Jump to content
SAU Community

Recommended Posts

1 hour ago, BakemonoRicer said:

Are you aware the CD009 will become the lowest point on the car? They hang a LOT lower than the chassis rails, just an FYI. 

What you need is a Samsonas....... 

lol... fuark the peer pressure is real, also my car isn't that low (as you can see in the photos).

 

38 minutes ago, BakemonoRicer said:

Paintjob looks mad.... did you take the strut towers off to do a rust repair while engine out?

 

E.g. 

http://blog.garage-yoshida.net/wp-content/uploads/2021/02/IMG_0100.jpg

http://blog.garage-yoshida.net/wp-content/uploads/2021/02/IMG_0099.jpg

We sanded the towered back to bare metal around the rust areas, wasn't as bad as those photos. Hit is mum with rust converter and re-sealed, then painted over.

For real, I am currently shopping for a very expensive gearbox while my clutch is out. (???? cars...)

Buy once, cry once, then enjoy the benefit.

That said is there actually any benefit with a Samsonas for your intended use 😛

1 hour ago, Kinkstaah said:

That said is there actually any benefit with a Samsonas for your intended use 😛

Can grab another gear mid drift at Powercruise and look like a sik karnt :D

But no.. I will not Samsonas my car.

  • Like 1
35 minutes ago, Dose Pipe Sutututu said:

Can grab another gear mid drift at Powercruise and look like a sik karnt :D

But no.. I will not Samsonas my car.

But how can this should work at all ? . . . . . 

Easy samosa recipes to cook at home during lockdown

2 hours ago, dr phil said:

Somebody please do a BMW DCT conversion. There is a GTR kit now for the transfer case too.

I looked into this for the LS! It looks like there's an adaptor plate for the LS, and the gearbox itself....

... and nothing else. No easy to find dimensions/sizes of things, no electronics, 
Noone sells the rest of the 'kit' to make it actually 'work'.

But I wish they did >.>

18 hours ago, dr phil said:

Somebody please do a BMW DCT conversion. There is a GTR kit now for the transfer case too.

I'm looking at this for the Silvia using HGTs stand alone. It "appears" on paper to not be that much more than CD009 conversion, but obviously with a little more work/complexity. 

As my car will only be a little 4cyl, I am hoping I can get away with the ZF8HP70 or 75. 

Flappy paddle last minute corner entry/exit changes would be pretty hektik though... 

  • Like 1
23 minutes ago, ActionDan said:

Flappy paddle last minute corner entry/exit changes would be pretty hektik though... 

Very sex, this is why you see M2/3/4s at Wakefield just fly out of the fish hook, all the manual boys trying to rev match, shift dis dat, they're just cycling through the gears and flying out.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • This is aem disk setting in aem tuner and still 180 dgree off or ignition on exhaust cycle is it from cas it self as cas seems wouldn’t fit in cam shaft if wrong position and wiring been verified any ideas 
    • Oh yeah that would work excellent. Should be the same diff housing & everything. Shoot me a text or call me 260-750-2246 -Cody 
    • Oh right, I didn't realise it was your car. Please do! Makes me feel better about mine. I also have a big scrape on the front left bumper where someone presumably used the wall to guide the car into a parking spot  But somehow all the funds go towards mechanical things and the cosmetics stay forever unfinished... Interesting, I don't think I have seen it before. But after seeing @PranK's rusty roofline on the BMW I'd probably leave it alone. Wouldn't want water to get in there.
    • Thanks mate, thought you might know the answer.     
    • Infiniti US are teasing a manual Q50 as a way to refresh a (very old) model. https://torquecafe.com/manual-performance-sedans-arent-dead-yet/ Can't be too technically difficult given the Z has the same motor with a manual gearbox......here's hoping there is a JDM version we can import here, that would save me a world of headaches
×
×
  • Create New...