Jump to content
SAU Community

Recommended Posts

He's actually a geological engineer for a mining outfit, very smart and very friendly and helpful. He just happens to have been raised in a farming community where "pests" are shot. 

Maybe go for slightly less broad strokes with that brush of yours ;) 

 

 

 

 

2 hours ago, ActionDan said:

Oh man, the neighbour has enough guns for everyone. 

His face when I said I owned zero guns and had no interest in getting any was very obviously one of "but... what do you mean?!" whilst trying to be polite lol
 

It really is a sad state of affairs.

Not really that sad, they are just "tools" to get a job done. 

I have 2 chainsaws, not because I love chainsaws or I'm anti trees or want to cut everything down, but because I need 2 chainsaws to do my job of collecting firewood efficiently. You can argue that I should not be cutting up fallen dead trees because insects and critters could live in there etc etc, but the bottom line is, it's my property and I'm allowed to so it's my choice. 

He has sheep, foxes eat his lambs at an alarming rate, so he removes those foxes from his property. His property, his choice.

My comment about his reaction was just a laugh about two different cultures meeting, I wasn't raised on the land so my exposure to rural living is very different to his. Not right or wrong, just different. 

  • Like 1

lol, big difference between living on a property vs living on a farm. 

Farmers farm things, animals, crops etc. I just happen to live on a chunk of land that is fenced. 

Certainly more work than a house block though.

Enjoy the festival. 

 

5 hours ago, ActionDan said:

Not really that sad, they are just "tools" to get a job done. 

I have 2 chainsaws, not because I love chainsaws or I'm anti trees or want to cut everything down, but because I need 2 chainsaws to do my job of collecting firewood efficiently. You can argue that I should not be cutting up fallen dead trees because insects and critters could live in there etc etc, but the bottom line is, it's my property and I'm allowed to so it's my choice. 

He has sheep, foxes eat his lambs at an alarming rate, so he removes those foxes from his property. His property, his choice.

My comment about his reaction was just a laugh about two different cultures meeting, I wasn't raised on the land so my exposure to rural living is very different to his. Not right or wrong, just different. 

Rural people who shoot foxes, dogs and other ferals to protect their land I have no issues with, they usually have a few different types of weapons for different occasions, I have no issues with that.

It's the yobbos with multiple weapons that cause the issues. It's like they are compensating for their massive insecurity.

They talk about hunting but never hunt, they talk about self defence, but they end up shooting members of their family, their kids shoot themselves, or, the weapons are stolen.

Yeah, I hate guns in the hands of the average Joe bogan racist idiot......I'll stop spraying now

 

images.jpeg

  • Like 1
23 hours ago, BakemonoRicer said:

Well to be fair everyone was on the house bandwagon and look what happened to that...

I predicted the crash 3 years ago, wish I had the know-how to of 'shorted' the market lol

Predicting a heads or tails outcome isn't difficult, cause a stopped clock is right twice a day. People had been "predicting" a correction or bubble burst for about the last ten years...no one was able to say exactly when and those who did ended up very wrong. Too many variables to call that one...

Car was fired up as of yesterday afternoon and is running....

It should see the dyno at some point this week or next

How much power do you guys think it'll make ? Noting the head is ported & polished as well....

 

 

  • Like 1

On E85?

No more than 340-350rwkw, but as mentioned I would not expect turbos to last. That's more -9 territory.

330rwkw is about where I'd aim as a max on ethanol, the engine and head will want to make more but those -7s wont be loving life.

When you say hitting the dyno, I'm assuming you're tuning it to clean up the richness and make it a lot nicer?

If tuning, very low 300, but it should be nice and responsive and fun as hell to drive. Will make a wicked fun daily. 

  • Like 1

Dose....twin restrictions.....good way of describing them lol

Matt we are doing a full flex tune with an Emtron, & I've got oil & fuel pressure / temp sensors in place as motor protection.

Dan, I'm a little bit gutted that it's not already single tbh....I mean 330 should make a plenty fast street car....but I'm not sure if thats enough to be "scary".... well, for my latina passengers it will be but maybe not for me after being in Piggaz car.

It's pretty annoying that for nascar grade power its nascar grade money.

I told you, you can sell the twins and do a cheap GTX single easily enough using used parts.

330 on -7s will be zippy, but not scary. Especially after your ride in Paul's car. 

I had 380 and more torque than you will make and it felt like it needed another 100kw to be honest.

You have all the other bits to throw a cheap single on and make 400+ easily enough.

  • Sad 1

You keep asking this question Benny. It’s going to be the same power as any other -7 car before it or after it, it just will be.

Is you exhaust decent or is it a Japanese Samuari nugget? 

330 kw at 24 psi. I’ll buy you a car of piss if it goes north of 340 kw at 24 psi. With no cam gears it’ll be late 4000’s/5000 rpm to reach target boost in 2nd.

How it drives sub 5000rpm now, it’s not going to change too much. A little bit not much.

Is what it is mate. ?‍♂️

Guess it depends on how much you are willing to spend and what feels normal. I get 360kw @ 22psi on e85 on -9s in my 2.6 and I love it. That feels excellent as "normal" is walking home from work on arthritic knees.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...