Jump to content
SAU Community

Recommended Posts

Well you can always stick with a 2.6 or 2.8 and just go for big revs to make up for the little bottom end? You will definitely need good rods and bolts for that, probably a billet girdle too so you can eliminate any risk of crank walk at high revs. 

Piggas car is a great street car, but it's not a DON mega build car that will destroy all, but he didn't build it to be that. If that's frightening at the moment, then maybe start with a DON "medium" build, get used to the power first and build a second engine for later. That way you can get away with a little 8474 and a standard gearbox until you're ready for a full DON mega build. 

 

Mega builds cost mega bucks. Maybe ring around and see if any of the big workshops want to get involved and sponsor you. Being associated with big build GT-Rs is good for their business anyway. 

If that doesn't work out, just go mid spec on the little 2.6 for now and try not to race any fast cars. 

Don't forget, don't flog it with -7s on it if you're running high boost and when it comes time to tune the EFR, keep the torque low in the midrange until you've got some decent rods in it (same thing all the EVO guys do with their EFRs until they get around to building a good motor). 

Maybe it would be cheaper and easier to buy Piggaz car? 


 

Just now, r32-25t said:

Or you could just buy piggy’s car and save a shit load of time and money 

The problem is I don’t have the venture capital. I’ve got an R33 GTR & S15 and after this round of mods I’m damn near broke. 

4 minutes ago, BakemonoRicer said:

The problem is I don’t have the venture capital. I’ve got an R33 GTR & S15 and after this round of mods I’m damn near broke. 

Just "Capital"

"Venture capital" is when you're funding start-ups and doing things like Angel Investing etc, usually done by private equity firms but can be a single person in some instances. 

Maybe get some finance, buy Piggas car, put his running gear into your cleaner shell. Put your little 2.6 and stock box into his shell and sell it off to someone with lower standards then clear out the finance. 

Or just be happy for now with the baby 2.6 and maybe a small EFR detuned to make it safe? Call it a DON Mini build? 





 

Mine has a 2.8 bottom end (Tomei). It's rated by them to 800hp (IIRC). If I was going to spend the insane amount of cash the last owner did, i'd be looking at 3L+, i'd be doing away with the 2.6 block. 

The total of the components (that I have receipts for) is something like 35k in parts alone. Add to that a bunch of time that must have been paid for and the fact i've dropped another 10k into it. What I have is a very capable and (seemingly) solid build for up to 500kw atw. Anything more than that and i'm going to start to break things (probs gearbox). 

If my build were to happen today, I can guarantee that it wouldn't have a 2.6 (or 2.8) in it. It would have been a 3.0L block stroked. I expect that they also would have dumped the twin turbos and gone a decent single.

If you're going all out, you've really got to consider buying the right parts first time and don't worry about trying to make the 2.6 produce a million kilowatts. Build an engine on the side if that suits you better. The more money you put into the 2.6 the less you will have for your goal engine. If you don't know what your goal engine is, start with your power level and work backwards. You might find it's closer than you think.

Also GTR ownership itself doesn't seem that expensive, it's the modifications that get you. ?

  • Like 1

The first thing to always do, is work out what you want to achieve with the car. 

Is it going to be for drag racing?

Circuit racing? 

Daily driving? 

Midnight runs through Natio? 

 

Having all out bullshit crazy power can make any car less fun to drive if for example you want to drive spiritedly through Natio, because it'll be a lag monster, and then you'll be fighting wheel spin on already low grip roads. It would also make it useless for circuit work if you want to do that, and it means in a 0-80kmh run without a big launch or rev up, the p plater in his mums commodore is likely to beat you.

 

For a street all round package, a hugely responsive package, that has wicked suspension, big brakes and grumpy tyres is king. It's also going to be decent at the drags, and on the circuit and killer through the Natio. 

My "ideal" GTR that's a great all rounder would be something like Eric's R33. 

I have no idea what Piggaz car is currently like to be able to comment if it'd also be suitable. 

 

 

PS, I've made the mistake of chasing power, and power is useless if you can't use it all or it's not available when you want it. Though, fourth gear rolling skids on the freeway are both fun and f**king scary... 

  • Like 2
10 minutes ago, Steve85 said:

Is this the R33 LM (Approx 400hp atw) you're talking about? Or a different Eric? 

Eric from SAU NSW, white GTR, now moved to NZ.

I think it was about 350kw.

2 minutes ago, r32-25t said:

Different Eric, the one he is talking about has a white one and I can tell you piggy’s is better then it in every detail 

 

2 minutes ago, MBS206 said:

Eric from SAU NSW, white GTR, now moved to NZ.

I think it was about 350kw.

Time to go stalking people on SAU! :)

Thanks for the responses. 

My small bit of advice.

1. Every good build needs a budget.

If you don't budget a 30k build turn turn into a 60k build.

2. Someone always has more money and a faster car.

3. A fool and his money is soon parted.

Realistically, Piggaz car is the best decision possible.

The reality is, the next EFR stage is a $65k exercise allowing for brakes/sequential/diffs/turbo package/fab/retune. However, I have time on my side as I’m sure there’s fun to be had in the current package. And then, I’d need to budget for a built motor...and by then I’ll have a car with as big a spend as Piggaz.

Logistically, attaining Piggaz car is next to impossible without finishing both the S15/R33 GTR and selling both.

Selling the S15 is a major challenge because of how much money has been pumped into it and how little they’re selling for. Sure it’s stuffed full of good bits but I don’t know what I’d be able to get for it. And plus, after nearly 4 years off the road I’d love to see if it’s a really fun fruitcake to drive.

I have to say, without making a post with my usual sense of humour, that building cars has been the biggest rollercoaster decision I’ve ever made. There is a LOT of stress involved, so it’d be nice to turn the key to something that’s just DONE.

I could stop now and enjoy both cars, but is that possible, I’m 90% sure it’s not....

Hmm, it’s a bad feeling being at a crossroads....

 

 

If you go that way, The engine in the S15 is worth more out of the car, trust me. 

Building 2 cars simultaneously is always going to be a tough gig. 

If you have to spread your time and money I would be inclined to tune the -7 setup, flex fuel, and leave as is with a comfortable 450rwhp or there abouts. If you want a bit more fun, sell the twin setup and just go a basic garret GTX single setup, they can be done quite cheaply with good results and not need anything else. 

Then you can just drive it and enjoy it, not worry about brakes/box/diff as they are all fine at that power. Finish the S15 and enjoy that, to be honest, given what the S15 will be capable of making, you are going to need a very decently powered GT-R to match the power to weight of the S15. 

I had the same issues when deciding to stick with S chassis or not, in the end, I can go much faster for less $$ in the Silvia and I wanted to buy a big property so that was the compromise (sell GT-R). 





 

I'm with Dan, tune what you have now in the GTR and make it fun. Make it a responsive daily, keep it neat and clean. 

Push the envelope of stupidity (fun/power/shits and giggles) on the S15.

 

I have no idea what fuel system you have in the 15, but I'd likely put the one in the GTR into the 15, and just run a decent intank pump in the GTR for street/cruise/muck around. 

If you take it to the track, just keep the tank full. 

 

If you keep dumping money at the GTR you'll never finish the S15 and it will just devalue and end up rotting away. 

5 minutes ago, MBS206 said:

Is Piggaz even selling his, or is it a case of "everything is forsale if the money is right"?

I’ve driven it once this year, owned it for 12. 

Time for a change I think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...