Jump to content
SAU Community

Recommended Posts

Finally got my gas struts regassed today; no more getting belted in the back of the head when I throw backpackers in the boot.

Guess I'll have to get a bat or something to knock them out now.

This has been on my To-Do list for, oh, about 5 years now...

Nice!

Can you get the sedan in a manuel, or are they all auto?

7-speed auto in the KV36 with the 3.7 motor for JDM, but the US got a 6-speed manual... :-) But I do have flappy paddles now!!

looks good smile.gif I'll have to have a think about what I want to do! there is a good satisfaction I suppose when you do it yourself! :cheers:I know there is some pretty good instructions on how to do it on here.. using those magic bar things after the washhave attached an rtf document a made when I copied the instructions off one of the posts long ago biggrin.gifattachicon.gifCar Care.rtf

Nice instructions for car detailing... I'm off to Supercheap Auto :)

Timing belt replaced, fuel filter replaced, airflow meters cleaned, finally found an r33 Gtr aircon compressor but found that the 260rs lines are bigger than the r33 compressor, so now need to find r33 Gtr lines, also purchased a twin 2/1/2 in exhaust off an r33 that I'll get modded to fit, also found the suspension I purchased of eBay was s tune so just sorting out ordering new replacement front shocks, not bad for $65

Edited by poohkies

Timing belt replaced, fuel filter replaced, airflow meters cleaned, finally found an r33 Gtr aircon compressor but found that the 260rs lines are bigger than the r33 compressor, so now need to find r33 Gtr lines, also purchased a twin 2/1/2 in exhaust off an r33 that I'll get modded to fit, also found the suspension I purchased of eBay was s tune so just sorting out ordering new replacement front shocks, not bad for $65

busy day!

I replaced the factory radiator because it had sprung a leak while towing to Bulldelah with a cooling pro one from Just Jap. Actually I'm pretty surprised the original lasted over 300,000klm including about 120,000klm with the 3l.

  • Like 1

Painted my grill satin black today.. got it painted okay but underestimated how much (or little) paint I had left so the inside bits arent so proper but i cant get more paint bah good friday. Looks okay at the moment.

Edit.. also polished up the fog light/indicator lens' as the were cloudy

post-132120-0-14979900-1397793751_thumb.jpg

post-132120-0-74111200-1397793787_thumb.jpg

Edited by c34Florry

Finished off doing a blue dash light conversion today after a few weeks with out a speedo due to dirt and no globes. Also had my car finally back on the road a month or so ago after a second hand motor went in after a yr of being off the road. And also de badged the grill today as well of the stag emblem and the rs four badge

Finished off doing a blue dash light conversion today after a few weeks with out a speedo due to dirt and no globes. Also had my car finally back on the road a month or so ago after a second hand motor went in after a yr of being off the road. And also de badged the grill today as well of the stag emblem and the rs four badge

and painted black like this?

002-4.jpg

Hi guys just sharing our Stagea 260rs After 2 years out of action due to turbo Failure.

Been racepace done their stage 1 engine rebuild with 2860-9 turbo. also did the LED front indicator and Ganador mirror too :)

20140414_171900_zps179d7457.jpg

IMG-20140422-WA0000_zpsffa2488c.jpg

POWER!!!

IMG-20140422-WA0002_zps8bdeb1ac.jpg

  • Like 1

Hi guys just sharing our Stagea 260rs After 2 years out of action due to turbo Failure.

Been racepace done their stage 1 engine rebuild with 2860-9 turbo. also did the LED front indicator and Ganador mirror too :)

20140414_171900_zps179d7457.jpg

IMG-20140422-WA0000_zpsffa2488c.jpg

POWER!!!

That's looks fanastic, love it :) what sort of grill is that? also any more info on the LED's conversion?

That's looks fanastic, love it :) what sort of grill is that? also any more info on the LED's conversion?

It's the Dolphin LED :) mine is the smoked version but you can get the clear LED version. Got it from Yahoo Japan through import monster.

As 66yostagea said the grill is the N/A Grille.

Finally got all the parts needed and had my e-Manage Ultimate installed and tuned last weekend.. Many thanks to Scott & Cihan :worship:

Well worth it IMHO and very happy with the power gains and the attitude of the car. Has made a big difference.. notably in responsiveness and mid range torque. Mods already done include full 3" turbo back exhaust with scotty dump, Turbosmart BOV, Turbotech Boost Controller, Blitz filter, v35 'power duct'. Still running stock turbo, intercooler, injectors, wastegate actuator, fuelpump (soon to be replaced by Walbro). Car made ~180awkw @18psi :thumbsup::D Probably next on the list will be intercooler (and maybe a high flow :w00t:)

post-1882-0-28970800-1398320400_thumb.jpg

Edited by skyguy3804
  • Like 4

Hey Guys

Just thought I'd share what I've done to my M35 since buying it in December, it's an 02 Axis.

Tein wagon adjustable coilovers

Dronell 20x9.5 2 piece wheels

Freeway dolphin 80mm cat back exhaust

Brake upgrade to go on next week!

post-125377-0-61429300-1398488865_thumb.jpg

post-125377-0-00714000-1398488895_thumb.jpg

post-125377-0-89101600-1398488918_thumb.jpg

post-125377-0-64007700-1398488957_thumb.jpg

  • Like 2

Hey Guys

Just thought I'd share what I've done to my M35 since buying it in December, it's an 02 Axis.

Tein wagon adjustable coilovers

Dronell 20x9.5 2 piece wheels

Freeway dolphin 80mm cat back exhaust

Brake upgrade to go on next week!

Exhaust looks awesome! how does it sound?

Also surprising how damn good those wheels look on it. keep up the good work

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...