes with the next touch up tune should game a chunk more under the curve !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...