Jump to content
SAU Community

Dose Pipe Sutututu

Members
 View Profile  See their activity

  • Posts

    15,503

  • Joined

  • Last visited

  • Days Won

    371

  • Feedback

    100%

 Content Type 

Everything posted by Dose Pipe Sutututu

  1. Dose Pipe Sutututu
    Totally unrelated however this is good info for max torque and lag. Recently, well about 3 months ago I retuned a SR20 with a full TS GTX3071 0.83 setup and it previously had a set of homo BC 264 cams in them. Turbo came on at 4.7k rpm, max torque was about at 6.2k rpm and you could imagine how useless, how shit that would be. Power kept climbing but what for? I had to cut the revs at 8 because still had a hydraulic lifters I advised the owner (again) to go smaller duration cams, he kept saying these cams are responsive blah blah blah. Anyhow he obliged and got basic 256 Poncams. All 1.8bar is now in by about 4200rpm, max torque is now at a sensible 5.4k rpm and car shits out a fun 350kW. #truestory
  2. Dose Pipe Sutututu
    That was more so due to the lift and aggressive cam advance.
  3. Dose Pipe Sutututu
    would flatten out torque at best.. however you need to play with the cam gears heaps to achieve that.
  4. Dose Pipe Sutututu
    smart move... Cams will NOT give you response
  5. Dose Pipe Sutututu
    like a single TS or VCam or Rb25NEO conversion lol... I'm a bit drunk
  6. Dose Pipe Sutututu
    and even though the -9s hit 23psi or so by 4300rpm.. before that magical RPM.. it makes less torque and less power than a diesel Golf.
  7. Dose Pipe Sutututu
    I wouldn't say a dash -9 setup is responsive at all... that's just me.
  8. Dose Pipe Sutututu
    yep Page 7 http://static.shop033.com/resources/F2/13042/Other/Otomoto2015b.pdf
  9. Dose Pipe Sutututu
    you can run the vcam on the halalatech.. however it's just off and on.. like VCT not variable angles like Link/ViPec/Elite/Adaptronic ra ra ra
  10. Dose Pipe Sutututu
    yep.. but I don't get discounts on them.. will just sell as Nistune sells RRP... but you save on shipping if combine... ECU.. no idea.. needs to be powered up.. can't just use the Internet to tell you if it works or not haha
  11. Dose Pipe Sutututu
    your options for response: VCam Single TS Advance intake cam
  12. Dose Pipe Sutututu
    Then putting in longer duration cams won't do what you're after. Advance your intake cam further for more response... or single TS conversion.
  13. Dose Pipe Sutututu
    tune issues man I recently tuned a SR20 making 350kW and it has more response than most RBs lol
  14. Dose Pipe Sutututu
    Don't go 0.63 rear, yuck.
  15. Dose Pipe Sutututu
    Are there enough earth straps from the motor to chassis and also where your battery is, is the earth point nice and solid to the chassis?
  16. Dose Pipe Sutututu
    Forgot to mention has Vifa front splits, Precision rear kevlar rear coaxials, stinger cabling, 1x slim Cadence sub, 1x 4ch Kenwood Amp, 1x Cadence Monoblock and a Pioneer 6xxx head unit. All this contributed to the 1m9s at Wakefield Park - similar to Peter Brock's Polariser.
  17. Dose Pipe Sutututu
    I can supply Nistune boards cheaper than RRP.
  18. Dose Pipe Sutututu
    your Haltech settings aren't ideal anyway If you want to test, I suggest this.. set the TPS to 5%, operating temp from 50c, set point at 1000rpm on both vac and boost then hold the revs about 2k and get someone to pull off the plug see if there's a change on engine note.
  19. Dose Pipe Sutututu
    also minimum TPS of 10% just to be safe
  20. Dose Pipe Sutututu
    set both on points at 1200rpm and max load at 250kpa or 300kpa
  21. Dose Pipe Sutututu
    Can be done with motor held up by gearbox and gearbox on some form of stand as well as those on strut top engine stands (don't know what they're called) then drop the x member followed by the sump. Easier motor out lol
  22. Dose Pipe Sutututu
    refund it.. useless ECU Get a proper ECU or get your stock one modified to accept a Nistune board. I can get it done cheaper than RRP or supply you the board to solder yourself - however I suggest the soldering done by Nistune themselves as the can bench test the ECU prior shipping it back.
  23. Dose Pipe Sutututu
    Phil's S15 has 25psi going into it.. no issue what so ever.. I suspect boiling fluid and you're heating up your ABS unit. Bleed ABS unit easy, crack open the lines up top of the unit and bleed as you would bleed a set of calipers without a one-man bled tool, i.e. pedal down, crack line, close line, pump pedal, pedal down, crack line, close line.. ra ra ra.
  24. Dose Pipe Sutututu
    DIY it man, local cylinder shop here charged one of the trak-life cars $270 to lightly skim the head and install new valve springs.. we took off and supplied the head to them with valve seals, springs.
  25. Dose Pipe Sutututu
    your stock FPR regulates pressure negative to the body is fine
×
×
  • Create New...