Jump to content
SAU Community

Recommended Posts

Custom shroud and 16’ Spal fan. And the battery is being relocated to the boot with a under bonnet surge tank being fitted. All the aftermarket wiring and relays are being  removed and it will all be controlled via a PDM. 
I also bought a PRP coil pack bracket and stalks so I will be able to fit the valley cover back on, it’s been coated and fitted with a new R34 ornament plate. 

FB4F1E6B-3477-409C-86EB-9F3094D0F44B.jpeg

  • Like 3
3 hours ago, Ben C34 said:

Under boner surge tank seems questionable, what's the thinking behind that?

For me, it’s to fill the space where the battery sits once it’s relocated to the boot. Benefits are better and more consistent  Fuel pressure, as the lines from the pumps to the rail are now significantly shorter. The rear of the car reverts back to standard with the only mod being the rubber lines upgraded to something e85 compatible. So no more aftermarket lines from the rear of the car to the front.
I never had this issue but also for set ups that suffer from fuel smell in the cabin, this eliminates that. 
The only downside you might be able to argue is would the tank suffer from heat soak from engine bay heat? I can’t see this being an issue with where it’s mounted, on the cold side of the motor and furthest away from the motor. And it doesn’t just sit in place, it’s mounted in place so can’t move. 
What are your thoughts on it Ben? 

5 hours ago, Old man 32 GTR said:

For me, it’s to fill the space where the battery sits once it’s relocated to the boot. Benefits are better and more consistent  Fuel pressure, as the lines from the pumps to the rail are now significantly shorter. The rear of the car reverts back to standard with the only mod being the rubber lines upgraded to something e85 compatible. So no more aftermarket lines from the rear of the car to the front.
I never had this issue but also for set ups that suffer from fuel smell in the cabin, this eliminates that. 
The only downside you might be able to argue is would the tank suffer from heat soak from engine bay heat? I can’t see this being an issue with where it’s mounted, on the cold side of the motor and furthest away from the motor. And it doesn’t just sit in place, it’s mounted in place so can’t move. 
What are your thoughts on it Ben? 

the heat soak is my main concern. I know drag cars do it, but they are hardly on so not a good reference!

As for the fuel pressure benefit, I dont think that is really an issue is it? Any half decent ecu can compensate for fuel pressure with a sensor (that you would surely run) if there is some discrepancy.

I imagine you have a flex sensor? they measure fuel temp also so depending where it is mounted you will tell if there is a heat soak impact of having the surge tank in the engine bay.

I get it makes for good use of space, but it does seem a bit bad in a crash..... 

  • Like 1
  • 1 month later...

Well, it’s getting there, car is almost done, dash configuration is being completed, (it looks good) and the last bits and pieces are being fitted. With a bit of luck might have it home some time next week. 
 

 

80D0AAC5-F3CC-4122-A131-3F639642EF51.jpeg

  • Like 3
On 22/08/2020 at 4:43 PM, Old man 32 GTR said:

The rear of the car reverts back to standard with the only mod being the rubber lines upgraded to something e85 compatible. So no more aftermarket lines from the rear of the car to the front.

So you're retaining the factory top hat with 5/16 in/out fittings, factory hard lines and 5/16 feed/return from surge tank to main tank ? What intank pump are you running ?

33 minutes ago, BK said:

So you're retaining the factory top hat with 5/16 in/out fittings, factory hard lines and 5/16 feed/return from surge tank to main tank ? What intank pump are you running ?

Yes, I believe this is the case, I know 100% they used the factory top hat and hard lines. I’ll have to look at the invoice to confirm but I believe they used a 255lph pump in main tank and two 460’s in the surge tank. 

21 minutes ago, DaymoR32 said:

That looks amazing!

Thanks Daymo, I’m very happy with the result, not sure if you noticed but there are shift lights in the tacho, oil pressure gauge also gives oil temp, water temp gauge give water pressure, fuel level gauge gives fuel pressure, and where the trip metre should be gives boost. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...