Jump to content
SAU Community

Recommended Posts

Not so much a what have I done but a what I will do when the wife and kids give me 5 minutes of peace!

attachicon.gif2015-11-29 09.27.43.jpg

Next on the list will be coilovers, looking at MCA, Blitz ZZ-R and BC BR RS.

Anyone running the Blitz or MCA or anything else they are happy with?

whats in the innovate box mate?

Whats the fitment like with the blitz kit? Hit a possum a few months back and have been having random boost leaks since and I've narrowed it down to the cooler itself being warped and not sealing properly, with my current HDi cooler.

Thinking to just replace the core but the blitz kits tempting whats left of my "JDM yo" honda feelings

Thrashed it at the Snowy 1000

Ran 22.49 @ 233.5 kph, better ET than I expected but was hoping for a quicker trap speed.

Was quite happy the wagon was able to drive home as many cars didn't survive the day.

  • Like 1

Ok so as promised....

I had more time to spare to go check out the M35 as we get closer to the end of this long job,

I managed to take a few happy snaps of a few bits.

Clutch pedal is sorted.

Manual box in place

Centre console test fitted

Tail Shaft not in yet...

But the best bit is.... IT STARTS!!! The 4wd light is on + the auto light flashes a few times on start up but it stars perfectly and idles fine.

Next the hand brake will be sorted + clutch line and then all i am waiting on is the tail shaft which i was hoping to be done before this week ends but looks like next week.

There are heaps more photo's that have been taken by the mechanic but they will sorted once all is done.

post-104324-0-46529800-1449201327_thumb.jpg

post-104324-0-92760200-1449201329_thumb.jpg

post-104324-0-86703200-1449201331_thumb.jpg

post-104324-0-29537600-1449201333_thumb.jpg

post-104324-0-83227500-1449201334_thumb.jpg

post-104324-0-26467300-1449201336_thumb.jpg

post-104324-0-07656500-1449201338_thumb.jpg

post-104324-0-28954100-1449201342_thumb.jpg

post-104324-0-81058500-1449201343_thumb.jpg

post-104324-0-85038900-1449201608_thumb.jpg

Edited by Beregron
  • Like 9
  • 2 weeks later...

not much but bidding (nengun) "new" air conditioning center panel
I bought already 2din player

xenon reverse lights :rolleyes:

still should put the engine heater.. now outside temprature -15°
:mad:

still should put the engine heatertill should put the engine heater
still should put the engine heater
I bought already 2din player
I bought already 2din player

hey maybe we should rename this thread to " What have you hidden from your missus lately "

so far I've done high flow, ( she knows that one but not the total cost ), brakes, rotors, pads, bov, boost t and sway bars.

sitting in my cupboard I have two Greddy BOV's, new set of plugs, intake coupling and clamps, new fuel pump and strainer, an AMPerformance intake with heat wrap, and lastly an E-Manage Ultimate in a box.

Add it all up and it's a holiday to Thailand.

if she knew I'd be a f**king grease pop. ;)

  • Like 2

It won't run cooler with the Nismo thermostat - it will just take longer to warm up. Stock is best.

Not true actually.

OEM opens at 86deg, so you'll never see it colder than that in normal running.

Nismo opens at 74deg, so my car routinely runs around 80 deg; except in very hot weather.

OEM does keep temps more stable, but only when using an OEM radiator.

Not true actually.

OEM opens at 86deg, so you'll never see it colder than that in normal running.

Nismo opens at 74deg, so my car routinely runs around 80 deg; except in very hot weather.

OEM does keep temps more stable, but only when using an OEM radiator.

how about your car with heavy traffic on 40 degree day?

Edited by YangLIU

how about your car with heavy traffic on 40 degree day?

Your thermostat is not like the unit on the wall that controls your central heating - it just increases the flow through the radiator and once its open the Nismo is no different from the stocker so on a hot day both will be open but the amount of cooling done by the radiator will be exactly the same i.e. a thermostat that opens at a lower temperature will not cool your engine any better than one that opens later once that temperature has been reached.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...