Search the Community

hey guys selling more stuff. heres the list R34 GTR Stock AFM - $300 Twin Turbo pipe - $150 R34 GTR Stock Injectors - $200 R34 GTR Air box - $300 Reasonable offers may be considered call or txt 0409076032 kane Also coming soon *Fujitsubo legalise r cat back*

up for grabs is a brand new unused z32 nistune ecu with standed base map on it bought straight from toshi recommended by Nistune. need to sell as unexpected expenses came up rb25 series 2 r33 gearbox no glitterly oil, still looks fresh, gear stick has very minimal play. (120,000k) ecu - $550 pickup or postage gearbox - $1100 pickup only Northern suburbs of Melbourne call chris on 0431613540 Cheers guys

Recently done a few upgrades to my GTR so these parts are no longer needed All prices are negotiable to a degree. Postage at buyers expense Items located in Melbourne Sms for pics: 0401 316 113 R33 GTR Garret turbos: very minimal shaft play, never skipped a beat $450 R33 GTR Dumps: In excellent condition, come with heat sheilds and oxygen sensors. $250 Rb26 AFM: Standard gtr airflow meters, in excellent condition, no rips or tears on the mesh $150 RB26 Cam gears: As with the other items great condition $150 RB26 Standards 440cc injectors: Were running beautifully before I upgraded. $300 Tomei Pod filter adapters: Stainless steel, do not come with pod filters. Suit standard rb26 AFM's Rb26 Fuel pump - was working fine before i upgraded, comes with filter sock $75

just got some used/new parts for sale 1. r33 gtr air box used has a damaged clip but still seals and works check pic asking $100 ono 2. 2 x rb26dett air flow meters both have a bit of mesh damage but i have used them for over 1 1/5 years and had no issuse with them. asking $50 each ono 3. Hks air filter 3 layer only used for about 50km before i got pods, still new asking $50 ono 4. greddy y pipe new never used comes with all the clamps and silicone parts asking $250 ono i can ship items at buyers expense, all items located in brisbane. please contact me on my moblie as i dont always get a chance to check sau as i am at work. 0415298948 cheers goran.

Z32 AFM (Air Flow Meter) for sale! Includes plug and wiring! Good condition! Still has the filter mesh on both ends! Good upgrade! $200 PM if interested.

r34 gtt rb25neo ok so i just finished installing tomei poncams 260deg 9.15mm lift bosch 040 fuel pump z32 afm bosch 750cc injectors power fc im using the standard fuel rail and plenum i started it up fine but she was puffin the black smoke so i assumed it was running way too rich. it now doesnt start prob flooded and spark plugs all carboned up. i have a power fc and have no clue how to just do a basic adjustment of the settings just so she idles and runs so i can get it out for a test drive and then on the trailer to get it tuned professionally. any help would be greatly appreciated.

Hi all I have some left over parts from my old Gtst and some stock gtr bits and pieces to get rid of. The gtst parts need to be gone in 2 weeks or they are going in the bin. All parts in barden ridge, prices probably negotiable. Gtst parts Complete left and right doors, gun metal grey good condition: $50 each, $90 for both Z32 AFM with pod and plug: $200 Front seats: $60 for both Nismo 260km cluster with led backlighting: $150 Stock cluster: $50 Interior carpet: $10 Rear bar and REO: $70 Boot and spoiler: $70 Gtr parts Front and rear seats great condition no tear or collapsed foam: $650 for the lot 2x AFM good condition no holes: $120 Stock 440cc injectors all working: $120 Best mode of contact is pm or email on [email protected] Cheers

Item: Z32 AFM with TRUST AIRINX filter adapter Cond: Used Location: Melbourne, Victoria. Price: $200 0421 nine two seven 250

