Jump to content
SAU Community

Recommended Posts

Hi Geoff

Just to clarify would a EFR9174 "super core" , would fit my 8374EFR? Or does the housing needs to be modified?

Its on a street/weekend 2.7L 33 GTR with all supporting mods, I've got the feeling with 8374 EFR (400-450 awkw) I could go bigger later ,so might as well do it now .

Thanks

Bruce

 

15 hours ago, Shyboy said:

Hi Geoff

Just to clarify would a EFR9174 "super core" , would fit my 8374EFR? Or does the housing needs to be modified?

Its on a street/weekend 2.7L 33 GTR with all supporting mods, I've got the feeling with 8374 EFR (400-450 awkw) I could go bigger later ,so might as well do it now .

 

Yes, 9174 supercore will be plug and play for 8374 EFR turbo.  you dont need to remove the turbine housing, just loosen the cam bolts and swap supercores.  let me know if you need one we have a few incoming

On 5/3/2017 at 6:20 PM, Nismo 3.2ish said:

I was wondering if the 8474 is still being tested or dropped completely ?

still being tested.  you will probably get some more hints at sema.  The other EFRs will not change or get discontinued, they all remain relevant and have their place

  • Like 1

I've finally got my twin 6758 kit in the mail at the tuner's this week, so the build begins. Pretty excited to see what it will do both on the dyno and on the street. Will post full results in a month or two once it's done.

  • Like 2
30 minutes ago, Robzilla32 said:

 


What application is it best suited to? Most people on this site seem to bag the twins and say big (usually EFR) single is the way to go.

 

I am still interested to see more as well, There has been a lot said about them and I can see the potential but there is so little real world info I am treating it as unchartered territory so stick to what I have more an idea about.

 

For what it's worth, the main issue I have with twins on GTRs is stock location packaging etc - any turbo is a single turbo for what it's worth.  

 

I would love to see turbine speed sensors on twins going into a common plenum.  @Full-Race Geoff, have you guys done any turbine speed logging with the twins kits?

Edited by Lithium

They overlap though, so even if there's 2x 6258's they're just walking into 8374/9180 territory.

Could only imagine twins if going for truly stupid power on a 3.4L or something like that?

11 hours ago, Robzilla32 said:

Most people on this site seem to bag the twins and say big (usually EFR) single is the way to go.

I dont know many people on this site who bag twin EFRs, but single EFR is most common and for good reason: excellent performance and simple to retrofit existing greddy or HKS installations.  Twin IWG works better than single IWG and twin 6258s have a noticeably better throttle-link-to-boost-response than the big 9180.  Its not for everyone, but we have some customers in russia, europe and japan who are now only purchasing our twin RB kits. twin EFR means no dumptube headaches and no backpressure issues choking on 0.92

11 hours ago, Lithium said:

@Full-Race Geoff, have you guys done any turbine speed logging with the twins kits?

we have logged on the 6258 2.8L car here but it runs well and reliably, doesnt require much oversight.  the twins are almost never operating near max speed limits or emap choke points like the big singles so its not been nearly as critical as with the 9180 or 9174/8374. 

8 hours ago, Kinkstaah said:

They overlap though, so even if there's 2x 6258's they're just walking into 8374/9180 territory.

Could only imagine twins if going for truly stupid power on a 3.4L or something like that?

in terms of mass airflow rate, twin 6258s are a little bigger than a single 8374.  but smaller than 9174 or 9180. 

Edited by Full-Race Geoff
I dont know many people on this site who bag twin EFRs 


Sorry my post wasn't worded very well. I meant to refer to twins in general being considered inferior to a modern big single. I was wondering if there was something different about the EFR solution that changed that thinking?

Cheers
4 hours ago, Full-Race Geoff said:

we have logged on the 6258 2.8L car here 

Do you have any data on it?  I often wonder if the front and rear ones work similarly hard or if there are situations one may end up taking more load than the other.  I'd guess that more likely with stock location twins, but still curious

  • Like 1
4 hours ago, Lithium said:

Do you have any data on it?  I often wonder if the front and rear ones work similarly hard or if there are situations one may end up taking more load than the other.  I'd guess that more likely with stock location twins, but still curious

Thats something im actually curious about. 

Speed sensors on both turbos to see just how they both share the work load together. 

Curious if its the rear turbo that works harder like the factory stuff does?

Obviously the removal of that horrible "twin turbo pipe" would help eliminate most of that. 

On 08/05/2017 at 6:38 AM, Robzilla32 said:

 


Sorry my post wasn't worded very well. I meant to refer to twins in general being considered inferior to a modern big single. I was wondering if there was something different about the EFR solution that changed that thinking?

Cheers

The 'twins' comparison you see around here is alawys done in the context of rb26 stock location/piping GT28 twins, vs singles. That somewhat skews things.
Doing a full custom twins vs full custom single with no constraints (read AC/PS pump in the way) and using EFRs for both you'd probably find the comparison quite different to an 8374 vs -5's for example

  • Like 6
2 hours ago, bri73y said:

My twin 6258s made over 700hp at all four last tune. All in (28psi) at around 4700rpm. Not too shabby.

Sounds mad :)

Please post the graph and any other info, love to see it

6 hours ago, bri73y said:

My twin 6258s made over 700hp at all four last tune. All in (28psi) at around 4700rpm. Not too shabby.

Which GTR was this in? I am working on doing the twin setup on mine as well but am having issues with the power steering pump. Did you have an R32? Did you replace your p/s pump with something else?

11 hours ago, bri73y said:

My twin 6258s made over 700hp at all four last tune. All in (28psi) at around 4700rpm. Not too shabby.

Nice!  Is the R33 still cranking with the 7670?

Out of interest the single EFR9180 on my mate's RB28DET is all in at about the same boost at similar rpm.

 

Edited by Lithium
6 hours ago, minesskyline said:

Which GTR was this in? I am working on doing the twin setup on mine as well but am having issues with the power steering pump. Did you have an R32? Did you replace your p/s pump with something else?

You need to use an R33 or R34 power steering pump, then everything will fit.

  • Like 1
1 hour ago, Lithium said:

Nice!  Is the R33 still cranking with the 7670?

Out of interest the single EFR9180 on my mate's RB28DET is all in at about the same boost at similar rpm.

 

Sure is, can't see that changing anytime soon, it's a great combo for anything you want to do. It's currently having a makeover with a wide body kit and respray in Audi Nardo Grey. It's nearly complete, looks good, but most importantly I will now be able to run my GTR wheels/tyres (wider) under her.

Yes, Brett (from Full Race) has told me several times there's no real advantage in going 9180 over my twins.I did try the larger rears (0.8) on the twins last year chasing more power but gained bugger all whilst losing easily 400-500rpm in response. 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...