Jump to content
SAU Community

Recommend diff for track


Recommended Posts

I run a 2way full time. All comes down to have you like your set up to be. I’m a little happy on the track with front brake bias high and steer with the rear. If you don’t like the rear being a little loose on corner exit just run a stock lsd and you will be fine

Link to comment
Share on other sites

The thing is, all 1 ways, 2 ways, 1.5 ways etc are all 2 ways, just with different ramp angles.

If you want to go down the rabbit hole, go asking for ramp rate specs on diffs. Nismo actually only make a 1 way and a 2 way diff.

I'd wager that's the same for most manufacturers.

The "1.5 way" people are talking about is likely the 1 way, i.e the 45/90 ramp diff. (45 accel, 90 decel). My old "2 way" diff was also a 'real' 1.5 way with ramp angles of about 45/60.

Are other 2 ways true 45/45 '2 way' diffs? You'd have to ask. As for what is best... well, it really depends a lot of your driving style.

Link to comment
Share on other sites

For what it is worth the Nismo 1.5 way I have is so fkn tight it may as well be a two way.  Shits me to tears it does. Clunkety clunk clunk.

It isn't just the ramp angle that is key here.  The amount of preload on the clutch packs before you add the motors torque is also important.  Get much of that and the diff will be an annoying clunkfest.

Link to comment
Share on other sites

@admS15That looks like a 1.5 way. Assymetric ramp angles.

What djr said is correct. The ramps define how much of the locking power is applied on accel and decel, (ie 1, 1.5 or 2 way) and the rest of the diff (the number of clutch plates, springs etc) in the mechanism define the breakaway torque. You can make a 2-way diff with low breakaway torque that will behave nicely without clunking, but it will open up earlier than you might like. Or you can make one that might as well be welded. Cusco have a range of different diffs that cover that span and some even offer adjustment of how tighjt they are.

  • Like 1
Link to comment
Share on other sites

Not only the ramp angle and preload, also th eplate layout has a impact. Kaaz diffs can be set with the clutch pack stacked according to desired friction amount by a alternating the plates.

Link to comment
Share on other sites

11 hours ago, Dose Pipe Sutututu said:

and my mate's 1.5 way looks like the below (not his photo)

image.png.e546888de035199f8d9a58ce4c9c772a.png

 

This is a 1 way 😛

Good example though! 😛

but yes when selecting a diff.. "1 way" or "1.5 way" or "2 way" is very much like "Stage 1 turbo". There's not really enough information there.

Link to comment
Share on other sites

I guess they key point is, you don't want/need a diff that locks the wheels together under deceleration as that promotes understeer on turn in. If you are buying, preference should be 1 > 1.5 > 2.

Having said that the GTR (non 33 vspec) factory diff is a mechanical 2 way and can be readily shimmed for the level of carpark clunking you want, That's all we use in the race car and it is a good thing, thanks Nissan.

Link to comment
Share on other sites

On 05/01/2021 at 9:03 PM, DIABLO33 said:

I was thinking 1.5LSD or open diff

Hey guys,

Just wondering what the benefits of an open diff are when compared to any sort of LSD on track? Genuine question.

 

Link to comment
Share on other sites

6 minutes ago, ERO54N said:

Hey guys,

Just wondering what the benefits of an open diff are when compared to any sort of LSD on track? Genuine question.

 

There are none.

  • Like 4
Link to comment
Share on other sites

49 minutes ago, ERO54N said:

Hey guys,

Just wondering what the benefits of an open diff are when compared to any sort of LSD on track? Genuine question.

 

When you've binned your car and one wheel/hub is completely seized but you want to try drive it back to the pits.

 

  • Like 2
  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • For future reference, I believe all that Amayama does is act as a middleman between you and Nissan. Go to your local dealership, ask nicely for a parts account (I get 15% off with mine) and you'll get better pricing. Cheers, 
    • Hi guys, I have a 2005 V35 skyline with the vq35de.  It is a drift car and has been stripped, its now running a standalone ECU and a body harness. Dash everything has been changed to a digital dash controlled by ecu.  The vq35de has been great, very reliable but wanting more HP atm the 35de is making 228rwhp. I'd like to be making about 350rwhp. From my research it looks like a vq25det lightly modified could be a good engine to swap in. I understand the CD trans will bolt up right to the vq25det with a 35de sump used.  My only issue is a wiring harness/ecu to control the vq25det, from what i've found the ecu is a lot different to the vq35de so my plugin for the 35de will not work. Is there any potential to use the vq35de wiring harness and modify as necessary to retain the plugin ecu?  Keen to hear what you guys think, or am I best off to chuck on a cheap turbo kit on the 35de and see how long it lasts.   
    • Oh sorry Justin! I was racking my brain trying to remember names, not sure why I associated “Adam” with 7tune! I’m good, been away from Skylines for over a decade, got family and kids now. Just getting back into owning a 32 but it’s a whole different world now… tax is higher and tech is better.
    • Who's Adam? Hehe 😁All good mate, it's Justin. Been good! And you? The HCR32 is looking sweet by the way! Love the very neat Nav install.  I would love to get one but I'm at a crossroads right now and can't commit to another car. 
    • Wtf. $1000 for knockoffs? Tell em they’re dreeeeamin!
×
×
  • Create New...