Nismo Fuel Pressure Regulator $200 ono including postage Brand New, Never Used, Never Fitted. Selling as I didn't end up needing it for my setup. Fully adjustable from 28 - 85psi. It is a DIRECT bolt on upgrade ie no adapter needed and will fit sr20, rb25, and rb26 More info: http://justjap.com/s...248&cat=&page=1 R34 SMIC $100 ono Perfect working order. Comes with pipe & bracket R33 S2 AFM $100 ono Perfect working order. Purchased from SSS Automotive in August and still has 7 months warranty remaining. Includes plug. R33 S2 ECU $100 ono Perfect working order. Pins unbent. Good upgrade for S1 R33 R33 Stock Intake Pipe $30 ono Comes with original clamps (with the hole for the locating nipple) Pick up Blacktown area. Happy to post. Richard - 0421 202 823 Thanks

ok guys few things i found cleaning out the shed. looking for pick up only at the moment from point cook. west of melbourne, or can arrange to possiably meet in docklands where i work. all parts are ono contact me via sms on 0435 755 400 cheers Lee R32 boot lid will fit GTR and GTS T silver in color, paint not 100% $100 standard RB26 top pipe $100 standard RB26 cam cover $80 Some Greddy hoses and hard piping kit. this is NOT the complete kit only what you see $150 standard RB26 AFM not sure if in working condition $150 the pair standard RB26 air box $150 R32 maybe R33 ash tray $60 GTR clutch pedal $50 Blitz BOV $150 the pair standard RB26 plenum $100 RB26 coil cover $70 R32 GTR passanger side head light in good condition $100 Skyline bonnet underlay in good condition with clips $100

various parts off my 260 RS stagea for sale: - 2x stock rb26 turbos (t25) complete with manifold, dumps and actuators, no shaft play, solid as. $400 for both or $250 each - - 2x z32 AFM's (working fine when removed), one just has a crack on the mounting holes as pictured $240 - 2x standard rb26 j70 AFM (working fine when removed), and one has the mesh missing on one side $200 - standard front pipe with some light scrapes on the underside, as pictured $100 -standard 440cc injectors (working fine when removed) $100 - starter motor which i believe suits all RB series motiors but dont quote me on it, the soleoid is gone in this one so would suit a reco if anyone was interested. $10 call or message jay - 0430 504 731 pick up south east melb

Hi Guys, Getting rid of parts, decided to stop wasting money on the car, saving for a bike. Will Post Injectors and AFM, prefer local pickup in Sydney for Clutch, Item 1: Brand New NPC Organic Clutch for R33 GTS-T S1 Supports over 300kw Condition: Brand New, opened for inspection. Price: $630 Firm Item 2: Brand New JECS 660cc Sidefeed Injectors for R33 S1 Condition: Brand New Price: $350 Firm + Post Item 3: Z32 AFM Condition: Used, rear mesh cut out, in working condition, without plug. Price: $100 + post PM Me

Have stock: Radiator $30 AFM $50 Injectors $70 Aftermarket Solid rear diff mounts fit r33/34 (just the front ones not subframe) $20 Located brisbane QLD 0423 424 834

Hi guys, I am fitting an RB25DET 3 pin pink label AFM to an SR20DET. The plug I have for the RB AFM is not an original RB25 plug and so the colours are different. Therefore I can't distinguish which is ground, signal and power as all topics online state wire type based on colours. I need to know in which position they are so I can determine how to wire it up on SR loom. Can someone please show me a photo of an RB25 3 pin AFM plug showing which colour is in which position coming out of the plug please? I could not find a clear image anywhere Cheers Ads

Nissan Skyline R32 GTR RB26DETT AFM Air Flow Sensor 22680 05U00 x 2 $250 ea Control Arm new been stored away for a very long time LH side This is a brand new item Never Used still in original Nissan Plastic it was brought and left in storage for 10 Years plus Part Number: 54525-86L00 Price:$200 Nissan Skyline R32 Igniter Module $220 Located Melbourne Inbox me if interested Can post Australia wide at buyer’s expense

Hi all, sorry if this has been asked before as I'm a new poster but I couldn't find anything after searching. I need to buy a new afm for my R33 gtst series 2 Rb25det (pink label) and I just want to know where I can trust to get one from as eBay sellers say there genuine refurbed etc but I'm unsure, cheers.

