Jump to content
SAU Community

Recommended Posts

16 minutes ago, MBS206 said:

Driving on the weekend, air con on full blast, opened a window as dog wanted to get smashed in the face with bugs.

No difference in temp, may as well drop all the windows and run full flow air!

 

Obviously these guys live further south in cooler climates where AC continues to operate 😛

I'm down south. It seldom gets hotter anywhere else in the southern cities than it does in Adelaide. When we get 40°C, it's usually for a week at a time. My aircon works, and works well. I just don't need/want it in most circumstances. Even driving home from work in the afternoon for 45 minutes, where the air over the road might be 45°C, I prefer the windows down.

In fact, I use it so seldomly that I needed to get it regassed because it all leaked out somewhere and we couldn't find where, and I really should use it every week to keep the seals wet....but I always forget. It's probably been 2 months since I last remembered to turn it on.

I use AC every time I drive the car. Something* makes the car pretty warm simply by existing. It's how I know the car is truly up to temp, water temp, oil temp, cabin temp.

That said it'll be ~22 and keep the temp down on a 40 degree day. There's no excuse for the deletion of aircon. Ever!

 

  • Like 2

No. It's all Aluminium! :p. And that's the point I'm making, I wouldn't have done it if I couldn't retain AC!

I recently drove it with the center console out, I had thought it was gearbox heat. However after driving it for about an hour, the shifter was still cold and all the heat shielding from the tunnel was working great.

I now think it's the fact that there's headers running behind the steering wheel/infront/underthe driver, and the fact you can feel your ankles warmed when you step out of the car seems to suggest that too.

In any case yeah. Aircon sure is great.

  • Like 2

I seem to recall my VT2 SS with LS1 6 speed getting freaking hot around g/box on long drives. Always assumed it was the box but thinking about it now, there was pacemaker headers either side of it going into twin cats. Greg your assessment of where the heat coming from, sounds about right.

I've got a 10L one, love it. 

Also have the basic SCA parts washer, that mostly sits there as an extra work surface but is very handy when needed. 

 

Edited by No Crust Racing
17 hours ago, GTSBoy said:

I'm down south. It seldom gets hotter anywhere else in the southern cities than it does in Adelaide. When we get 40°C, it's usually for a week at a time. My aircon works, and works well. I just don't need/want it in most circumstances. Even driving home from work in the afternoon for 45 minutes, where the air over the road might be 45°C, I prefer the windows down.

In fact, I use it so seldomly that I needed to get it regassed because it all leaked out somewhere and we couldn't find where, and I really should use it every week to keep the seals wet....but I always forget. It's probably been 2 months since I last remembered to turn it on.

willing to swap your A/C setup for 2 x window switches?

  • Haha 2
10 hours ago, MBS206 said:

So to slightly less de-rail this thread, and bring it back to an earlier, slightly more on topic discussion, Look at what the algorithm is pushing at me...

f**king algorithms...

I'm not willing to click on any unlabelled external link; but I assume it is a hand held device intended to replace a wife

  • Haha 1
34 minutes ago, DaymoR32 said:

willing to swap your A/C setup for 2 x window switches?

Heh. It might be worth it. I turned it on last night because the thunderstorm was causing fogging inside the car. I don't think the compressor came on, meaning that the gas has probably made an exit somewhere. f**ken.

  • Haha 2
1 hour ago, GTSBoy said:

Heh. It might be worth it. I turned it on last night because the thunderstorm was causing fogging inside the car. I don't think the compressor came on, meaning that the gas has probably made an exit somewhere. f**ken.

Now imagine you had working AC, higher quality of life.

12 hours ago, Duncan said:

I'm not willing to click on any unlabelled external link; but I assume it is a hand held device intended to replace a wife

It's safe, I didn't hide it in the quote of someone else :P

 

it was a link to a Facebook video, advertising Vevor 10L ultrasonic cleaner, and they cleaned 6 pistons while still on their rods in it.

 

Been driving the 33 to work past couple of days, have clocked up 350km and decided to change the oil and filter. Going to run some cheap mineral oil for the next thousand KMs. Got some nulon 15w 40 premium mineral oil for cheap off eBay. $28 delivered. It arrived today. Looks like Fastway can actually deliver unlike couriers no thanks.

Break in oil came out looking very clean as one would expect. I cut the filter open and was happy to not find any traces off stuff that shouldn't be there. New filter was fitted and oil filled. Noticed a small coolant drip past couple of days, was coming from lower rad hose clamp. Gave it a little more tension, all good again. 

Went for another little drive in the arvo, pretty close to 400km done so far. Haven't thrashed it's tits off quite yet, maybe after another 200km.

 

IMG_20231213_181348557_HDR.thumb.jpg.9c3b4a4e51c21c947a35293d58fb8fd3.jpg

  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...