Jump to content
SAU Community

Recommended Posts

On 10/20/2022 at 4:05 PM, The Bogan said:

Which one? BA, BF or FG

BA BF = $100 for a long

FG = $150 for a long motor 

My mate at work is constantly bending my ear in all things Barra

Not bad for a base that is so capable and easy to build for small change

yeah its ridiculous how cheap they are. and you can get silly power from a stock block

On 10/18/2022 at 6:15 PM, r32-25t said:

That was my thinking when I bought the billet block, yes it costs more to begin with but it wasnt much more compared to buying another cast block and doing everything to strengthen it properly and I still would have had a weaker block at the other end 

It's really unfortunate IMO that billet means it's no longer really streetable. I want an engine that you can count 10 seconds and start driving as long as ambient temps are over 5C. I'm also not super wedded to 8mm thick liners or anything like that, my power requirements are comically low and covered by stock block but it's really everything else that keeps me up at night.

7 minutes ago, joshuaho96 said:

It's really unfortunate IMO that billet means it's no longer really streetable. I want an engine that you can count 10 seconds and start driving as long as ambient temps are over 5C. I'm also not super wedded to 8mm thick liners or anything like that, my power requirements are comically low and covered by stock block but it's really everything else that keeps me up at night.

I wouldn’t spend 10 of thousands of dollars to build an engine and hit the key and rip my foot off the clutch the second it fired no matter what material the block was made from, I’d warm it up either way so it makes no difference. I’ve seen plenty of billet blocks driven on the street now and know that I’ve made the right choice 

  • 3 weeks later...

Be nice to have a new cast block I'd say.  Mine been 600hp for 8 years with stock R33 GTR block i brought from the wreckers for $400 and got it scanned etc.

Almost time for a refresh with 50,000km+ on it :).

Kids have slowed down the KM's on it now days though.

Edited by Stixbnr32
  • Like 3
  • 6 months later...

and found the important bit

 

Q: what’s the price point?
A: Don’t hold us to it but our target price is around 8k for the 1500hp version and 10k for the integrated main cap version with 4 bolt main option 3000hp.
Note: We aim to include main bolts and ALL machine work to spec for a ready to build torque plate finished solution.
  • 2 weeks later...
  • 1 month later...
9 hours ago, Butters said:

next update

 

On paper, this would be epic

4 bolt mains

better oil drains

90mm + bore 

thicker deck 

 

PRP are seriously leading the world in RB’s.  From where Herman started to where he’s taken that brand is phenomenal. Australia is at the absolute forefront of investment in a 30+ year platform!

  • Like 1

Not the same engine, but good talk about billet, and the issues and requirements for building big HP alloy blocks that can survive on the street, well, survive for a while anyway without needing pre warming the block

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...