Bit of background. So, car had been running rough for the past month or so where I’d get no power on boost at all basically almost felt like it was na. Checked for boost leaks, replaced plugs and coil packs compression test all fine still no progress. After about a month of scratching my head thought I’d check the ignition timing to see if that’s the issue. Got the coil cover off and CAS lose ready to adjust everything but as I went to check it all turns out my shit supercheap timing light decided to stop working. So, I put it all back together making sure to put the CAS back in its original spot so not to stuff everything up. Went for a driver and after about 20 mins car hesitated pretty violently jerking the car a bit. Kind of like fuel cut would feel like. And then 10 seconds later it all goes to shit and starts misfiring like crazy. Its struggling to stay at idle without me giving it some throttle. Then bam like the flick of a switch completely back to normal. and then a minute later it happened again misfiring like crazy. It stalls like twice as I’m trying to get it off the road to a side street its parked now and not starting at all, let her sit for about 5 minutes and tried to start it again. fired up perfectly normally and idled for a few mins completely fine and then again lots of misfiring and it died and wouldn’t start. I came back the next day to see if I could get it home because I only lived 2 mins down the road and f**k getting a tow truck for that. But same thing again stated fine got halfway there and it started to shit itself again, lucky I was on a hill so I could just roll her home. So in a nutshell Car has a intermittent misfire with no specific trigger. comes and goes every few mins. So, since its intermittent like that it’s pretty obvious its not mechanical issue. That seems like a pretty fair statement to make right? Therefore, its most likely a electrical issue. Something to do with a sensor or ecu. My best guess from my research is that its Either the AFM or CAS sensor that’s causing the issues. especially since i was fiddling arounds with the CAS sensor earlier. Does this sound about right to anyone? Thanks

hi guys, about to start a single conversion on my R34 GTR and looking to offload some left over parts i will have. all the parts are currently still fitted to the car and in running order. At the moment im getting expressions of interest so when i pull the car down in approx 1-2 weeks i will have interested parties (hopefully). CES Racing split dump and y-pipe combo to suit NISSAN GTR R32, R33 & R34. “COMPETITION” model - LONGER IN DESIGN WITH DEDICATED "Y" PIECE. Dump pipes are ceramic coated mild steel and y pipe is stainless and uncoated $800 Nissan R34 GTR v-spec factory turbos including all oil and water lines up to the firewall junction . Currently running on the car and in good condition. $400 neg Nissan R34 GTR factory air box with K&N panel filter $250 neg Nissan R34 GTR factory rubber ducting from the afm to the turbos $50 neg? Nissan R34 GTR factory air flow meters x2 $150 neg Nissan R34 GTR factory intercooler hot side Y pipe (twin turbo pipe) $50 all parts are located in Townsville and will be plus freight for anything needing to be sent. thanks adam

Genuine z32 AFM including a Plug in excellent condition, %100 Genuine,mesh is attached on both sides z32 afm's are good for supporting up to 350rwkw+ great upgrade for s13,s14,s15, r32,r33,r34,GTR's in mint condition with the mesh attached on both sides. Price: $230 for the z32 afm including the plug . Price is firm and not negotiable Local Pick up from Glenroy - Melbourne (North Western suburbs) or can post Australia wide for an extra $10 in a Australia post Satchel. call or txt 0422756270

Hi guys, Got 6 brand new still in packaging Sard 540cc injectors suit RB25/SR20. Come with fitting kit (o-rings, collars, plugs etc) Bought as a precaution and no longer needed. Paid $810, asking $550. Also a brand new still in packaging genuine Bosch Z32 AFM with Tomei plug. Paid $330, asking $250. Can MMS photos as required, or inbox them on Facebook as they're "stuck" on my phone and I can't upload them to the forum from my phone? All items brand new, located in Warrnambool Vic. Contact me on here, or 04 3774 51 FOUR SEVEN Mods please delete my other thread regarding the injectors. Cheers!

