Jump to content
SAU Community

Recommended Posts

52 minutes ago, emts said:

I think your overestimating a stock cars speed.. and under estimating it's reliability

 

Whilst a STI is very quick on a road a stock one on the track just does not have the tyres/suspension to be corning hard enough to really carry enough speed to cause a problem.

plenty of people run STI's on the track and they have no probs car mags run them all the time.

your just  going to do a few 200 -> 60 slow downs, and a set of brembos will handle it fine.

your not going to be pulling low 20's or anything.

monitor your temps adjust your tyre pressure during the day (I assume STI have TPS as the stock imprezza does) and you will be fine,

Sandown is normally 5 lap sessions I would be doing 2 hot 1 cool down and then 2 hot to finish (you then get a cool down coming into the pits)

couple laps of the pits and don't put the handbrake on in the pit.

you are going to have lots of fun.

That's exactly what I thought, the magazines hammer them all day without issues.

I'll keep you all posted anyway with what happens :D

I'm expecting pads to basically be gone and tyres go mooshy after a while. 

The car has giant front calipers it will be fine.

And also got that fluro green radiator ducting so extra cooling.
Will be fine. Maybe bring a hand held temperature gun to measure radiator temp/block temp after session.

  • Like 1

Contribution from my limited experience:

Brake early into turn one on your first flying lap to get a feel for it; people seem to underestimate how cooked their brakes can be coming onto the main straight. That huge kitty litter patch is there with good reason.

Flashbacks to Simons car going through kitty litter and ripping his FMIC apart ? 

Making me wanna just do motorcycle track days again, much cheaper :)

Edited by UNR33L
11 minutes ago, UNR33L said:

Flashbacks to Simons car going through kitty litter and ripping his FMIC apart ? 

Making me wanna just do motorcycle track days again, much cheaper :)

if your intercooler is hitting the kitty litter in a WRX/STI you have bigger problems.

 

so flash back to my first ever track day 

was with WRX club and was meant to be driver training, however I was only entrant so they just dumped me in with regular told me I was in a group with similar speed and just follow them. Note my car was very stock at time

 

first hot lap I was following a wrx to turn one saw his brake point so I hit it 50 meters earlier just to be careful...cue flying straight past corner and into kittly litter..one I finally slowed enough to know was not going hit wall look at mirror to see a MX5 flying backwards into the kitty litter right at me, so powered on out. no damage lucky.

 

went and tracked the WRX in the pits later, semi slicks, Big brake conversion and fully stripped out....damn it.

 

 

21 minutes ago, blah_blah said:

Anyone going to this?

If so come by and say hello ill be competing in Quake

 

 

Thought about it, I wouldn't mind running in the open forza competition with the v8sc

Not much else really takes my interest though

Edited by UNR33L
19 minutes ago, emts said:

if your intercooler is hitting the kitty litter in a WRX/STI you have bigger problems.

 

so flash back to my first ever track day 

was with WRX club and was meant to be driver training, however I was only entrant so they just dumped me in with regular told me I was in a group with similar speed and just follow them. Note my car was very stock at time

 

first hot lap I was following a wrx to turn one saw his brake point so I hit it 50 meters earlier just to be careful...cue flying straight past corner and into kittly litter..one I finally slowed enough to know was not going hit wall look at mirror to see a MX5 flying backwards into the kitty litter right at me, so powered on out. no damage lucky.

 

went and tracked the WRX in the pits later, semi slicks, Big brake conversion and fully stripped out....damn it.

 

 

 I think last track day I did in a car was 8 years ago Winton in my 33 gtr 

The centre caps on my wheels were plastic and melted off :(

What recording app do you use on phones?  I heard Racechrono is good? 

Edited by UNR33L
52 minutes ago, blah_blah said:

Ayyyy ill be there Saturday

I'll try and make it down, just saw there'll be 5v5 CS:GO in the main arena which should be good

I'm guessing the place is gonna be packed

Edited by UNR33L
2 hours ago, emts said:

racechrono on android with a external 10Hz GPS receiver.

 

+1 for this.

That said, have used WITHOUT gps receiver, still gets pretty good/usable/awesome data. Would try it on its own first nowadays with updated/modern phones.

6 hours ago, emts said:

if your intercooler is hitting the kitty litter in a WRX/STI you have bigger problems.

Yep.

First proper track day I did was Rexmas at Sandown.

Didn't kill brakes and tyres that day and it was only allowed to push it at 80% that day. But Platts managed to blew TMIC Y pipe and boost went from 18 to 25psi on 205 block...

1 hour ago, Count Grantleyish said:

Yep.

First proper track day I did was Rexmas at Sandown.

Didn't kill brakes and tyres that day and it was only allowed to push it at 80% that day. But Platts managed to blew TMIC Y pipe and boost went from 18 to 25psi on 205 block...

RIP

The more I read about the EJ the more I cringe 

I mean the Focus RS was the other option ? 

But the rumble is good!

Edited by UNR33L

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...