Jump to content
SAU Community

Recommended Posts

16 minutes ago, MBS206 said:

Driving on the weekend, air con on full blast, opened a window as dog wanted to get smashed in the face with bugs.

No difference in temp, may as well drop all the windows and run full flow air!

 

Obviously these guys live further south in cooler climates where AC continues to operate 😛

I'm down south. It seldom gets hotter anywhere else in the southern cities than it does in Adelaide. When we get 40°C, it's usually for a week at a time. My aircon works, and works well. I just don't need/want it in most circumstances. Even driving home from work in the afternoon for 45 minutes, where the air over the road might be 45°C, I prefer the windows down.

In fact, I use it so seldomly that I needed to get it regassed because it all leaked out somewhere and we couldn't find where, and I really should use it every week to keep the seals wet....but I always forget. It's probably been 2 months since I last remembered to turn it on.

I use AC every time I drive the car. Something* makes the car pretty warm simply by existing. It's how I know the car is truly up to temp, water temp, oil temp, cabin temp.

That said it'll be ~22 and keep the temp down on a 40 degree day. There's no excuse for the deletion of aircon. Ever!

 

  • Like 2

No. It's all Aluminium! :p. And that's the point I'm making, I wouldn't have done it if I couldn't retain AC!

I recently drove it with the center console out, I had thought it was gearbox heat. However after driving it for about an hour, the shifter was still cold and all the heat shielding from the tunnel was working great.

I now think it's the fact that there's headers running behind the steering wheel/infront/underthe driver, and the fact you can feel your ankles warmed when you step out of the car seems to suggest that too.

In any case yeah. Aircon sure is great.

  • Like 2

I seem to recall my VT2 SS with LS1 6 speed getting freaking hot around g/box on long drives. Always assumed it was the box but thinking about it now, there was pacemaker headers either side of it going into twin cats. Greg your assessment of where the heat coming from, sounds about right.

I've got a 10L one, love it. 

Also have the basic SCA parts washer, that mostly sits there as an extra work surface but is very handy when needed. 

 

Edited by No Crust Racing
17 hours ago, GTSBoy said:

I'm down south. It seldom gets hotter anywhere else in the southern cities than it does in Adelaide. When we get 40°C, it's usually for a week at a time. My aircon works, and works well. I just don't need/want it in most circumstances. Even driving home from work in the afternoon for 45 minutes, where the air over the road might be 45°C, I prefer the windows down.

In fact, I use it so seldomly that I needed to get it regassed because it all leaked out somewhere and we couldn't find where, and I really should use it every week to keep the seals wet....but I always forget. It's probably been 2 months since I last remembered to turn it on.

willing to swap your A/C setup for 2 x window switches?

  • Haha 2
10 hours ago, MBS206 said:

So to slightly less de-rail this thread, and bring it back to an earlier, slightly more on topic discussion, Look at what the algorithm is pushing at me...

f**king algorithms...

I'm not willing to click on any unlabelled external link; but I assume it is a hand held device intended to replace a wife

  • Haha 1
34 minutes ago, DaymoR32 said:

willing to swap your A/C setup for 2 x window switches?

Heh. It might be worth it. I turned it on last night because the thunderstorm was causing fogging inside the car. I don't think the compressor came on, meaning that the gas has probably made an exit somewhere. f**ken.

  • Haha 2
1 hour ago, GTSBoy said:

Heh. It might be worth it. I turned it on last night because the thunderstorm was causing fogging inside the car. I don't think the compressor came on, meaning that the gas has probably made an exit somewhere. f**ken.

Now imagine you had working AC, higher quality of life.

12 hours ago, Duncan said:

I'm not willing to click on any unlabelled external link; but I assume it is a hand held device intended to replace a wife

It's safe, I didn't hide it in the quote of someone else :P

 

it was a link to a Facebook video, advertising Vevor 10L ultrasonic cleaner, and they cleaned 6 pistons while still on their rods in it.

 

Been driving the 33 to work past couple of days, have clocked up 350km and decided to change the oil and filter. Going to run some cheap mineral oil for the next thousand KMs. Got some nulon 15w 40 premium mineral oil for cheap off eBay. $28 delivered. It arrived today. Looks like Fastway can actually deliver unlike couriers no thanks.

Break in oil came out looking very clean as one would expect. I cut the filter open and was happy to not find any traces off stuff that shouldn't be there. New filter was fitted and oil filled. Noticed a small coolant drip past couple of days, was coming from lower rad hose clamp. Gave it a little more tension, all good again. 

Went for another little drive in the arvo, pretty close to 400km done so far. Haven't thrashed it's tits off quite yet, maybe after another 200km.

 

IMG_20231213_181348557_HDR.thumb.jpg.9c3b4a4e51c21c947a35293d58fb8fd3.jpg

  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...