Jump to content
SAU Community

Recommended Posts

the fords and holdens sound a little bit different to previous years. obviously the new regulations have allowed them to make a few changes. i wouldn't be suprised if we see them change to more modern race engines over the next few years. both ford and chev have race engines in their catalogue with the same sort of tech as the merc and nissan

the fords and holdens sound a little bit different to previous years. obviously the new regulations have allowed them to make a few changes. i wouldn't be suprised if we see them change to more modern race engines over the next few years. both ford and chev have race engines in their catalogue with the same sort of tech as the merc and nissan

The current pushrods donks do an admirable job. They make the figures reliably and they're light in tne right places without multiple overhead cams n stuff .....

Great race, respect for lowndes ability even though I am not a fan.

I would like to know more as to why they have restrictors on the nissan donk.

They need to do something about fuel useage as well, It seemed like an eternity in the pits.

Great race, respect for lowndes ability even though I am not a fan.

I would like to know more as to why they have restrictors on the nissan donk.

They need to do something about fuel useage as well, It seemed like an eternity in the pits.

I'm wondering if the rate that they can get fuel into the cars has changed with the change in the location of the fuel tank. Smaller diameter pipe into it perhaps?

Can confirm that this moment was very awkward for everyone in the Erebus pits.

CH 7 asked everyone to be out of the pits after the start when everyone was standing there eyeballing him lol, did managed to move the sptools banners around behind shane though before we went out.

post-26183-0-46756000-1362362178_thumb.jpg

What a weekend

Very stressful on and off the track, just absolutely fantastic to see almost 12 months worth of work come together and hit the track.

Saturday we hit our first goal, 3 cars at the end of the race ( albeit 1 down quite a few laps ) and no damage. Lots of data gathered over the weekend. issues with the fly by wire throttle on the SP tools car which meant it was pushed off the grid and visited the pits a few times.

Sunday more electronic throttle issues in the SP car and the HHA car.

One of the obvious issues with the COTF is the cabin temps, was hearing around 92C in the foot well of 1 car. all 3 of our drivers have burns / heat blisters covering their feet. visited Dave Wall and the soles melted off his shoes and drove from around lap 50 with no sole just the shoe's inner materials

This is what Dave was driving with on saturday for 30 laps in the high temps

Ouch!!

so i missed the race and news, whats happening with these nissans??

Not the most successful weekend!

Not the most successful weekend!

if anyone thought that off the bat they were going to perform they should be slapped in the face tho....give them a season to get them setup and iron out the bugs then they will start to get the hang of things...

takes years to engineer a decent race car

if anyone thought that off the bat they were going to perform they should be slapped in the face tho....give them a season to get them setup and iron out the bugs then they will start to get the hang of things...

takes years to engineer a decent race car

Yeah but with COTF they are all pretty new cars.... They werent bad, just a few dramas.... The JD cars look pretty good on the track!

Most pre-season testing was short distances and probably in a cooler climate (cant remember where they tested and certainly dont remember the temps).

They were talking about how crazy hot it was in Adelaide

I think in a few races the Nissans might start coming good. Not saying they will be winning races, but think they will improve

The Mercedes might take a bit longer being that they were developed later then the others.

I think it wasn't even that hot at clipsal. I think I remember them saying it was just reaching 30, which comparatively is just warm. Seeing testing was over the hottest months of the year, you would have thought that this was encountered. I understand the point about the short runs, but surely the teams did some long distance runs, going through a whole tank.

Anyway, at least it will be worsted by next race. If it happens again, I would be well pissed as a driver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...