Jump to content
SAU Community

KiwiRS4T

Contributor
 View Profile  See their activity

  • Posts

    9,451

  • Joined

  • Last visited

  • Days Won

    7

  • Feedback

    100%

 Content Type 

Everything posted by KiwiRS4T

  1. KiwiRS4T
    Sure? Does it have a Mitsubish (R33) or Hitachi (late r33 or R34) CAS?
  2. KiwiRS4T
    Didn't fill it properly the first time?
  3. KiwiRS4T
    No
  4. KiwiRS4T
    Well if its a 2000 car it should have a Neo engine in it so will be same as R34
  5. KiwiRS4T
    This my RB30 controlled by Link and Mac valve:
  6. KiwiRS4T
    Use this guide but do not use the loop at the back use no 1 coil 25DET, neo all the same:
  7. KiwiRS4T
    Auto fluid passes through a heat exchanger in the bottom of the radiator.
  8. KiwiRS4T
    Sell off the Profec and control boost with the Link through a Mac valve.
  9. KiwiRS4T
    Stock is 1.1mm Are they actually new coils or second hand?
  10. KiwiRS4T
    Grey paving paint
  11. KiwiRS4T
    Nistune chip is the solution.
  12. KiwiRS4T
  13. KiwiRS4T
    Needs twin carbs. What did you do about the coils? At a minimum they need to be thoroughly cleaned and then wrapped in insulating tape - better still replace with OEM or Splitfires only.
  14. KiwiRS4T
    Obviously the R32 engine has small differences from the R33 - no VCT for a start. Yes you can swap the diff centres - make sure you get a mechanical LSD .... the viscous ones are a waste of space. Look down in the transmission section for threads on this. How to tune? Best option = manual conversion! Next best is a Nistune chip for the stock ecu - research and you will find. Otherwise you can piggyback virtually any ECU on to the stock set up.
  15. KiwiRS4T
    Without air it won't run. At idle it won't suck much air - have you tried winding the throttle up? If its not coming in the front intake its coming in somewhere else so just check all the way back to the turbo intake.
  16. KiwiRS4T
    Its hardly going to be a $100 item - go to Nissan or just get on the phone.
  17. KiwiRS4T
    ^^^what he said. Next time it won't start jump out and pull the plug off the AFM and see if st starts then.
  18. KiwiRS4T
    I don't know where the auto ecu is on your cefiro. If it is in the main engine ecu then no you will not be able to use the GTR Link. Why don't you get a wire in Link instead and yes you can use a map sensor with it.
  19. KiwiRS4T
    Fitted straight into my Stagea even with a high mount turbo
  20. KiwiRS4T
    I only know that the wheels are interchangeable so I would guess so.
  21. KiwiRS4T
    Worth a trip to ST Hitec in Auckland or just give them a ring first.
  22. KiwiRS4T
    There is no RB25 Nistune so if you have an RB20 Nistune that will work although it will not control your VCT. If you get a Neo ecu and loom you can get a GTT LinkECU to put inside the Neo case which would be ideal...it can control your VCT and with a solenoid better control boost.
  23. KiwiRS4T
    Yes but it would help if you out your location up.
  24. KiwiRS4T
    Welcome...do you have a car and if so post up a photo and a brief description!!
  25. KiwiRS4T
    What connection? Just run the line from M/C to slave cylinder.
×
×
  • Create New...