Jump to content
SAU Community

Recommended Posts

Only short term runs in more open circuits, was very hot at the track with >30C, and out in the concrete jungle the heat radiates

Engine 10cm closer to the firewall under the new COTF and appears to just be an over site on cabin temps, guess the spaceframe chassis provides less protection than the chassis of old.

The Merc's weren't expecting to win, minimal testing due to brake failures.

COTF are all new car, Nissan and Merc need to get their head around the COTF parts and engine, holden and ford just the COTF parts as they have proven engines for the last 20 years.

Kind of scary to see how easily the cars peel back when in a crash / hit curbs, sunday qualifying had a great example, super slow mo of HRT hitting the chicane and all the pans separating from the car.

I think they said the longest runs were around 20 laps but don't quote me on that. Also street circuits have an affect on heat. Although the problem is isolated in the foot well there would still be a slight increase

Thats a shame about brake failures.

Just bad luck I guess, since the brakes and pedal boxes are control. Unless you didn't have enough air ducting. Any teams running water cooling, or has that gone with cotf?

Thats a shame about brake failures.

Just bad luck I guess, since the brakes and pedal boxes are control. Unless you didn't have enough air ducting. Any teams running water cooling, or has that gone with cotf?

didn't take any photo's yesterday but we had extra air tubes ect connected to the mirrors going down to the fot well, but i think the damage was done on saturday to everyones feet, check out the pics on Tim Slade's FB page, that's from Saturday's race and he drove with that on the bottom of his foot yesterday

Edited by Whiplash

didn't take any photo's yesterday but we had extra air tubes ect connected to the mirrors going down to the fot well, but i think the damage was done on saturday to everyones feet, check out the pics on Tim Slade's FB page, that's from Saturday's race and he drove with that on the bottom of his foot yesterday

Imagine that on the work cover claim...

Not much time to make corrections. Melbourne is going to be just as hot.

I love the total uncertainty this year (apart from 888). Adds the extra dynamic.

I'm wondering if the rate that they can get fuel into the cars has changed with the change in the location of the fuel tank. Smaller diameter pipe into it perhaps?

It will be a rule for safety rather than an engineering oversight. If the fuel goes in slow you effectivey get a minimum time for pit stops, this means team have time to put the wheels on properly without rushing.

I think it was a great weekend for the new chasis, thumbs up to Skaife and the team for persevering with such a radical change; I certainly was not a believer but ended up watching all of both races, even cheering for that blouse Rick.

Both new cars did well, they will be 5x better next race and 10x better by the end of the year. Congrats in particular to everyone at Erebus for such a good showing with so little time.

On the heat, I am totally amazed they hadn't done long runs in hot weather. If you are spending millions a year, that test would be critical. I'm sure it will be sorted for next race though.

The Merc was still the best looking and sounding car. It should be good watching the new teams climb up the field.

I was surprised to hear Rick moaning about the fuel consumption and lack of power in the Nissans, since Larco's whiteboard said they should all be within 1%....hearing Rick moan in general was no surprise though.

I had heard that Rick was a moaner. From Tod.

I'm sure they can be within 1% of peak power but with substantially different power/torque curves - which makes a big difference.....you would know how painfully different a bush bearing n1 turbo (32/33) is to a ball bearing n1 turbo (34) in race use

It is fair to assume both the nissan and merc have less low down torque and could make more peak power (but are not allowed to)

The marketing is that they all have to have matching torque curve. But all of that tech info is pretty dumbed down by the time it gets to Larco's whiteboard

that was in between the pits for 4-9 and 47 as the 7 commentry team were in the middle ( hence the photo in post 109 ) was very tempted to run in an draw on the board

I stopped watching after the r32's were banned, racing back then was so much more exciting with different production cars having different strengths ie, straight line speed vs cornering and I thought instead of banning the skylines they could have regulated their performance more. Bringing back a Nissan that isn't the skyline after the way they went out last time dosn't make sense to me, these cars now are so far away from being production cars I don't know why they even use commodore or falcon shapes.

I stopped watching after the r32's were banned, racing back then was so much more exciting with different production cars having different strengths ie, straight line speed vs cornering and I thought instead of banning the skylines they could have regulated their performance more. Bringing back a Nissan that isn't the skyline after the way they went out last time dosn't make sense to me, these cars now are so far away from being production cars I don't know why they even use commodore or falcon shapes.

There is a national (and NSW state) production car series if that's what you are looking for! Get along to a track to support it :)

Group A racing was dead the whole way across the world. When will people realise the GTR wasn't banned, the entire category ceased and changed to an entirely different format. It had nothing to do with elliminating the GTR.

The fact nissan aus and Japan are allowing the Kelly's to run as a factory backed team is great. Screw the GTR, screw group A racing (as good as it was its dead and will never be back) nissan have the Altima and wanted to push the car to the public market.

I love my GTR's as much as the next guy but they are intelligible so move on.

The peak of Aussie motor racing is the V8 supercars and the category has made significant changes to appeal to the public. The reality is the majority of Motorsport fans appreciate supercars and enjoy the category. It's the minority's like the nissan fan boys and sierra fan boys that whine and bitch about it.

The cars use the body shells so they can obtain manufacture support. Infant a lot of the panels being used are factory parts.

Group A racing was dead the whole way across the world. When will people realise the GTR wasn't banned, the entire category ceased and changed to an entirely different format. It had nothing to do with elliminating the GTR.

The fact nissan aus and Japan are allowing the Kelly's to run as a factory backed team is great. Screw the GTR, screw group A racing (as good as it was its dead and will never be back) nissan have the Altima and wanted to push the car to the public market.

I love my GTR's as much as the next guy but they are intelligible so move on.

The peak of Aussie motor racing is the V8 supercars and the category has made significant changes to appeal to the public. The reality is the majority of Motorsport fans appreciate supercars and enjoy the category. It's the minority's like the nissan fan boys and sierra fan boys that whine and bitch about it.

The cars use the body shells so they can obtain manufacture support. Infant a lot of the panels being used are factory parts.

There are Sierra fan boys?

But you are right. Group A is long dead. Good riddance too. The cars were brilliant but the racing and the politics were rubbish.

It's funny. If and when there is a GT3 GTR in Australia all the GTR fanboys will praise it for being a GTR and a V8 Supercar killer blah blah and carry on about how its a GTR but a Supercar is just a body shell.

Seriously there is as much GTR in a GT3 skyline as there is ford or holden in a V8 Supercar....

Fair enough they are primarily based on the monocoque chassis but so were the V8's till this year.

Okay fair enough you make a good point but I don't see why you would write "screw the GTR, screw group A racing". You can get your point across without being an as#hole!.

Group A racing was dead the whole way across the world. When will people realise the GTR wasn't banned, the entire category ceased and changed to an entirely different format. It had nothing to do with elliminating the GTR.

The fact nissan aus and Japan are allowing the Kelly's to run as a factory backed team is great. Screw the GTR, screw group A racing (as good as it was its dead and will never be back) nissan have the Altima and wanted to push the car to the public market.
I love my GTR's as much as the next guy but they are intelligible so move on.

The peak of Aussie motor racing is the V8 supercars and the category has made significant changes to appeal to the public. The reality is the majority of Motorsport fans appreciate supercars and enjoy the category. It's the minority's like the nissan fan boys and sierra fan boys that whine and bitch about it.

The cars use the body shells so they can obtain manufacture support. Infant a lot of the panels being used are factory parts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...