Jump to content
SAU Community

Recommended Posts

Get a better regulator, those Sard ones aren't good at dampening the fuel pulsation also they're not E85 friendly. I always install Turbosmart FPR1200 FPRs on cars I work on.

Save you the headache, also because the Adaptronic is semi sequential injection there will be a level of "thumping" from the fuel system. I had to install an additional fuel pulsation damper by Radium to suppress the fuel pulsations to get full control of my injectors. Had leaning out issues in low load, and high rpm areas due to the pulsation not being dampened. 

I guess some of yous already seen, we've started modding RB20det for the next couple of week and see how far we can get before hurting driving ability.

So the car is an 93 model GTS-4, good condition and solid. Its fully stock with an cat back exhaust and a blitz return flow cooler only. Its running a R33 GTST turbocharger at 10psi and it is as slow as it gets. 

enginebay.jpg

rfront.jpg

lfront.jpg

So far I've ordered:

Split fire coil packs

Z32 AFM

470L Walbro pump

JJR front pipe with 100 cell cat

650cc Siemens injectors

Nistune ECU

The first turbo I will be fitting will be an ball bearing ATR43SS-1. 

  • Like 1
4 hours ago, Missileman said:

that's a funny looking R32

 

Yuh.  If the rear guards weren't so pox I'd almost consider doing such a thing to mine.  Although there's so much tupperware on it that I'd inevitably feel bad about doing it.

The worst thing about that particular instance that Stao has bought though is that it appears to have been painted by 3 different people in 3 different locations, then assembled!

Edited by GTSBoy
hopeless spellink.

For the amount of exterior work is not bad. It used to be Jesse Customs personal car two years ago. any way, parts started to arrive and I will update with prices and places.

I'm using siemens 610cc injectors @ $60 each and Walbro 470L pump @ $200 each from Injectorsonline . com

fuelinjpump.JPG

Z32 AFM and plug cost $250 from Dev industries

http://www.hypergearturbos.com/photos/r32/z32afm.JPG

  • Like 3
  • 3 weeks later...
On 18/08/2016 at 2:48 PM, hypergear said:

Here is one more result that are worth posting.

This is from one of my troubled customers whom like many others using stealth setups including a return flow cooler and a silent exhaust. Obviously it made a petty 260rwkws P98 using our ATR43SS2 turbocharger with a massive boost drop. The SS2 however have held a dead flat 20psi on my R33 peeking 302rwkws. Fixing that boost drop problem, he went all the troubles fitting up an External gate that made only a 5kws gain. His disappointment anger and frustration has been directed to the turbo and my self.   

During that time, initial ATR45SAT was first made and tested by Havoc Fabrications at 420rwkws. An upgrade request was made by the customer so the same turbo was built and sent for the exchange of the ATR43SS2 which I'm yet to receive. With nothing else apart from the turbo change and E85, the car made an disappointing 354rwkws, that have sparked more heated conversations, to prove my product I have later managed to use the same turbo beating his E85 result running internal gate on less boost.

Red- My internally gated result vs Blue - under performing externally gated result

vsfarzampower.JPG

vsfarzamboost.JPG

 

Finding out reasons and answers in solving those issues, I have bought my 2nd and 3rd R34, picked the exact same mods used, guess what I ended up with same crappy result. Investigation pointed to the Blitz return flow cooler, the 2.5 inches resonator inside Jap exhausts as well as the EPA approved compliance cat, test results of those are documented in my earlier updates of this thread.

 

A proper front mount cooler is finally fitted, with a good cold air induction system and a free flow exhaust installed. using the same turbocharger the car has now hit 400rwkws on E85 fuel:

power.jpg

Vs controlled result:

atr45sat.jpg

 

enginebay.jpg

 

This is an perfect example of how important it is picking the right supporting and differences it makes to overall performance.

What make is that airbox please?

^ looks like a custom CAI box to suit factory snorkel 

stao, thats a great price on the afm, i cant seem to find Dev industries anywhere :huh:, care to link me up to where i can purchase it ? :banana:

thanks 

Edited by Dan_J
  • Like 1
46 minutes ago, jay-rod said:
Arrived safe and sound, soon to be installed :)
ATR45SAT Ball Bearing for reference :)Capture.JPG

Very cool, internal or external gate? What's the brass fitting on the left?

  • 2 weeks later...

I've had this small issue recently with my ATR43-SS2 (2013) where I occasionally find a drop of oil underneath the front housing. I have checked the water and oil lines and they are all fine and tight. I've also been conscious to wipe the housing clean each time in an effort to pinpoint where it's coming from.

I took the photo below just then, you can see a bit of oil collecting at the edge of the housing and right under one of the housing bolts. It also looks a little wet right around the bolt so I'm wondering if that's the cause? I chucked a 13mm socket in there and tightened it a touch (it turned easy enough) but didn't want to overdo it as I don't know the torque specs.

@hypergear Tao have you seen these turbos spring a leak there before? What's the torque specs on the housing bolts? Cheers

32201403301_8f8ede1f1a_b.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...