Dose Pipe Sutututu

Not at all man

Have started to pull off shit, compressor cover nearly off bar one freaking bolt. It's really tight and next to the engine mount.

Money well spent would be a flex sensor, a Walbro 460 and E85 friendly injectors.

a C63 AMG? lol

Tried to sell it working, no one wanted it.. now the turbo exploded there's pretty much no chance of selling it. And, if I'm changing the turbo again it's going larger and I might just like the car a tiny bit more.

What worked MCA X-Series Coilovers in 10/7 although Josh advised they were too stiff but I like it how it is Dropping the stiffness of the ARBs - car is now less twitchy Adding more caster to the front, it's now at 9 degrees Installing harden rubber subframe bushes (next time, I'm taking it to a shop, fuuark the DIY) Installing a proper HICAS eliminator kit 350Z Brembo Calipers 1.8bar through the motor worked great, 372kW and no boom. Moving the gate from the rear housing onto the manifold, less back pressure, less shit glowing = 372kW Yes, it was with a new turbo, but it had exactly the same SS2 compressor Moving from a journal bearing to a ceramic ball bearing CHRA same "response" BUT... night/day difference with transient response.. on/off throttle felt nearly like a NA Installing a PWR Radiator... dayammm.. 35+ degree day.. water temp was in check ALL DAY! What didn't work Running stupid thick ARBs with soft as shit springs and Bilsteins, car pitched too much and threw the weight towards the front and turned a perfectly good turn into a drift I was into the whole soft springs, stiff ARBs.. yeah it's great for street use but completely useless on the track Snapped about 3x sets of ARB link brackets when I either went on a ripple strip OR off the track because of the ARBs trying to attenuate the shock movement HICAS Lock bar, completely useless when your hicas ball joints are cooked Running an external gate off the rear housing, thought it was a good idea - nope.. on the dyno the collector/gate was glowing bright red Massive restriction there Gate/housing turned blue Car didn't want to make more than 327kW no matter how much boost/timing I threw at it Journal Bearing turbo, yes it made the power, yes it came on by about 4.1k RPM.. but the transient response was aids. China Radiator, did the job on the street/dyno/cooler track days.. but on a 35 degree day no way. What went bang 1st NPC Carbotic Clutch, turns out previous owner installed the wrong bearing carrier so the clutch was essentially "riding" itself to death Massive thank you to Scott @ Western Clutch - because of my laziness to do the clutch myself the 2nd round I decided to take it to Scott He discovered someone used a VL bearing carrier, it's too tall Clutch Fork was cracked Clutch pivot was fractured Hypergear SS2 Turbo, turbine exploded Completely my fault, they were never meant to be running 1.8bar err day.. but I did A bunch of ARB link brackets Both rear hubs, they're cooked.. makes so much noise now - powahz life ABS Unit died, has been replaced Head Gasket, it's pushing heaps of coolant and exhaust gasses these days when I run 1.8 bar (did run) lol What's Happening? Turbo will be taken off and sent back to Hypergear Head is coming off for a tickle, new valve seals, springs/retainers (maybe) cams... maybe... just tiny ones. New metal headgasket Replacing rear hubs Installing rear traction rods aiming 400kW+ on the stock bottom end

If you want reassurance go onto RB Tech Talk page on Facebook. Every uneducated numpty will tell you it made their car go harder

sounds healthy, real clunky lol 20161210_142005.mp4

I'm a bit drunk atm, but I'll write up a pretty decent response soon At the end of the day, it's still a shit box and it's slow. Would love an Evo 8/9 if someone wants to downgrade to a floating barge with cash their way but no one is that idiotic so the crazy person that I am is throwing more money at it to get the lap times.

wow, I wonder what wanker keeps on saying that? hahahaha

shuu baby, Hypergear is replacing ze turbo for bigger one

only illegal if you get caught LOL

too much boost, better off running the stock 0.4 bar actuator

new turbo will provide more dose 6+6 compressor

You can make that power with less parts and the right parts too. Best to look into something twin scroll, divided rear housing and ball bearing.. I won't throw turbo models around because it would start a holy war LOL