$200 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB $200 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost $10 Alloy BOV Bung/Plug $10 110L/h Fuel Pump that fits in stock position $40 2x Falken Azensis RT615 225/35/17 with around 3mm tread $50 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310 $200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece $20 RB25DET S2 Factory dump pipe & down pipe $20 RB25DET/RB20DET Factory Manifold $50 RB25DET S2 AFM $20 RB25DET S2 Stock Blow Off Valve $20 RB25DET S2 Radiator $10 RB25DET S2 Fan Clutch $50 RB25DET S2 Stock SMIC & Pipes $200 RB25DET S2 ABS Diff - minus ABS sensor $30 RB25DET S2 Stock Anti Roll bars / Sway Bars $20 RB25DET S2 Rubber Intake Pipe $10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket) $10 RB25DET S2 HICAS Rack & Tie Rods $20 SR20DET S15 Radiator Location: Pick Up Canley Vale, NSW 2166 Contacts: PM or Reply Here Will happily trade for beer. Old Ads (Photos etc.): http://www.skylinesaustralia.com/forums/topic/441585-fs-syd-6x-yellow-jackets-r33-gts-t-s152-rb25det-r34-gt-r-rb26dett-wgnc34-s1-rb25det-ignition-coil-packs/ http://www.skylinesaustralia.com/forums/topic/440769-fs-syd-npc-carbotic-clutch-disc-near-new-rb25det-s2-stock-turbo-r33-rb25det-toshi-remapped-ecu-r33-stock-radiator-sway-bars/ http://www.skylinesaustralia.com/forums/topic/433062-fs-syd-r33-gts-t-part-brake-pads-subframe-collars-wheels-gauge-holder-misc/

All parts located Newcastle NSW, but happy to post any items but buyer will pay postage. More pictures of items available here in this imgur photo album, don't want to clutter the thread too much. http://imgur.com/a/ldtzx/all <-- CLICK FOR PICS PM me or can also be contacted on 0437 one 3370 one R32/33 GTR Apexi Power FC Commander ECU L-Jetro, hand controller is included - $750 R34 GT-T NIStune ECU - $600 Greddy profec B spec 2 electronic boost controller $250 R34 OP6 standard turbo, absolutely perfect condition ran on my car for 2 years with zero issues, took it off once to get it inspected for piece of mind and got told it was in mint condition - $350 Z32 AFM, genuine item ran perfect on my RB25 - $200 RB20/25 intake pipe with no provision for BOV, great iff you run no BOV makes the piping look much tidier - $30 R34 intake pipe - $30 R33 S2 throttle body, great for R34 when you want to get rid of the traction control, makes everything look much tidier - $50 R34 throttle body including traction control TPS - $40 R32 climate control unit, working when removed from my car, missing one of the buttons $FREE

Hi there, i'm trying to identify physically the difference between the bnr32 afm and the bcnr33 afm. i've searched around and can't find it...even using paul's powerfc guide. or are they exactly the same just differing model number? cheers in advance. Gaz

R34 NIStune ECU and Z32 AFM ECU was sent to Matt @ NISTune to have the board installed, was then returned and went straight into my car. Tuned by Trent @ Chequered tuning in Melbourne and made 312kw @ 20psi with Z32 AFM. I am now in need of a car with MAP sensor functionality so i have outgrown this. It is a very very capable ECU and great if you want to keep your street car mods very discreet, remove the NIStune sticker and the police will never know its modified Z32 was purchased BRAND NEW and only used for maybe 4000km's if lucky. Same reason for upgrade. NISTune ECU $500 Z32 AFM $230 Happy to post at buyers expense, located Newcastle NSW. Contact Josh 0437 one 33701

Hi there i'm chasing some oem parts for my skyline project. Location SYDNEY NSW Looking for the following; RB20DET throttle body RB20/25/26/30 flywheel RB20DET starter motor 32 GTS-t indicators pair 32 GTS-t wiper motor RB20/S1 RB25 AFM RB20DET engine mount brackets (don't need the engine mounts) RB20DET air box If you have any of the following please throw me a PM with a picture, price and location! Thanks Willis