Jump to content
SAU Community

Dose Pipe Sutututu

Members
  • Posts

    15,517
  • Joined

  • Last visited

  • Days Won

    371
  • Feedback

    100%

Everything posted by Dose Pipe Sutututu

  1. Because not running twins.
  2. Can make a JZ brap good too and still retain driveability unlike RB junk lol.
  3. And don't earth the Z32 to the chassis, send both earth/-ve back to sensor ground on the ECU to avoid any issues. And, why not a R35? High reduction in reversion issues. If you're in Sydney and need a base tune/road tune to get your favourite tuner I can provide that service. Even full tunes, however only if there are no issues with wiring, setup etc. (I hate diagnosing faults or fixing people's mistakes).
  4. Will work, but why? Get a stock R34 NEO ECU and Nistune it. Nistune is light years ahead with basic engine protection, full flex support, launch control and boost control. Sell the 1990s Gameboy and benefit from the added features.
  5. Well what pads have you experienced? You have yet to disclose what pads you've used before and how they perform. Because I find it hard to believe the stock 4 pot, 296mm brake setup is failing you on the street with a low powered R33 when there are plenty of other high powered R33s that are required often put to the test on tracks. Yes bigger brakes will be better but why upgrade your brake setup when the initial weakness is actually the pad choice.
  6. Brah it's trak-life not track-life because I'm Asian and cannot spell words properly.
  7. Man, SEO must not be working. 1st article on Google too when you type in "rb25det top feed" http://www.trak-life.com/diy-converting-top-feed-injectors-r33-gts-t-skyline-rb25det/
  8. Yeah, but you've probably never driven a Skyline with good brake pads either.
  9. wait.. you don't need the hats.. 2 piece dur! yeah just measure it man, I can try find you something from DBA
  10. measure the diametre, overall height, thickness and centre hole size.. I can search it up for you and also supply in DBA
  11. danger to manifold! Rather use the OEM thread on the caliper and ever so slightly increase the holes on the uprights
  12. Thread on the 2nd page of FI he states he wants 1000hp+ @Lithium
  13. Yep Here's a guide I wrote a while back too! http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/
  14. yeah would be better as a table with a small plaque with the words "A Real RB Head"
  15. Come to our next track day in September, real men race on the track not the street
  16. You want pricing? I can ask my mate for youse.... actually you may have spoken to him email: hieu (AT) yezracing.com
  17. pour in 10L of E85, car will lean up to somewhere desirable and will suppress knock Alternatively, get that Nistune ASAP and wire in a Zeitronix ECA1/2. If wiring up a Zeitronix just bash off the diagnostic resister and wire the 0-5V output into the diagnostic in on the board (guide on Nistune).
  18. Since your car has cracked the sads do you want Plazmaman FMIC, Plenum, and cold/hot side pipe? Ize gib yew good deal!
  19. Samsonas http://www.samsonas.com/products/6/
  20. Bring it to _ _ _ group, tune done with 888888888888888888
×
×
  • Create New...