Dose Pipe Needs a Build Thread - Now He Has for Project Le Siet Bok Oh Harros, Might as well start a build thread for v3.0 of my car... yep 'le siet bok' has been through 3 revisions and now v3.0 should be more so track orientated than ever. This post is more so a comparison of when I bought the car and all of it's Autosalon features and now it's ended up now to this present day with the blown turbo. So here goes: How I bought the shit box (still is a shit box now) Like holy shit, who the heck styled the car? a 3 year old kid? anyhow the car also came with a massive bogan southern cross sticker on the back which was hastily removed within 2 hours of owning the car. Had wanky 19" wheels with tyres fit for a Honda, that also was deleted. What I did in about 2 months of owning the car (because it was so embarrassing to drive) Restored Stock Blow off Valve with custom mod Restored Stock Air Box Restored Stock Door Trims with Speaker Grills Restored Parcel Tray Restored Factory Vacuum Hoses Restored Slimline Charcoal Canister Restored A/C Condenser Fan Restored Factory Wiper Blades Deleted Southern Cross Sticker Deleted Unknown workshop stickers Deleted GReddy Turbo Timer Deleted Autometer Cobalt Boost Gauge Deleted Turbosmart Dual Stage Electronic Boost Controller Replaced Wheels with factory R33 GT-R 17×9” wheels Replaced Clutch with NPC 10” Carbotic Button Clutch Replaced Gearbox front and rear seals Replaced ABS Unit Upgraded Rear Anti-roll bar with 27mm R33 GT-R item Upgraded Gear Knob with Nismo Leather item Upgraded Front Pipe with RS*R 3.75” inch item Upgraded Cat Back Exhaust with HKS Super Dragger 3.5” to 3.75” item Upgraded Castor Rods with Whiteline Bushing Castor Rods At that point the car became "drivable" and not giving me a sads each time.. then I took it "testing" at one of the SAU Texi days. What's been done since all that Adaptronic 440 Select ECU Zeitronix ECA Ethanol Kit Innovate MTX-L Wideband & Boost Gauge Blitz Dual SBC EBC (best thing everrrrrr) Engine Guardian Water, Oil Temp, Oil Pressure Gauge Split Fire Coil Packs Hypergear SS2, Externally Gate with the CBB centre Havoc Modified stock manifold Turbosmart 45mm Hypergate Full Custom 3.5" Turbo back to Axle back (still runs a cat, kinda-ish.. not really) Plazmaman Swept Back Intercooler Piping Mocal Oil Cooler with GReddy GREX Sandwich/Thermo Plate PWR 43mm Triple Core Radiator Siemens DEKA V 875cc Top Feed E85 FI Turbosmart FPR 1200 Radium XR Fuel Damper Walbro 460L Fuel Pump ARP non 2000 Head Studs MCA X-R Coilovers with 10kg Front and 7kg Rear Springs Whiteline 24mm ARB Front and Rear Hardrace Front Caster Rods, Rear Camber Arms Hardrace Subframe Bushing TAS Motorsports HICAS Eliminator Kit 350Z Brembo Calipers Up front (OEM Rears) Intima Type-D Pads all round And yes, makes good power and also been using it pretty well as per the video lol (How different does the engine bay look compared to when I first bought the flipping thing)

The stock R34 GTR was aids.. 1 bar by like 3600rpm. I can't imagine bigger twins.. oh wait I can, drove Piggaz' car with the GTRS back like 10 years ago.. was aids lololol

buy an Evo

I guess so, however the SP25 has a 10k km limit and the R33 has a 9k km limit... which is why I find it funny... so "technically" both cars "could" be used the same amount of time. However it does come down to statistics, more crash = higher premiums.

I don't think you need a guide? just drill and mount the box where ever you want?

go to NRMA Vintage Insurance, it's half what you're paying + you get free road side assist/tow if you're 100km+ away from home.

Interesting choice of injectors, but I guess the price point and fitment make it good.

Not bad, would have toed in a little more at the rear if you plan on tracking it but it does smash tyres unfortunately. oh look, I drove your car around Hakone and Mazda Turnpike in November when in Japan haha. Man the stock R34 GTR was so slooowwwwwwwww, lag, transient response sucked balls.

Damn that's gaids. Lucky my R33 shit box modified floating barge is with NRMA Vintage and it cost less than 1/3 the cost of my stock Mazda 3 SP25 lol. R33 is insured for nearly the same price as the SP25. Makes no sense.

$330? come on, cooling pro $186 delivered, gpi ones even less. nothing half arsed with a high flow with stock ecu at less than stock boost. up to you, but you seem like a stubborn person so not sure why you're even asking for advice. put it another stock turbo so it blows up again, waste of time and money